CE1200H
DESCRIPTION:
Embedded Conference System
As a phone coupler output and input ports, support funcons of remote conference call. 3 set of audio
signal output terminal, can be external or sound recording equipment. It can be installed level on the
desktop or in the 19-inch standard rack.
With four groups of 8 p - DIN sockets: used in the system of mul-channel meeng unit connecon, 60
group meeng unit, standard configuraon can be connected with the load and short circuit protecon
funcon.
System has a high, medium and low tone adjustment funcon, the receiver output volume adjustment
funcons. Built-in video interface, can be connected by the central processing unit (CPU), and camera
which has the funcon of video image locang and tracking unit which can realize video tracking funcon.
CE1200H series of portable embedded conference system is designed to funcon room only need the
congress system, meeng with basic funcon, with small and light, installaon is simple to use. System
including control host, chairman of the meeng, guest conference units and on-demand matching the
peripheral equipment, parts through the T connecon cable connecon. Each meeng the uit has the
microphone open closed, speech indicator funcon. This system configuraon is simple and can sasfy the
needs of all kinds of large, medium and small conference, at the same me considering the demands of
customer’s higher future, only increase the corresponding peripheral equipment and soware, this system
can be upgraded to discuss video tracking meeng system.
Equipped with a microphone to speech at the same me the number of limit funcon. In this control host
has a “1",”2",”3",”5" limit speech and "FREE" (full open) FREE speech several meeng mode selecon.
When choosing a microphone is open, can be applied to answer first. The chairmen unit open is not
restricted by a number of the microphone.
CE1200H
20Hz - 80KHz
>98dB
485 X 50 X 325mm
5.15KG
Input Voltage 24V (Host Power Supply)
Cross Talk >87dB
Embedded Conference System
<0.03%
-
1
-
2
