Philips SC1991/00 Kasutusjuhend

Register your product and get support at

www.philips.com/welcome

Always here to help you

User manual

SC1992

SC1991

5

SC1992, SC1991

ENGLISH 6

БЪЛГАРСКИ 25

EESTI 47

HRVATSKI 66

MAGYAR 85

LIETUVIŠKAI 105

LATVIEŠU 124

SLOVENSKY 143

SRPSKI 163

6

Introduction

Congratulations on your purchase and welcome to Philips! To fully benet

from the support that Philips offers, register your product at

www.philips.com/welcome.

Light-based hair removal is one of the most effective methods to

treat unwanted body hair with longer-lasting results. It is different from

current home hair removal methods because it signicantly reduces hair

regrowth. Philips has been investigating this method together with leading

dermatologists for over 15 years. You can now use this innovative technology

comfortably in the privacy of your own home, whenever you want.

This appliance has been specically designed and optimised for use by

women, but can be used by men as well.

Philips Lumea Essential enables treatment of unwanted hair on body areas

below the neckline.

Philips Lumea Essential is designed for use by one person only.

For more information about Philips Lumea Essential, see www.philips.com/

lumea. Check our homepage regularly for updates.

Benets

This appliance provides the following benets:

Intense Pulsed Light (IPL) technology for home use

Philips Lumea Essential uses a light-based technology called ‘Intense Pulsed

Light’ (IPL). IPL is also used in the professional beauty market for hair removal

and has been in use for the last fteen years. Philips Lumea Essential now

brings this innovative technology to the comfort of your home.

Effective hair regrowth prevention for everyday smoothness

This method provides you with long-lasting hair regrowth prevention and

silky-smooth skin. Our studies have shown a signicant hair reduction after

just two treatments. Optimal results were generally achieved after four

to ve treatments. A reduction in hair density is visible from treatment to

treatment. How fast the effect becomes visible and how long the results

last varies from person to person. For more information, see section ‘How

to achieve optimal results’ in chapter ‘Using the appliance’.

Gentle treatment, even on sensitive body areas

Philips Lumea Essential has been developed in close cooperation with

leading dermatologists for an effective and gentle treatment, even on the

most sensitive body areas.

No replacement parts needed, no hidden costs

Philips Lumea Essential is equipped with a high-performance lamp which

does not require replacement. This lamp can generate over 100,000 ashes

and should enable you to continuously maintain results for more than

5 years* while saving money on expensive replacement lamps.

*Based on average usage scenario and recommended treatment regime for

one user.

ENGLISH

How Philips’ Intense Pulsed Light technology works

Hair growth

Hair growth rates differ from person to person, depending on age,

metabolism and other factors. However, everyone’s hair normally grows in

3 phases.

1 Growing phase (anagen phase)

The hair grows actively from the root. In this phase the concentration of

melanin is highest. Melanin is responsible for the pigmentation of the hair.

Melanin concentration is also the determining factor for the efcacy of

the Intense Pulsed Light technology. Only hairs in the growing phase are

susceptible to treatment with light.

2 Degradation phase (catagen phase)

Hair growth stops and the root shrinks before the hair sheds.

3 Resting phase (telogen phase)

The old hair separates from its hair follicle and sheds. The follicle remains

at rest until the biological clock tells it to become active again and grow a

new hair.

Working principle

- The appliance works by heating up the hair and root beneath the skin.

The melanin in the hair and hair root absorbs the released light pulses.

The darker the colour of the hair, the more light can be absorbed.

This process stimulates the hair to go into the resting phase.

- In between treatments, hair sheds naturally and regrowth is inhibited.

Hairs can take one or two weeks to shed.

- Optimal hair removal cannot be obtained with a single session, since

only hairs in the growing phase are susceptible to treatment with light.

During a treatment, hairs on the treated area are usually in different

stages of the hair growth cycle. To effectively treat all hairs you have to

repeat the treatment once every two weeks for the rst two months.

An integrated optical lter ensures that no UV light reaches the skin

and ensures that the appliance is safe for the skin.

ENGLISH 7

General description (Fig. 5)

1 Intensity lights (1- 5)

2 On/off button

3 ’Ready to ash’ light

4 Air vents

5 Appliance socket

6 Flash button

7 Openings for electronic contacts

8 Light exit window with integrated UV lter

9 Electronic contacts

10 Body attachment (suitable for all body areas below the neck)

11 Metallic frame inside the body attachment

12 Integrated safety system

13 Adapter

14 Small plug

15 Pouch

Also included: cleaning cloth

Important

Read this user manual carefully before you use the appliance and save it for

future reference.

Danger

- Water and electricity are a dangerous combination. Do not use this

appliance in wet surroundings (e.g. near a lled bath, a running shower

or a lled swimming pool).

- Keep the appliance and the adapter dry.

- If the appliance is broken, do not touch any inner part to avoid electric shock.

- Never insert any objects into the appliance.

Warning

- This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, unless they have

been given supervision or instruction concerning use of the appliance

by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with

the appliance.

- The appliance is not intended for children under the age of 15 years.

Teenagers aged between 15 and 18 years can use the appliance with

the consent and/or assistance of their parents or the persons who have

parental authority over them. Adults from 19 years and older can use

the appliance freely.

- Only use the adapter supplied.

- Do not use the appliance or the adapter if it is damaged.

- The adapter contains a transformer. Do not cut off the adapter to

replace it with another plug, as this causes a hazardous situation.

- If the adapter is damaged, always have it replaced with one of the

original type in order to avoid a hazard.

- Do not use the appliance if the glass of the light exit window is broken.

ENGLISH8

To prevent damage

- Make sure nothing obstructs the air ow through the ventilation slots.

- Never subject the appliance to heavy shocks and do not shake or drop it.

- If you take the appliance from a very cold environment to a very warm

environment or vice versa, wait approximately 3 hours before you use it.

- Store the appliance in the pouch supplied so that it does not become dusty.

- Never leave the appliance unattended when it is switched on.

Always switch off the appliance after use.

- Do not expose the appliance to direct sunlight or UV light for several

hours, to prevent damage.

- Do not ash against any other surface than the skin. This can cause

severe damage to the body attachment and/or the light exit window.

Only ash when the appliance is in contact with skin.

Caution

- Never use the appliance around the eyes and near the eyebrows to

avoid the risk of eye damage.

- Use this appliance only at settings suitable for your skin type (see the

table in section ‘Recommended light intensities’ of chapter ‘Preparing

for use’). Use at higher settings than those recommended can increase

the risk of skin reactions and side effects.

- This appliance is only intended for removing unwanted human body

hair from areas below the neckline. Do not use it for any other

purpose.

- Make sure the skin in the area to be treated is clean, dry and free from

creams, lotions and other cosmetics. If the skin is not clean and dry,

the integrated safety system may not work as intended and the

appliance may not ash or may ash unintentionally.

Keep the following things in mind to avoid compromising

the lifetime of your Philips Lumea Essential:

- Do not expose the appliance to ambient temperatures lower than

15°C or higher than 35°C during use.

- The appliance is equipped with a built-in overheat protection. If the

appliance overheats, it does not ash. Do not switch off the appliance,

but let it cool down for approx. 15 minutes before you continue with

your treatment. After 5 minutes the appliance switches off automatically.

Then let it cool down for another 10 minutes.

- Always return the appliance to a service centre authorised by Philips

for examination or repair. Repair by unqualied people could cause an

extremely hazardous situation for the user.

- Do not use the appliance if any of the situations mentioned in section

‘Contraindications’ apply to you.

Electromagnetic elds (EMF)

This Philips appliance complies with all applicable standards and

regulationsregarding exposure to electromagnetic elds.

ENGLISH 9

Contraindications

For whom is Philips Lumea Essential NOT suitable?

Philips Lumea Essential is not designed for everyone. If any of the following

is true for you, then this appliance is not suitable for you to use!

Do not use the appliance if you are pregnant or breast feeding.

Philips Lumea Essential has not been tested on pregnant women, therefore

we advise you not to use the appliance if you are pregnant or breast

feeding. Hormonal changes could increase the sensitivity of your skin and

the risk of injury to the skin.

Never use the appliance if you have an unsuitable skin and/or

hair colour, i.e.:

- If you are of skin type V (you rarely get sunburnt, you tan very well and

your skin colour is dark brown) or if you are of skin type VI (you rarely

or never get sunburnt and you tan very darkly; your skin colour is

brownish black or darker). In this case you run a high risk of developing

skin reactions, such as discolourations, strong redness or burns, when

you use Philips Lumea Essential. See also chapter ‘Using the appliance’,

section ‘Possible side effects and skin reactions’ and consult the

‘Recommended light intensities table’ in the quick start guide.

- If your natural hair colour in the treatment areas is light blond, white,

grey or red. The treatment will not be effective.

Never use the appliance if you suffer from any of the diseases

listed below, i.e.:

- If you have a skin disease such as active skin cancer, you have a history

of skin cancer or any other localised cancer in the areas to be treated.

- If you have pre-cancerous lesions or multiple atypical moles in the areas

to be treated.

- If you have a history of collagen disorder, including a history of keloid

scar formation or a history of poor wound healing.

- If you have a history of vascular disorder, such as the presence of

varicose veins or vascular ectasia in the areas to be treated.

- If your skin is sensitive to light and easily develops a rash or an allergic

reaction.

- If you have infections, eczema, burns, inammation of hair follicles,

open lacerations, abrasions, herpes simplex, wounds or lesions and

haematomas in the areas to be treated.

- If you have had surgery in the areas to be treated.

- If you have epilepsy with ashlight sensitivity.

- If you have diabetes, lupus erythematodes, porphyria or congestive

heart disease.

- If you have any bleeding disorder.

- If you have a history of immunosuppressive disease (including HIV

infection or AIDS).

ENGLISH10

Never use the appliance if you take any of the medications

listed below, i.e.:

- If your skin is currently being treated with or has recently been treated

with Alpha-Hydroxy Acids (AHAs), Beta- Hydroxy Acids (BHAs),

topical isotretinoin and azelaic acid.

- If you have taken any form of isotretinoin such as Accutane

®

or Roaccutane

®

in the last six months.This treatment can make skin

more susceptible to tears, wounds and irritations.

- If you are on painkillers, which reduce the skin’s sensitivity to heat.

- If you are taking photosensitising agents or medications, check the

package insert of your medicine and never use the appliance if it is

stated that it can cause photo-allergic reactions, photo-toxic reactions

or if you have to avoid sun when taking this medicine.

- If you take anticoagulation medications, including heavy use of aspirin,

in a manner that does not allow you to stop using them at least one

week prior to each treatment with Lumea.

- If you take immunosuppressive medications.

Never use the appliance on the following areas:

- On the face.

- On nipples, areolas, labia minora, vagina, anus and the inside of the

nostrils and ears. See chapter ‘Using the appliance’, section ‘Using the

appliance in the bikini area’.

- Men must not use it on the scrotum or face.

- Over or near anything articial like silicone implants, pacemakers,

subcutaneous injection ports (insulin dispenser) or piercings.

- On moles, freckles, large veins, darker pigmented areas, scars or other

skin anomalies without consulting your doctor. This can result in a burn

and a change in skin colour, which makes it potentially harder to identify

skin-related diseases (e.g. skin cancer).

- On warts, tattoos or permanent make-up. This can result in a burn and

a change in skin colour (hypopigmentation or hyperpigmentation).

- On areas where you use long-lasting deodorants. This can result in skin

reactions. See chapter ‘Using the appliance’, section ‘Possible side effects

and skin reactions’.

Never use the appliance on sunburnt, recently tanned (last 2 weeks)

or fake-tanned skin

- All types of tanning can inuence the safety of the treatment.

This applies to exposure to natural sunlight as well as articial tanning

methods, such as tanning lotions, tanning appliances etc. If you are

tanned or are planning to tan, see chapter ‘Preparing for use’,

section ‘Tanning advice’.

Note: This list is not exhaustive. If you are not sure whether you can use

the appliance we advise you to consult a doctor.

ENGLISH 11

Preparing for use

For optimal results, prepare the areas on which you intend to use the

appliance in the manner described below.

Preparing treatment areas

1 Shave the areas you intend to treat as long as these areas still show

hair regrowth.

Note: Do not use depilatory creams instead of shaving.

Note: If your last depilation method involved removing hairs by the roots (e.g

epilating), you can start the treatment right away. In this case, we advise you to

shave in between treatments for optimal results.

Please note that treatment on unshaved or improperly shaved

areas has a number of undesired effects:

- The light exit window and body attachment may become

contaminated with stray hairs and dirt. A contaminated light exit window

and body attachment can reduce the life and efcacy of the appliance.

Contamination of the light exit window can also cause the treatment to

become painful or cause skin reactions like redness and discolouration.

- Hairs on your skin can burn, which can result in an unpleasant smell.

2 Clean your skin and make sure it is hair-free, entirely dry and free

from oily substances (e.g. residues of deodorants, lotions, perfumes,

tanning creams and sunscreens).

3 Check the appliance, especially the light exit window and

body attachment, for trapped hair, dust and bres. If you see any 

contamination, clean the appliance according to the instructions in

chapter ‘Cleaning and maintenance’.

If shaving causes wounds or lesions, your skin may be more sensitive 

to IPL than that of others. This may cause the IPL treatment to feel 

uncomfortable or it may lead to other unwanted side effects. We advise

you to wait until the irritation has disappeared.

4 Once the hairs stop growing back, which usually happens after

4-5 treatments, you no longer have to shave before you use the

appliance.

Light intensity

Unlike professional light-based appliances, Philips Lumea Essential has been

developed for consumer use and its light pulses are gentler. Therefore you

can expect a convenient and effective treatment at a light intensity that

you nd comfortable.

Philips Lumea Essential provides ve different light intensities. Adjust the

light intensity to your skin and body hair colour and to a level you nd

comfortable.

The recommended light intensities table below helps you to establish the

right light intensity.

1 Consult the table below to determine which light intensities are

appropriate for your skin and body hair colour.

Tip: You can put the table in the quick start guide on your skin and compare

it with your skin colour.

ENGLISH12

Tip: We advise you to store the quick start guide in the pouch for future reference.

2 Reduce the light intensity if you experience any pain or discomfort.

Persons with darker skin run a higher risk of skin irritation because their 

skin absorbs more light. Therefore lower intensities are recommended 

for persons with darker skin.

The light pulse can feel warm or hot on the skin but should never be 

painful. Different body areas may require different light intensities, see

to the table below. To prevent skin reactions, see chapter ‘Using the 

appliance’, section ‘Possible side effects and skin reactions’.

Recommended light intensities (1-5)

In the table below, ‘x’ means that the appliance is not suitable for you.

Note: The colour of your skin may change, for example because your skin

has been exposed to tanning. It may then be darker than during the previous

treatment. Therefore it is important that you check the setting to be used

before every treatment and per area. Some areas may be darker than others.

Body hair colour: Dark blond/light brown/

brown/dark brown/black

white/grey/red/light

blond

Skin colour and characteristics:

White (always sunburn, no tanning) 4/5 x

Beige (easy sunburn, minimal tanning) 4/5 x

Light brown (sometimes sunburn, good tanning) 4/5 x

Mid brown (rarely sunburn, fast and good tanning) 1/2/3 x

Dark brown (rarely sunburn, very good tanning) x x

Brownish black and darker (rarely to never

sunburn, very dark tanning)

x x

Important

To check whether Philips Lumea Essential is suitable for you, see section

‘For whom is Philips Lumea Essential not suitable?’.

Tanning advice

- Avoid sunbathing when you use Philips Lumea Essential

regularly (every two weeks).

Sunbathing can cause skin to darken (tan) or can cause sunburn (reddening

of the skin). Using Philips Lumea Essential on darkened (tanned) and/or

sunburned skin increases the risk of adverse side effects and skin reactions. See

chapter ‘Using the appliance’, section ‘Possible side effects and skin reactions’.

- Sun exposure before treatment: Wait 2 weeks and perform

a skin test.

Wait at least 2 weeks after sunbathing before you use the appliance.

Perform a skin test (see chapter ‘Using the appliance’, section ‘First use and

skin test’) on the area to be treated to determine the appropriate light

intensity. Failure to do so increases the risk of developing skin reactions

after treatment with Philips Lumea Essential.

ENGLISH 13

- Sun exposure after treatment: Wait 48 hours before

sunbathing after treatment with Philips Lumea Essential.

Wait at least 48 hours after treatment before you expose treated areas

to the sun. Even after 48 hours, make sure that the treated skin shows no

adverse reaction to the treatment before you expose it to the sun. Cover

treated areas when you go out into the sun or use a sunblock (SPF 30+)

in the two weeks after treatment. Exposing treated areas to sunlight

without protection immediately after treatment increases the risk of

adverse side effects and skin reactions. See chapter ‘Using the appliance’,

section ‘Possible side effects and skin reactions’.

- Tanning with articial light

Follow the instructions in ‘Sun exposure before treatment’ and

‘Sun exposure after treatment’ above.

- Tanning with creams

If you have used an articial tanning lotion, wait until the articial tan has

fully disappeared before you use Philips Lumea Essential.

Note: For more details on unwanted skin reactions, see chapter ‘Using the

appliance’, section ‘Possible side effects and skin reactions’.

Using the appliance

Check the recommended light intensities table in chapter ‘Preparing for

use’, section ‘Light intensity’ to determine which light intensities are most

suitable for your skin and body hair colour.

Shave the area you intend to treat before you use the appliance

(see chapter ‘Preparing for use’, section ‘Preparing treatment areas’).

If the treatment becomes painful at any point in time, reduce the 

light intensity setting until the treatment is comfortable again. If you 

notice skin reactions stronger than slight redness, stop the treatment

immediately and read section ‘Possible side effects and skin reactions’

in this chapter.

First use and skin test

When you use the appliance for the rst time or after recent tanning,

we advise you to perform a skin test on each area to be treated to check

your skin’s reaction to the treatment and to get accustomed to light-based

treatment.

1 Choose an area close to the area you intend to treat.

2  Insert the small plug into the appliance and put the adapter in the 

wall socket.

Note: Make sure the body attachment is placed on the appliance.

3  Press the on/off button to switch on the appliance.

ENGLISH14

, Intensity light 1 goes on.

Note: The appliance always automatically selects the lowest light intensity

setting. See section ‘Light intensity’ in chapter ‘Preparing for use’ to determine

the appropriate light intensity.

4  To adjust the light intensity setting, press the on/off button one 

or more times until you have reached the required setting.

The corresponding intensity light lights up.

5  Place the appliance at a 90° angle on the skin so that the body 

attachment is in contact with the skin.

Tip: For easier use, stretch the area of skin you want to treat.

, The ‘ready to ash’ light on the back of the appliance starts blinking 

to indicate that the appliance is getting ready to release a ash. 

, When the appliance is ready to release a ash, the ‘ready to ash’ 

light lights up green continuously.

6  Press the ash button to release a ash.

Note: The visible light produced by the appliance is the reection of the ash

on the skin and is harmless to your eyes. It is not necessary to wear goggles

during use. Use the appliance in a well-lit room; this reduces the perceived

brightness of the ash.

7  Release the ash button once the appliance has ashed.

8 Slide the appliance over the skin to the next area to be treated.

As long as it feels comfortable (not painful), increase the setting by

one level within the recommended range for your skin type and

apply one ash for each setting. Do not apply more than one ash 

on the same spot.

9  When you have nished the treatment, press and hold the on/off 

button for 2 seconds to switch off the appliance.

10 After the skin test, wait for 24 hours and check your skin for

any reaction. If your skin shows reactions, choose the highest setting 

that did not result in any skin reaction for subsequent use.

ENGLISH 15

Subsequent use

1 Before every treatment, clean the body attachment, the light exit

window and the metallic frame inside the body attachment. For more

information see chapter ‘Cleaning and maintenance’.

2 Start each treatment by selecting the light intensity very carefully,

based on your skin’s sensitivity and on how comfortable treatment

feels. See section ‘Recommended light intensities’ to select the right

setting for your skin type and hair colour combination.

Note: Your skin may react differently on different days/occasions for a number

of reasons. See section ‘Possible side effects and skin reactions’ in this chapter

for more information.

3  Follow steps 2-6 of the previous section (‘Before rst use and skin test’).

Note: It is normal that the appliance and the body attachment become warm

during use.

4 Slide the appliance over the skin to the next area to be treated

and repeat steps 5 and 6 of section ‘First use and skin test’ in this

chapter. After each ash, it takes up to 3.5 seconds until the appliance 

is ready to ash again. The ‘ready to ash’ light on the back of the 

appliance starts blinking again to indicate that it is charging. Wait until

this light lights up continuously before you continue.

Tip for SC1992: The SC1992 has a ‘slide and ash’ feature: for a more efcient

treatment, keep the ash button pressed while you slide the appliance over

your skin.

Do not treat exactly the same area multiple times during one session.

This does not improve the effectiveness of the treatment, but increases 

the risk of skin reactions.

5  To avoid untreated areas, make sure the ashes are produced close 

to each other. Note that effective light only comes out of the light

exit window. However, always make sure you do not ash the same 

area twice.

6  When you have nished the treatment, press and hold the on/off 

button for 2 seconds to switch off the appliance.

7 Check the light exit window and the body attachment for hairs and

dirt and clean the appliance after use (see chapter ‘Cleaning and

maintenance’).

Tips

How to achieve optimal results

- It is normal that hairs are still visible after the rst few treatments (see

chapter ‘Introduction’, section ‘Working principle’ for more information).

- To remove all hairs successfully and prevent the hair follicle from

becoming active again, the treatments have to be repeated once every

two weeks for the rst two months. Your skin should be smooth and

hair-free by then. Please read section ‘Maintenance phase’ to nd out

how you can keep these results.

ENGLISH16

Maintenance phase

- To ensure that your skin stays smooth and hair-free, we advise you

to repeat the treatment every four to six weeks. The time between

treatments may vary based on your individual hair regrowth and also

across different body areas. If too many hairs grow back between

treatments, simply shorten the treatment interval again, but do not

treat any area more often than once every two weeks. When you use

the appliance more frequently than recommended, you do not increase

the effectiveness but you do increase the risk of skin reactions.

Guidelines for treatment

Average treatment time

Area Approx. treatment time

Underarms 1 minute per underarm

Bikini line 1 minute per side

Entire bikini area 4 minutes

One lower leg 8 minutes

One full leg 14 minutes

Note: The average treatment times above have been observed during research

and tests. Individual treatment times may vary from person to person.

Intended treatment areas

The appliance is intended to treat unwanted hairs from the underarms,

arms, stomach, bikini area and legs. It should not be used on the face.

Using the appliance on the legs

Check the recommended light intensities table in chapter ‘Preparing for

use’, section ‘Light intensity’ to see which settings are suitable for your legs.

- You can move the appliance up and down or across the leg, whichever

is more convenient to you. In order to maintain full contact with the

skin you can also place and hold the appliance on your skin sideways.

Note: Bony areas like shinbone and ankles are more sensitive than other areas

of the body. When you press the body attachment hard onto these areas, the

skin can be more susceptible to skin reactions, such as skin irritation and

redness. See section ‘Possible side effects and skin reactions’ in this chapter.

Press the body attachment onto the skin just hard enough to make the ‘ready

to ash’ light go on, but not harder.

Using the appliance in the bikini area

Check the recommended light intensities table in chapter ‘Preparing for use’,

section ‘Light intensity’ to see which settings are suitable for your bikini area.

In principle, Philips Lumea Essential is safe and gentle enough for treatment

of the entire bikini area (e.g. for ‘Brazilian’ or ‘Hollywood’ style). Use a lower

setting on darker pigmented, more sensitive skin in the bikini area. Do not

use the appliance on inner labia, vagina and anus. Men who wish to treat

their pubic area must not use the appliance on the scrotum.

Note: For hygienic reasons, always clean the body attachment before you start

treating another body area (see chapter ‘Cleaning and maintenance’).

ENGLISH 17

Using the appliance on the underarms

Check the recommended light intensities table in chapter ‘Preparing for

use’, section ‘Setting the light intensity’ to see which settings are suitable for

your underarms.

Make sure you remove any deodorant, perfume, cream or other skin care

product from your underarms before treatment.

Tip: To achieve optimal results on your underarms, stand in front of a mirror to

get a good view of the area to be treated and the ‘ready to ash’ light. Raise

your arm and place your hand on the back of your neck to stretch the skin in

the underarm area.

Note: The reected light does not harm your eyes. If the scattered light is

unpleasant, close your eyes when you release a ash.

Possible side effects and skin reactions

Common skin reactions:

- Your skin may show slight redness and/or may prickle, tingle or feel

warm. This reaction is absolutely harmless and disappears quickly.

- A skin reaction similar to sunburn may occur on the treated area for a

short while. If this does not disappear within 3 days, we advise you to

consult a doctor.

- Dry skin and itching may occur due to shaving or a combination of

shaving and light treatment. This is harmless and disappears within a

few days. You can cool the area with an ice pack or a wet facecloth.

If dryness persists, you can apply a non-scented moisturiser on the

treated area 24 hours after the treatment.

Rare side effects:

- Burns, excessive redness and swelling: these reactions occur rarely and

are usually the result of using a light intensity that is too high for your

skin colour. If these reactions do not disappear within 3 days, we advise

you to consult a doctor. Wait with the next treatment until the skin has

healed completely and make sure you use a lower light intensity.

- Skin discolouration: this occurs very rarely. Skin discolouration manifests

itself as either a darker or lighter patch than the surrounding area.

This is the result of using a light intensity that is too high for your skin

colour. In rare instances (usually a result of using too high intensity on

too dark skin), the effects of a pigment change can last longer than is

usually observed. In all cases, the effects are eventually reversed. Do not

treat discoloured areas until the discolouration has disappeared and

your skin has regained its normal skin colour.

- Skin infection and inammation: This occurs very rarely and may be

caused by using the appliance on wounds or cuts that resulted from

shaving, on already existing wounds or on ingrown hairs.

- Excessive pain: this can occur during or after treatment if you have

used the appliance on unshaved skin, if you use the appliance at a light

intensity that is too high for your skin colour, if you ash the same

area more than once and if you use the appliance on open wounds,

inammations, infections, tattoos, burns, etc. See chapter ‘Important’,

section ‘Contraindications’ for more information.

ENGLISH18

After use

- Do not apply any perfumed cosmetics to the areas treated immediately

after treatment.

- Do not use deodorant immediately after treating the underarms. Wait

until any skin redness has disappeared completely.

- See chapter ‘Preparing for use’, section ‘Tanning advice’ for information

about sun exposure and articial tanning.

Cleaning and maintenance

To ensure optimal results and a long life for the appliance, clean the 

appliance before and after each use and, if necessary, also during the

treatment. The appliance loses its effectiveness if you do not clean it 

properly.

Never clean the appliance or any of its parts under the tap or in

the dishwasher.

Never use scouring pads, abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the appliance.

Never scratch the light exit window or the metallic frame inside the

body attachment.

Note: Stop using the appliance when it is no longer possible to clean the light

exit window or the body attachment.

1 Switch off the appliance, unplug it and let it cool down.

Note: The light exit window becomes hot during use. Make sure it has cooled

down before you clean it.

2  To remove the body attachment, grab the projections at the top and 

bottom and pull gently.

3  If necessary, clean the outside of the appliance with the soft cleaning 

cloth supplied with the appliance.

4 Moisten the soft cloth supplied with the appliance with a few drops

of water and use it to clean the following parts:

- the light exit window

- the outside surface of the body attachment

- the metallic frame inside the body attachment

Make sure that the electronic contacts do not get wet.

Note: If water does not clean effectively, use a few drops of high-percentage

alcohol to clean the parts mentioned above.

Note: Make sure you clean the appliance before and after each use and,

if necessary, also during the treatment according to the instructions in this

section.

ENGLISH 19

Storage

1 Switch off the appliance, unplug it and let it cool down.

2 Clean the appliance before you store it.

3 Store the appliance in the pouch supplied at a temperature between

-20°C and +70°C.

Tip: We advise you to store the quick start guide in the pouch for future reference.

Ordering accessories

To buy accessories or spare parts, visit www.shop.philips.com/service

or go to your Philips dealer. You can also contact the Philips Consumer

Care Centre in your country (see the worldwide guarantee leaet for

contact details).

Spare parts

The following spare parts are available:

- Body attachment

- Adapter

- Cleaning cloth

- Pouch

Environment

- Do not throw away the appliance with the normal household waste

at the end of its life, but hand it in at an ofcial collection point for

recycling. By doing this, you help to preserve the environment.

Guarantee and support

If you need information or support, please visit www.philips.com/

support or read the separate worldwide guarantee leaet.

ENGLISH20

Leht laaditakse ...

Philips SC1991/00 Kasutusjuhend

Philips SC1991/00 Kasutusjuhend

teistes keeltes

Seotud paberid