2 Connect the AC adaptor cable to the DC
IN Jack on the main unit and the power
outlet.
3 Switch on the TV and set to the correct
video-in channel.
➜ You can consult the owner's manual of
your TV. (If your TV does not have Audio
and Video inputs, you will need to
purchase a RF modulator. Please consult
your dealer.)
1 Attach the main unit and the second screen
to the back of the front seat headrests.
2 Connect the supplied AV cable to the AV
OUT jack on the main unit and the AV IN
jack on the second screen.
3 Connect the supplied car adaptor cable to
the DC IN jacks on the main unit and the
second screen, and to the car cigarette
lighter socket.
Prepare (for in-car use)
1
Quick start guide
Philips Portable DVD Player PET7432
1 Slide the ON/OFF switch to ON to switch
on the main unit.
2 Slide OPEN 2 on the main unit.
3 Remove the protective card (if any) and load
a disc with the label side facing up.
4 Close the disc compartment.
➜ Playback will start automatically. If not,
press 2; /OK.
5 To stop playback, press 9.
2
Enjoy
Note:
During play, you can:
– Press OPTION to select some play options:
audio, subtitle, repeat, and time display.
– Press BRIGHTNESS on the main unit or
rotate BRIGHTNESS -/+ on the second
screen to adjust brightness of screen to match
lighting conditions.
1
Prepare (for domestic use)
Connect additional equipment (TV for
example)
1 Connect the AV OUT socket on the main
unit to the video and audio sockets on a TV
as shown directly.
Printed in China WK0911
TV
Main unit
Red
Yellow
Not supplied
Second screen
AV cable
Car adaptor
cable
Cigarette
lighter
White
Note:
– This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel(charging of the
DVD player only possible in the power-off
mode).
PET7432-Eng_QSG.qxd 3/17/09 11:34 Page 1
-
1
Philips PET7432/05 Kasutusjuhend
- Tüüp
- Kasutusjuhend
- See käsiraamat sobib ka
teistes keeltes
- English: Philips PET7432/05 User manual