Von Duprin HL6T-7500 Paddle Mounting Template

Von Duprin
Bränd
Von Duprin
Mudel
HL6T-7500 Paddle Mounting
Tüüp
Template
7/8"
(22mm)
1-3/4" (44mm)
1-11/16"
(43mm)
3-3/8"
(86mm)
1-3/8"
(35mm)
1-7/8"
(48mm)
2-3/4" (70mm) Backset
Mortise Lock
Fold Line
Drill 1" (25mm) Ø thru
Drill 1-5/16" (33mm) Ø
for cylinder if needed
Wood Door: Drill 5/16" (8mm) Ø
on outside of door
(2 places)
Metal Door: Drill and tap for #10-32
on outside of door
(2 places)
Wood Door: Drill 1/4" (6mm) Ø thru &
c'sink 7/16" 82° on device side of door
(2 places)
Metal Door: Drill and tap for #10-32
on outside of door
(2 places)
NOTES:
1. Fold on dotted line.
2. Place fold on low edge of bevel.
3. Line up C mortise lock with centerline of mortise lock cutout on door.
4. Center punch for appropriate holes.
5. Drill holes.
L
829364-00_c PG1
TEMPLATE
NUMBER:
DATE:
06-01-16
HL6T-7500 VERTICAL & HORIZONTAL
PADDLE MOUNTING TEMPLATE
1-3/8"
(35mm)
1-7/8"
(48mm)
2-3/4" (70mm) Backset
Mortise Lock
Fold Line
Drill 1" (25mm) Ø thru
Drill 1-5/16" (33mm) Ø
for cylinder if needed
Wood Door: Drill 5/16" (8mm) Ø
on outside of door
(2 places)
Metal Door: Drill and tap for #10-32
on outside of door
(2 places)
Wood Door: Drill 1/4" (6mm) Ø thru &
c'sink 7/16" 82° on device side of door
(2 places)
Metal Door: Drill and tap for #10-32
on outside of door
(2 places)
3-3/8" (86mm)
1-11/16" (43mm)
7/8"
(22mm)
1-3/4"
(44mm)
NOTES:
1. Fold on dotted line.
2. Place fold on edge of bevel.
3. Line up C mortise lock with centerline of mortise lock cutout on door.
4. Center punch for appropriate holes.
5. Drill holes.
L
829364-00_c PG2
TEMPLATE
NUMBER:
DATE:
06-01-16
HL6T-7500 VERTICAL & HORIZONTAL
PADDLE MOUNTING TEMPLATE
  • Page 1 1
  • Page 2 2

Von Duprin HL6T-7500 Paddle Mounting Template

Von Duprin
Bränd
Von Duprin
Mudel
HL6T-7500 Paddle Mounting
Tüüp
Template
Laadige alla PDF
aruanne

Muud dokumendid