Orchard Audio Starkrimson Stereo Ultra Kasutusjuhend
- Tüüp
- Kasutusjuhend
How do you like them apples?
Thank you for your support!
Starkrimson® Stereo Ultra Instructions
Danger High Voltage:
The amplifier outputs (speaker terminals) can be up to 80V, do not touch while the amplifier is
on.
Notes:
1. Do not make or break the connections to the amplifier while it is on.
2. Due to the bridged amplifier design both speaker terminals are hot when the amplifier is
on.
• Do not connect any of the speaker terminals to ground / earth ground.
3. The are no user serviceable parts, opening the amplifier will void the warranty.
To turn the amp on:
1. Connect Speakers
2. Connect Input (XLR or RCA)
3. Plug-in power cord into the amplifier
4. Turn it on by pushing the power button on the front, the blue light will illuminate
• It may take upto 30 seconds for both amplifier channels to become active
To turn the amp off:
1. Turn-off by pressing the power button on the front (blue light will turn off), and wait at
least 1 minute for capacitors to discharge before removing connections
-
1
