AtlasSound.com
2/2
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2010 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are property of their respective owners. ATS003255 RevA 3/10
General Description
Environment-resistant SM Series loudspeaker systems offer quality
sound reproduction and contemporary styling in a compact enclosure.
System components consist of a highly efficient woofer section and
FerroFluid cooled, titanium dome high frequency device. Vocal and
musical clarity are optimized by the mathematically conceived, advanced
design of the Atlas Sound TRX Control WaveGuide
™
high frequency
director. This design provides smooth, even sound coverage (65˚H x
65˚V). The high frequency section is symmetrical, for equal coverage
in both vertical and horizontal cabinet mounting positions. The Atlas
Sound PolyGuard
™
protection circuit provides high frequency component
protection. To withstand the harshest environments, the Strategy Series
SM82T surface mount loudspeakers are constructed of weather resistant
materials: UV-resistant, talc impregnated, polypropylene injection
molded cabinets; HYCONE Treated Paper woofer cones; powder coated
aluminum grilles and all brass hardware. The Strategy Series speaker
systems include a versatile, yet simple, C-bracket designed to provide
easy vertical or horizontal installation on just about any surface. A
5
⁄8"-
27 threaded hole is provided on the C-bracket to allow the SM82T
speaker to be mounted on any Atlas Sound microphone stand for near-
field live sound applications. Four, 4
1
⁄4" x 2" OC brass inserts are also
provided on the rear of the SM82T-B and SM82T-WH to accommodate
OMNIMOUNT
™
30 series brackets. (Model 30.0 WB recommended for
wall mounting)
All inserts for mounting knobs are standard
1
⁄4"–20 to allow easy
substitution of off-the-shelf vandal-proof torx head or “one-way”
hardware. Input connectors include a two pole barrier strip with wire
capture “caps” capable of accepting up to two #16AWG cables. 0.94,
1.9, 3.7, 7.5, 15, 30 and 60 watt taps, plus a transformer bypass setting
for direct coupled 8Ω operation are screwdriver selectable via a sealed
switch located near the input section on the rear of the cabinet. A
tongue-in-groove cover with rubber wire exit grommet is provided to
protect the input connections and transformer switch assembly from
moisture. Systems are available in black or white and may be painted to
accommodate any architectural considerations.
Installation Considerations:
Care should be taken to ensure that the chosen mounting surface is
strong enough to support the SM82T-B and SM82T-WH.Under eave
installation is recommended to ensure that the SM82T-B and SM82T-WH
is not exposed to direct precipitation.
Architect & Engineer Specifications
The indoor / outdoor loudspeaker system shall be Atlas Sound Model
SM82T_____(-B or -WH) or approved equal. Assemblies shall consist
of a 2-way woofer and tweeter, within environment-resistant housings
constructed of paintable UV-resistant, talc impregnated, polypropylene,
injection molded plastic finished in black (SM82T-B) or white (SM82T-
WH). Each unit shall include a stamped, powder coated aluminum grille
and removable C-shaped mounting bracket. All hardware inserts shall
be brass and threaded
1
⁄4"-20. The 150 Watt RMS system shall have
a 8" (133mm) HYCONE
™
treated woofer and a 1" exit compression
type tweeter. The dividing network crossover frequency shall be 2.5
kHz. The dividing network shall include protection circuits for the high-
frequency component. Each unit shall include an internally mounted 60
watt 70.7/100V line matching transformer for use in distributed sound
applications wattage taps and be screwdriver selectable via a sealed
switch located near the input section. Wattage taps shall be 0.94,
1.9, 3.7, 7.5, 15, 30, 60 @ 70.7V plus transformer bypass setting for
direct coupled 8-ohm operation. The loudspeaker system shall meet
the following performance criteria: Power handling, 150 Watts RMS;
Frequency response, 65Hz – 20kHz (±3dB); Sensitivity, 92dB SPL at one
watt, 100Hz to 10kHz measured at a distance of one meter on axis. Input
connectors shall include a two-pole barrier strip capable of accepting
up to two #14AWG cable. A tongue-in-groove cover with rubber wire
exit grommet shall be provided to protect the input connectors. The
loudspeaker system shall exhibit no performance or cosmetic degradation
after a 100 hour salt spray test per ASTM B117. The unit shall be 16
1
⁄2"
high x 9
1
⁄16" wide x 8
7
⁄16" deep.
SM82T-B