Model: 203129-W-L
Tools List (Not included)
Screwdriver Silicone
Parts List (Included)
Screw
(12pcs)
Metal Feet
(4pcs)
Foam pad
(4pcs)
Flip the vanity with the back side down on a soft surface. Align and
fasten the 4 metal legs with screws to the pre-drilled holes on the
bottom of the cabinet.
Step 1 Step 2
Put the integrated ceramic sink on the top of vanity, and check if
it stays firm on the vanity.
Step 3 Step 4
If the ceramic sink is not staying firm on the vanity, please use the
foam pad to fill the gap.
Finally, place the ceramic sink again to check the stability.
NOTE: SINK STYLE, SHAPE, FAUCET HOLES, CUTOUT ON TOP, VANITY MAY VARY FROM THE PICTURE ABOVE.
INSTRUCTIONAL PURPOSE ONLY.
Professional installation is recommended.
www.bellaterra-home.com
Bellaterra Home LLC, All Rights Reserved 2015
INSTALLATION
TIPS:
press down the
pin on this side
& press up the
one on another
side to pull out
the drawer box.
Foam pad Foam pad
128mm128mm
-
1
