V TAC V-TAC VT-2437 Wall Panel Remote Kasutusjuhend

Bränd: V TAC

Mudel: V-TAC VT-2437 Wall Panel Remote

Tüüp: Kasutusjuhend

WALL PANEL REMOTE - 4 ZONE

INTRODUCTION & WARRANTY

FUNCTION OF KEYS

PARTS OF DESCRIPTION

CONTROLLER FUNCTIONS

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions

carefully before starting the installation and keep this manual handy for future reference. If you have any

another query, please contact our dealer or local vendor from whom you have purchased the product. They are

trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The

warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company

gives no warranty against damage to any surface due to incorrect removal and installation of the product. The

products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the

warranty. This product is warranted for manufacturing defects only.

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU

FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST

DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

WARNING!

1. Please make sure to turn oﬀ the power before starting the installation.

2. Installation should only be done by a certiﬁed electrician.

3. For Indoor use only

4. Please check the cable, and make the circut is correct before power on.

5. Please do not use lighting ﬁxtures around the mental area and high magnetic ﬁeld, otherwise, it will badly

aﬀect the control distance.

Caution, risk of electric shock.

This marking indicates that this

product should not be disposed

of with other household wastes.

TECHNICAL DATA:

YEARS

WARRANTY

MODEL VT-2437

INPUT VOLTAGE 3V(2*AAA BATTERY)

(Ba�ery not included)

MODULATION METHOD GFSK

TRANSMITTING POWER 6dBm

STANDBY POWER 20μA

OPERATION

TEMPERATURE -10°C to +40°C

CONTROL DISTANCE 30m

DIMENSION 86x86mm

VT-2439

3V(2*AAA BATTERY)

(Ba�ery not included)

GFSK

6dBm

20μA

-10°C to +40°C

30m

86x86mm

BUTTON FUNCTIONS

Remark: When touching the button, LED indicating lamp will ﬂash once with diﬀerent sound

(Touch slider with no sound).

Zone ON

Zone OFF

ALL OFF

4x(un) Link Light

Dimming Slider

60S Delay OFF

ALL ON

CCT Slider

Touch the slider to change color temperature.

Touch dimming slider to change the brightness from 1~100%.

Touch master ON, turn on all linked lights.

Long press 5 seconds to turn ON the indicating sound.

When the light is ON, press “60S Delay OFF”, the light will be OFF.

Automatically after 60 seconds.

Touch master OFF, turn oﬀ all linked lights.

Long press 5 seconds to turn OFF the indicating sound.

Touch Zone ON, turn on zone-linked lights.

Touch Zone OFF, turn oﬀ zone-linked lights.

ALL ON

Mode Speed +

Mode Speed -

Zone ON & 4x(un)

Link Light

Zone OFF

ALL OFF

Dimming Slider

White

Mode

Color Slider

Touch white button to

white light mode.

Switching modes.

Touch dimming slider to change the brightness from

1~100%.

Touch color slider, choose the color you want. Slow the speed on present

dynamic mode.

Accelerate the speed on

present dynamic mode.

ALL ON: Touch to turn on all linked lights.

Long press 5 seconds to turn ON the indicating sound.

Zone(1-4) ON: Touch zone ON, turn on zone-linked lights.

ALL OFF: Touch to turn oﬀ all linked lights.

Long press 5 seconds to turn OFF the indicating sound.

Zone(1-4) OFF: Touch zone OFF, turn oﬀ zone-linked lights.

LINKING INSTRUCTION

UNLINKING INSTRUCTION

Link/Unlink

bu�on

Power

Supply

controller

Power

Supply

controller

LINK

• Switch off the light, after 10 seconds switch on again.

• When the light on, short press any zone of " " 3 times within 3 seconds.

• The light blink 3 times slowly means the linking is done successfully.

• Switch off the light, after 10 seconds switch on again.

• Switch off the light, after 10 seconds switch on again. Unlinking must be the same zone

with the Linking

• The light blinking 10 times quickly, means the unlinking successfully.

UNLINK

INSTALLATION

INSTALLATION DIAGRAM

If the light not blink slowly, the linking failed, please switch off the light again,

and follow the above steps again.

If the light not blink quickly, the unlink failed, pls switch off the light again,

and follow the above steps to unlink again.

Link/Unlink

bu�on

Power

Supply

controller

Power

Supply

controller

1. Tear out the back tape.

2. Stick the holder on the

position where you want.

3. Install 2*AAA battery.

4. Put the rotating switch

on the front of holder.

(VT-2439)

(VT-2437)

MULTI-LANGUAGE

MANUAL QR CODE

Please scan the QR code

to access the manual in

multiple languages.

LINKING/UNLINKING DEVICES

Compatible with the below devices (Not included; available to buy separately)

(SKU: 2912

VT-2432)

(NOT INCLUDED)

(SKU: 2911

VT-2431)

(NOT INCLUDED)

(SKU: 2913

VT-2434)

(NOT INCLUDED)

VT-2432 VT-2434 VT-2431

V TAC V-TAC VT-2437 Wall Panel Remote Kasutusjuhend

Bränd: V TAC

Mudel: V-TAC VT-2437 Wall Panel Remote

Tüüp: Kasutusjuhend

Laadige alla PDF

aruanne

teistes keeltes

English: V TAC V-TAC VT-2437 Wall Panel Remote User manual

V TAC V-TAC VT-2437 Wall Panel Remote Kasutusjuhend

V TAC V-TAC VT-2437 Wall Panel Remote Kasutusjuhend

teistes keeltes

Muud dokumendid