AEG BE5014721M Kasutusjuhend

Kategooria
Pliidid
Tüüp
Kasutusjuhend
User Manual 2
Kasutusjuhend 37
EN
ET
BE5014321
BE5014701
BE5014721
BE501472J
CONTENTS
1. SAFETY INFORMATION...........................................................................................3
2. SAFETY INSTRUCTIONS.......................................................................................... 4
3. PRODUCT DESCRIPTION........................................................................................ 6
4. BEFORE FIRST USE...................................................................................................7
5. DAILY USE..................................................................................................................7
6. CLOCK FUNCTIONS.............................................................................................. 11
7. USING THE ACCESSORIES....................................................................................12
8. ADDITIONAL FUNCTIONS....................................................................................16
9. HINTS AND TIPS..................................................................................................... 17
10. CARE AND CLEANING........................................................................................ 29
11. TROUBLESHOOTING...........................................................................................32
12. INSTALLATION..................................................................................................... 35
13. TECHNICAL INFORMATION...............................................................................36
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
www.aeg.com2
1. SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible if an incorrect
installation and use causes injuries and damages. Always
keep the instructions with the appliance for future
reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
If the appliance has a child safety device, we
recommend you activate it.
Cleaning and user maintenance shall not be made by
children without supervision.
Children of less than 3 years should be kept away
unless continuously supervised.
1.2
General Safety
Only a qualified person must install this appliance and
replace the cable.
Internally the appliance becomes hot when in
operation. Do not touch the heating elements that are
in the appliance. Always use oven gloves to remove or
put in accessories or ovenware.
Before maintenance cut the power supply.
ENGLISH 3
Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric
shock.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
Only use the core temperature sensor recommended
for this appliance.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Obey the installation instruction
supplied with the appliance.
Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
Do not pull the appliance by the
handle.
Keep the minimum distance from the
other appliances and units.
Make sure that the appliance is
installed below and adjacent safe
structures.
The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
2.2 Electrical connection
WARNING!
Risk of fire and electrical
shock.
All electrical connections should be
made by a qualified electrician.
The appliance must be earthed.
Make sure that the electrical
information on the rating plate agrees
with the power supply. If not contact
an electrician.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
Do not let mains cables to come in
touch with the appliance door,
specially when the door is hot.
The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
www.aeg.com4
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
If the mains socket is loose, do not
connect the mains plug.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
This appliance complies with the
E.E.C. Directives.
2.3 Use
WARNING!
Risk of injury, burns and
electrical shock or explosion.
Use this appliance in a household
only.
Do not change the specification of
this appliance.
Make sure that the ventilation
openings are not blocked.
Do not let the appliance stay
unattended during operation.
Deactivate the appliance after each
use.
Be careful when you open the
appliance door while the appliance is
in operation. Hot air can release.
Do not operate the appliance with
wet hands or when it has contact with
water.
Do not apply pressure on the open
door.
Do not use the appliance as a work
surface or as a storage surface.
Open the appliance door carefully.
The use of ingredients with alcohol
can cause a mixture of alcohol and air.
Do not let sparks or open flames to
come in contact with the appliance
when you open the door.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the
appliance.
To prevent damage or discoloration
to the enamel:
do not put ovenware or other
objects in the appliance directly
on the bottom.
do not put aluminium foil directly
on the bottom of the appliance.
do not put water directly into the
hot appliance.
do not keep moist dishes and
food in the appliance after you
finish the cooking.
be careful when you remove or
install the accessories.
Discoloration of the enamel has no
effect on the performance of the
appliance. It is not a defect in the
sense of the warranty law.
Use a deep pan for moist cakes. Fruit
juices cause stains that can be
permanent.
This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
Always cook with the oven door
closed.
2.4 Steam Cooking
WARNING!
Risk of burns and damage to
the appliance.
Do not open the appliance door
during steam cooking. Steam can
release.
2.5 Care and cleaning
WARNING!
Risk of injury, fire, or damage
to the appliance.
Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
ENGLISH 5
Make sure the appliance is cold.
There is the risk that the glass panels
can break.
Replace immediately the door glass
panels when they are damaged.
Contact the Service.
Be careful when you remove the door
from the appliance. The door is
heavy!
Clean regularly the appliance to
prevent the deterioration of the
surface material.
Remaining fat or food in the
appliance can cause fire.
Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal
objects.
If you use an oven spray, obey the
safety instructions on the packaging.
Do not clean the catalytic enamel (if
applicable) with any kind of
detergent.
2.6 Internal light
The type of light bulb or halogen
lamp used for this appliance is only
for household appliances. Do not use
it for house lighting.
WARNING!
Risk of electrical shock.
Before replacing the lamp, disconnect
the appliance from the power supply.
Only use lamps with the same
specifications.
2.7 Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the
mains supply.
Cut off the mains cable and discard it.
Remove the door catch to prevent
children and pets to get closed in the
appliance.
3. PRODUCT DESCRIPTION
3.1 General overview
8
5
6
14
13
11
12
10
5
4
1
2
3
32 41
9
7
1
Control panel
2
Knob for the oven functions
3
Electronic programmer
4
Knob for the temperature
5
Water drawer
6
Heating element
7
Socket for the core temperature
sensor
8
Lamp
9
Fan
10
Shelf support, removable
11
Draining pipe
12
Water outlet valve
13
Shelf positions
14
Steam inlet
www.aeg.com6
3.2 Accessories
Wire shelf
For cookware, cake tins, roasts.
Baking tray
For cakes and biscuits.
Grill- / Roasting pan
To bake and roast or as pan to collect
fat.
Core temperature sensor
To measure how far the food is
cooked.
Telescopic runners
For shelves and trays.
4. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
4.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
1. Clean the appliance before first use.
2. Put the accessories and the
removable shelf supports back to
their initial position.
4.2 Setting the time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few
seconds the display shows the software
version.
After the software version goes off, the
display shows and "12:00". "12"
flashes.
1. Press or to set the current
hour.
2. Press
to confirm. This is necessary
only when you set the time for the
first time. Later the new time will be
saved automatically after 5 seconds.
The display shows and the set
hour. "00" flashes.
3. Press or to set the current
minutes.
4. Press to confirm. This is necessary
only when you set the time for the
first time. Later the new time will be
saved automatically after 5 seconds.
The display shows the new time.
4.3 Changing the time
You can change the time of day only if
the oven is off.
Press .
The set time and symbol flash in the
display.
To set a new time, refer to "Setting the
time".
4.4 Preheating
Preheat the empty appliance to burn off
the remaining grease.
1. Set the function
and the
maximum temperature.
2. Let the appliance operate for 1 hour.
3. Set the function and the
maximum temperature.
4. Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow is sufficient.
5.
DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Retractable knobs
To use the appliance, press the control
knob. The control knob comes out.
ENGLISH 7
5.2 Activating and
deactivating the appliance
It depends on the model if
your appliance has knob
symbols, indicators or
lamps:
The indicator comes on
when the oven heats up.
The lamp comes on when
the appliance operates.
The symbol shows whether
the knob controls one of
the cooking zones, the
oven functions or the
temperature.
1. Turn the knob for the oven functions
to select an oven function.
2. Turn the knob for the temperature to
select a temperature.
3. To deactivate the appliance turn the
knobs for the oven functions and
temperature to the off position.
5.3 Oven functions
Oven function Application
Off position The appliance is off.
Fast Heat Up To decrease the heat-up time.
True Fan Cook-
ing
To bake on up to 3 shelf positions at the same time and
to dry food. Set the temperature 20 - 40 °C lower than
for Conventional Cooking.
Pizza Setting To bake food on 1 shelf position for a more intensive
browning and a crispy bottom. Set the temperature 20
- 40 °C lower than for Conventional Cooking.
Conventional
Cooking
To bake and roast food on 1 shelf position.
Bottom Heat To bake cakes with crispy bottom and to preserve food.
Defrost To defrost frozen food.
Grilling To grill flat food and to toast bread.
Fast Grilling To grill flat food in large quantities and to toast bread.
Turbo Grilling To roast larger meat joints or poultry with bones on 1
shelf position. Also to make gratins and to brown.
www.aeg.com8
Oven function Application
True Fan +
Steam
To steam dishes.
5.4 Fast heat up function
The fast heat up function decreases the
heat up time.
1. Set the fast heat up function. Refer to
the Oven functions table.
2. Turn the knob for the temperature to
set the temperature.
An acoustic signal sounds when the
appliance is at the set temperature.
The fast heat up function does
not deactivate after the
acoustic signal. You must
deactivate the function
manually.
3. Set an oven function.
5.5 Display
A B C
D
EFG
A) Timer
B) Heat-up and residual heat indicator
C) Water drawer (selected models only)
D) Core temperature sensor (selected
models only)
E) Door lock (selected models only)
F) Hours / minutes
G) Clock functions
5.6 Buttons
Button Function Description
CLOCK To set a clock function.
MINUS To set the time.
MINUTE MINDER To set the MINUTE MINDER. Hold the
button for more than 3 seconds to acti-
vate or deactivate the oven lamp.
PLUS To set the time.
TEMPERATURE To check the oven temperature or the
temperature of the core temperature sen-
sor (if applicable). Use only while an oven
function is in operation.
5.7 Heat-up indicator
When you activate an oven function, the
bars in the display come on one by
one. The bars show that the oven
temperature increases or decreases.
ENGLISH 9
5.8 Steam Cooking
1. Set the function .
2. Press the cover of the water drawer
to open it. Fill the water drawer with
water until the Tank Full indicator
comes on.
The maximum capacity of the tank is 900
ml. It is sufficient for approximately 55 -
60 minutes of cooking.
Use only water as the liquid.
Do not use filtered
(demineralised) or distilled
water. Do not use other
liquids. Do not put flammable
or alcoholic liquids (grappa,
whisky, cognac, etc.) into the
water drawer.
3. Push the water drawer into its initial
position.
4. Prepare the food in the correct
cookware.
5. Set the temperature between 130 °C
and 230 °C.
Steam cooking does not give good
results in temperatures above 230 °C.
WARNING!
Wait a minimum of 60 minutes
after each use of the steam
function in order to prevent
hot water from exiting the
water outlet valve.
Empty the water tank after the steam
cooking is completed.
5.9 Water tank indicator
When the steam cooking operates, the
display shows water tank indicator. Water
tank indicator shows the level of the
water in the tank.
- Water tank is full. An acoustic
signal sounds when the tank is full.
Press any button to stop the acoustic
signal.
- Water tank is half full.
- Water tank is empty. An acoustic
signal sounds when the tank must be
refilled.
If you put too much water into
the tank, the safety outlet
moves the excess water to the
bottom of the oven. Remove
the water with a sponge or a
cloth.
5.10 Emptying the water tank
CAUTION!
Make sure that the appliance
is cool before you start to
empty the water tank.
1. Prepare the draining pipe (C),
included in the same package with
the user manual. Put the connector
(B) onto one of the ends of the
draining pipe.
2. Put the second end of the draining
pipe (C) into a container. Put it at a
lower position than the outlet valve
(A).
B
C
A
3. Open the oven door and put the
connector (B) into the outlet valve
(A).
4. Push the connector again and again
when you empty the water tank.
The water tank can have some
water when the display shows
symbol. Wait until the
water flow from the water
outlet valve stops.
5. Remove the connector from the valve
when the water stops flowing.
Do not use the drained water
to fill the water tank again.
www.aeg.com10
6. CLOCK FUNCTIONS
6.1 Clock functions table
Clock function Application
TIME OF DAY To set, change or check the time of day. Refer to "Set-
ting the time".
MINUTE MINDER Use to set a countdown time (maximum 23 h 59 min).
This function has no effect on the operation of the ap-
pliance. You can set the MINUTE MINDER at any time,
also if the appliance is off.
DURATION To set how long the appliance operates. Use only when
an oven function is set.
END To set when the appliance must deactivate. Use only
when an oven function is set. You can use Duration and
End at the same time (time delay), if the appliance is to
be activate and deactivate automatically later.
Press again and again to
switch between the clock
functions.
To confirm the settings of the
clock functions, press or
wait 5 seconds for an
automatic confirmation.
6.2 Setting the DURATION or
END
1. Press again and again until the
display shows
or .
or flashes in the display.
2. Press
or to the set the values
and press to confirm.
For Duration first you set the minutes
and then the hours, for End first you
set the hours and then the minutes.
An acoustic signal sounds for 2 minutes
after the time ends.
or symbol
and time setting flash in the display. The
oven stops.
3. Turn the knob for the oven functions
to the off position.
4. Press any button to stop the acoustic
signal.
If you press when you set
the hours for DURATION ,
the appliance goes to setting
of the END function.
6.3 Setting the MINUTE
MINDER
1. Press .
and "00" flash in the display.
2. Press
or to set the MINUTE
MINDER.
First you set the seconds, then the
minutes and then the hours.
At first, the time is calculated in minutes
and seconds. When the time you set is
longer than 60 minutes, the symbol
comes on in the display.
The appliance now calculates the time in
hours and minutes.
3. The MINUTE MINDER starts
automatically after five seconds.
After 90% of the set time, an acoustic
signal sounds.
4. When the set time ends, an acoustic
signal sounds for two minutes.
"00:00" and flash in the display.
Press any button to stop the acoustic
signal.
ENGLISH 11
If you set the MINUTE
MINDER when the
DURATION or END function
operates, the symbol
comes on in the display.
6.4 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on
immediately when the oven starts to
heat.
To reset the Count Up Timer, press and
hold and . The timer starts to count
up again.
The Count Up Timer cannot
be used with the functions:
Duration , End , Core
Temperature Sensor.
7. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
7.1 Using the core
temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
The oven temperature. Refer to the
table for roasting.
The core temperature. Refer to the
table for the core temperature sensor.
CAUTION!
Only use the core
temperature sensor supplied
with the appliance, or genuine
replacement parts.
1. Set the oven function and the oven
temperature.
2. Put the point of the core temperature
sensor (with the symbol on the
handle) into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the top of
the cavity.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
When you use the core temperature
sensor for the first time, the default core
temperature is 60 °C. While flashes,
you can use the knob for the
temperature to change the default core
temperature.
The display shows the symbol of the core
temperature sensor and the default core
temperature.
4. Press to save the new core
temperature, or wait 10 seconds for
the setting to be saved automatically.
The new default core temperature is
displayed during the next use of the core
temperature sensor.
When the meat is at the set core
temperature, the symbol for the core
temperature sensor and the default
core temperature flash. An acoustic
signal sounds for two minutes.
www.aeg.com12
5. Press any button to stop the acoustic
signal.
6. Remove the plug of the core
temperature sensor from the socket.
Remove the meat from the
appliance.
7. Deactivate the appliance.
WARNING!
Be careful when you remove
the tip and plug of the core
temperature sensor. The core
temperature sensor is hot.
There is a risk of burns.
Every time you put the core
temperature sensor in the
socket, you need to set the
core temperature time again.
You cannot select the
duration and end time.
When the appliance calculates
the provisional duration time
for the first time, the symbol
flashes in the display.
When the calculation ends,
the display shows the duration
of the cooking. Calculations
run in the background during
the cooking and the duration
value in the display is updated
if necessary.
You can change the temperature at any
time during the cooking:
1. Press: :
One time - the display shows the
set core temperature which
changes every 10 seconds to the
current core temperature.
Two times - the display shows the
current oven temperature which
changes every 10 seconds to the
set oven temperature.
Three times - the display shows
the set oven temperature.
2. Use the knob for the temperature to
change the temperature.
7.2 Telescopic Runners
Keep the installation
instructions for the telescopic
runners for future use.
With telescopic runners you can put in
and remove the shelves more easily.
CAUTION!
Do not clean the telescopic
runners in the dishwasher. Do
not lubricate the telescopic
runners.
1. Pull out the right and left hand
telescopic runners.
°C
2. Put the wire shelf on the telescopic
runners and carefully push them into
the appliance.
°C
Make sure you push back the telescopic
runners fully in the appliance before you
close the oven door.
ENGLISH 13
7.3 Accessories for steam
cooking
The steam kit accessories are
not supplied with the
appliance. For more
information, please contact
your local supplier.
The dietary baking dish for steam
cooking functions
The dish consists of a glass bowl, a lid
with a hole for the injector tube (C) and a
steel grill to put at the bottom of the
baking dish.
Glass bowl (A)
Lid (B)
The injector and the injector tube
C
D
"C" is the injector tube for steam
cooking, "D" is the injector for direct
steam cooking.
Injector tube (C)
Injector for direct steam cooking (D)
Steel grill (E)
Do not put the hot baking dish on
cold / wet surfaces.
Do not put cold liquids in the baking
dish when it is hot.
www.aeg.com14
Do not use the baking dish on a hot
cooking surface.
Do not clean the baking dish with
abrasives, scourers and powders.
7.4 Steam cooking in a dietary
baking dish
Put the food onto the steel grill in the
baking dish and put the lid on it.
1. Put the injector tube into the special
hole in the lid of the dietary baking
dish.
C
2.
Put the baking dish onto the second
shelf position from the bottom.
3. Put the other end of the injector tube
into the steam inlet.
Make sure that you do not crush the
injector tube or let it touch a heating
element on the top of the oven.
4. Set the oven for the steam cooking
function.
7.5 Direct steam cooking
Put the food onto the steel grill in the
baking dish. Add some water.
CAUTION!
Do not use the lid of the dish.
ENGLISH 15
WARNING!
Be careful when you use the
injector when the oven
operates. Always use oven
gloves to touch the injector
when the oven is hot. Always
remove the injector from the
oven when you do not use a
steam function.
The injector tube is specially
made for cooking and does
not contain dangerous
materials.
1. Put the injector (D) into the injector
tube (C). Connect the other end into
the steam inlet.
2. Put the baking dish onto the first or
second shelf position from the
bottom.
Make sure that you do not crush the
injector tube or let it touch a heating
element on the top of the oven.
3. Set the oven for the steam cooking
function.
When you cook food such as chicken,
duck, turkey, kid or large fish, put the
injector (D) directly into the empty part of
the meat. Make sure that you do not
cause a blockage of the holes.
For more information about steam
cooking, refer to the cooking tables for
steam cooking in the chapter "Hints and
Tips".
8.
ADDITIONAL FUNCTIONS
8.1 Using the Child Lock
The Child Lock prevents an accidental
operation of the appliance.
1. Do not set an oven function.
2. Press and hold and at the
same time for 2 seconds.
An acoustic signal sounds. SAFE comes
on in the display.
To deactivate the Child Lock, repeat step
2.
8.2 Using the Function Lock
You can activate the Function Lock
function only when the appliance
operates.
The Function Lock prevents an
accidental change of the temperature
and time settings of a running oven
function.
1. Select an oven function and set it
according your preferences
2. Press and hold and at the
same time for 2 seconds.
An acoustic signal sounds. Loc comes on
in the display.
To deactivate the Function Lock, repeat
step 2.
www.aeg.com16
Loc comes on in the display
when you turn the knob for
the temperature or press a
button. When you turn the
knob for the oven functions,
the appliance deactivates.
When you deactivate the
appliance while the Function
Lock is on, the Function Lock
switches automatically to the
Child Lock. Refer to "Using
the Child Lock".
8.3 Residual heat indicator
When you deactivate the appliance, the
display shows the residual heat indicator
if the temperature in the oven is more
than 40 °C. Turn the knob for the
temperature left or right to show the
oven temperature.
8.4 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some
time if an oven function operates and
you do not change any settings.
Temperature (°C) Switch-off time (h)
30 - 115 12.5
Temperature (°C) Switch-off time (h)
120 - 195 8.5
200 - 245 5.5
250 - maximum 3
After an automatic switch-off, press a any
button to operate the appliance again.
The Automatic switch-off does
not work with the functions:
core temperature sensor,
Light, Duration, End.
8.5 Cooling fan
When the appliance operates, the
cooling fan activates automatically to
keep the surfaces of the appliance cool.
If you deactivate the appliance, the
cooling fan can continue to operate until
the appliance cools down.
8.6 Safety thermostat
Incorrect operation of the appliance or
defective components can cause
dangerous overheating. To prevent this,
the oven has a safety thermostat which
interrupts the power supply. The oven
activates again automatically when the
temperature drops.
9.
HINTS AND TIPS
WARNING!
Refer to Safety chapters.
The temperature and baking
times in the tables are
guidelines only. They depend
on the recipes and the quality
and quantity of the
ingredients used.
9.1 Inner side of the door
In some models, on the inner side of
the door you can find:
the numbers of the shelf positions.
information about the oven functions,
recommended shelf positions and
temperatures for typical dishes.
9.2 General information
The appliance has five shelf positions.
Count the shelf positions from the
bottom of the appliance floor.
The appliance has a special system
which circulates the air and constantly
recycles the steam. With this system
you can cook in a steamy environment
and keep the food soft inside and
crusty outside. It decreases the
cooking time and energy
consumption to a minimum.
Moisture can condense in the
appliance or on the door glass panels.
This is normal. Always stand back
from the appliance when you open
the appliance door while cooking. To
decrease the condensation, operate
ENGLISH 17
the appliance for 10 minutes before
cooking.
Clean the moisture after each use of
the appliance.
Do not put the objects directly on the
appliance floor and do not put
aluminium foil on the components
when you cook. This can change the
baking results and cause damage to
the enamel.
9.3 Baking cakes
Do not open the oven door before
3/4 of the set cooking time is up.
If you use two baking trays at the
same time, keep one empty level
between them.
9.4 Cooking meat and fish
Use a deep pan for very fatty food to
prevent the oven from stains that can
be permanent.
Leave the meat for approximately 15
minutes before carving so that the
juice does not seep out.
To prevent too much smoke in the
oven during roasting, add some water
into the deep pan. To prevent the
smoke condensation, add water each
time after it dries up.
9.5 Cooking times
Cooking times depend on the type of
food, its consistency, and volume.
Initially, monitor the performance when
you cook. Find the best settings (heat
setting, cooking time, etc.) for your
cookware, recipes and quantities when
you use this appliance.
9.6 Baking and roasting table
Cakes
Food Conventional Cooking True Fan Cooking Time (min) Comments
Tempera-
ture (°C)
Shelf posi-
tion
Tempera-
ture (°C)
Shelf posi-
tion
Whisked
recipes
170 2 160 3 (2 and 4) 45 - 60 In a cake
mould
Short-
bread
dough
170 2 160 3 (2 and 4) 20 - 30 In a cake
mould
Buttermilk
cheese-
cake
170 1 165 2 60 - 80 In a 26 cm
cake mould
Apple
cake (Ap-
ple pie)
1)
170 2 160 2 (left and
right)
80 - 100 In two 20
cm cake
moulds on
a wire shelf
Strudel 175 3 150 2 60 - 80 In a baking
tray
Jam-tart 170 2 165 2 (left and
right)
30 - 40 In a 26 cm
cake mould
www.aeg.com18
Food Conventional Cooking True Fan Cooking Time (min) Comments
Tempera-
ture (°C)
Shelf posi-
tion
Tempera-
ture (°C)
Shelf posi-
tion
Sponge
cake
170 2 160 2 50 - 60 In a 26 cm
cake mould
Christmas
cake / Rich
fruit cake
1)
160 2 150 2 90 - 120 In a 20 cm
cake mould
Plum
cake
1)
175 1 160 2 50 - 60 In a bread
tin
Small
cakes -
one level
170 3 140 - 150 3 20 - 30 In a baking
tray
Small
cakes - two
levels
- - 140 - 150 2 and 4 25 - 35 In a baking
tray
Small
cakes -
three lev-
els
- - 140 - 150 1, 3 and 5 30 - 45 In a baking
tray
Biscuits /
pastry
stripes -
one level
140 3 140 - 150 3 30 - 35 In a baking
tray
Biscuits /
pastry
stripes -
two levels
- - 140 - 150 2 and 4 35 - 40 In a baking
tray
Biscuits /
pastry
stripes -
three lev-
els
- - 140 - 150 1, 3 and 5 35 - 45 In a baking
tray
Meringues
- one level
120 3 120 3 80 - 100 In a baking
tray
Merin-
gues- two
levels
1)
- - 120 2 and 4 80 - 100 In a baking
tray
Buns
1)
190 3 190 3 12 - 20 In a baking
tray
ENGLISH 19
Food Conventional Cooking True Fan Cooking Time (min) Comments
Tempera-
ture (°C)
Shelf posi-
tion
Tempera-
ture (°C)
Shelf posi-
tion
Eclairs -
one level
190 3 170 3 25 - 35 In a baking
tray
Eclairs -
two levels
- - 170 2 and 4 35 - 45 In a baking
tray
Plate tarts 180 2 170 2 45 - 70 In a 20 cm
cake mould
Rich fruit
cake
160 1 150 2 110 - 120 In a 24 cm
cake mould
Victoria
sandwich
170 1 160 2 50 - 60 In a 20 cm
cake mould
1)
Preheat for 10 minutes.
Bread and pizza
Food Conventional Cooking True Fan Cooking Time (min) Comments
Tempera-
ture (°C)
Shelf posi-
tion
Tempera-
ture (°C)
Shelf posi-
tion
White
bread
1)
190 1 190 1 60 - 70 1 - 2
pieces, 500
gr per
piece
Rye bread 190 1 180 1 30 - 45 In a bread
tin
Bread
rolls
1)
190 2 180 2 (2 and 4) 25 - 40 6 - 8 rolls in
a baking
tray
Pizza
1)
230 - 250 1 230 - 250 1 10 - 20 In a baking
tray or a
deep pan
Scones
1)
200 3 190 3 10 - 20 In a baking
tray
1)
Preheat for 10 minutes.
Flans
Food Conventional Cooking True Fan Cooking Time (min) Comments
Tempera-
ture (°C)
Shelf posi-
tion
Tempera-
ture (°C)
Shelf posi-
tion
Pasta flan 200 2 180 2 40 - 50 In a mould
www.aeg.com20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

AEG BE5014721M Kasutusjuhend

Kategooria
Pliidid
Tüüp
Kasutusjuhend

teistes keeltes