Qazqa Kasbah Kasutusjuhend

1. Shut off main electrical supply.

2. & 3. Use screws to mount the bracket on the ceiling.

4. Connect the electrical cable provided with the lamp with the mains wire.

5. Install the ceiling canopy on the mounting bracket using the two canopy

screws.

6. This lamp has a centre body comprising of 2 lamp holders which takes

2x E27 Bulbs. Install the 2 bulbs on the lamp holders.

7. Carefully use the set screws provided with the lamp to install the

Crystal fitting on the top gallery.

8. Once the fitting is complete as shown in the below image, power on the

Chandelier for use.

Assembly:

Kasbah HL 35 Gold

97799

3 & 4

2 & 3

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN.

(NL) Gebruikte symbolen

(GB) Safety Precautions / (FR) Symboles utilisés / (DE) Verwendete Symbole / (PL) Stosowane symbole / (NO) Brukte symboler /

(DK) Brugte symboler / (SE) Anuända symboler / (FI) Käytetyt symbolit ./ (IT) Simboli usati / (ES) Simbolos empleados

(CZ) Použité symboly / (PT) Símbolos uilizados / (GR)

Max. ø45mm

2x E27 Max. 40W

IP20

220-240V~

50Hz

Laadige alla PDF