Zanussi ZWO1101 Kasutusjuhend

Kategooria
Pesumasinad
Tüüp
Kasutusjuhend
EN
User manual 2
ET
Kasutusjuhend 20
LV
Lietošanas instrukcija 39
LT
Naudojimo instrukcija 59
Washing Machine
Pesumasin
Veļas mašīna
Skalbyklė
ZWO 1101
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3
Technical information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6
Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8
Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15
Subject to change without notice
Safety information
Before the installation and use, read this manual carefully:
For your safety and the safety of your property
To help the environment
For the correct operation of the appliance.
Always keep these instructions with the appliance also if
you move or give it to a different person.
The manufacturer is not responsible if an incorrect instal-
lation and use causes damage.
Children and vulnerable person safety
Do not let persons, children included, with reduced
physical sensory, reduced mental functions or lack of
experience and knowledge use the appliance. They
must have supervision or instruction for the operation
of the appliance by a person who is responsible for
their safety. Do not let children play with the appliance.
Keep all packaging away from children. There is the
risk of suffocation or injury.
Keep all detergents away from children.
Keep children and pets away from the appliance when
the door is open.
Before you close the appliance door, make sure that
children and pets are not into the drum.
If the appliance has a child safety device, we recom-
mend to activate it.
General safety
Do not use the appliance for professional use. The ap-
pliance is only for domestic use.
Do not change the specifications of this appliance.
There is the risk of injury and damage to the appliance.
Do not put flammable products or items that are wet
with flammable products in, near or on the appliance.
Risk of explosion or fire.
Obey the safety instructions on the detergent packaging
to prevent burns to eyes, mouth and throat.
Make sure that you remove all metal objects from the
laundry. Hard and sharp material can cause damage to
the appliance.
Do not touch the glass of the door while a programme
operates. The glass can be hot (only for front-loading
appliances).
Care and cleaning
Deactivate the appliance and disconnect the mains
plug from the mains socket.
Do not use the appliance without the filters. Make sure
that the installation of the filters is correct. An incorrect
installation causes water leakages.
Installation
The appliance is heavy, be careful when you move it.
Do not transport your appliance without the transit
bolts, you can damage internal components and cause
leakages or malfunctions.
Do not install and connect a damaged appliance.
Make sure to remove all packaging and transport bolts.
Make sure that the mains plug is disconnected from
the mains socket during installation.
Only a qualified person must do the electrical installa-
tion, the plumbing and the installation of the appliance.
This to prevent the risks of structural damage or injury.
Do not install or use the appliance where the tempera-
ture is less than 0 °C.
When you install the appliance on a carpet floor, make
sure that there is air circulation between the appliance
and the carpet. Adjust the feet to have the necessary
space between the appliance and the carpet.
2
Water connection
Do not connect the appliance with old hoses already
used. Only use new hoses.
Make sure not to cause damage to the water hoses.
Do not connect the appliance to new pipes or pipes not
used for a long time. Let the water flow for some mi-
nutes, then connect the inlet hose.
The first time you use the appliance, make sure that the
water hoses and the couplings do not have leakages.
Electrical connection
Make sure that the appliance is earthed.
Make sure that the electrical information on the rating
plate agrees with the power supply.
Always use a correctly installed shockproof socket.
Do not use multiple plugs and extension cables. There
is a risk of fire.
Do not replace or change the mains cable. Contact the
service centre.
Make sure not to cause damage to the mains plug and
cable.
Connect the mains plug to the mains socket only at the
end of the installation. Make sure that there is access
to the mains plug after the installation.
Do not pull the mains cable to disconnect the appli-
ance. Always pull the mains plug.
Discard the appliance
1. Disconnect the mains plug from the mains socket.
2. Cut off the mains cable and discard it.
3. Discard the door catch. This prevents children or
pets to be closed in the appliance. There is a risk of
suffocation (only for front-loading appliances).
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local council, your household waste disposal service
or the shop where you purchased the product.
Packaging materials
Recycle the materials with the symbol .
Put the packaging in applicable containers to recycle it.
Ecological hints
To help the environment, use less water and energy, obey
these instructions:
Set a programme without the prewash phase to wash
laundry with normal soil.
Always start a washing programme with the maximum
load of laundry.
If necessary, use a stain remover when you set a pro-
gramme with a low temperature.
To use the correct quantity of the detergent, check the
water hardness of your domestic system
Technical information
Dimensions Width / Height / Depth 595 / 850 / 330 mm
Electrical connection: Voltage
Overall power
Fuse
Frequency
220-240 V
2100 W
10 A
50 Hz
Level of protection against ingress of solid particles and moisture ensured by
the protective cover, except where the low voltage equipment has no protec-
tion against moisture
IPX4
3
Water supply pressure Minimum 0,5 bar (0,05 MPa)
Maximum 10 bar (1 MPa)
Water supply
1)
Cold water
Maximum load Cotton 3.5 kg
Spin speed Maximum 1000 rpm
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
Product description
1 2 3
4
5
6
7 12
8 9
10
11
1
Worktop
2
Detergent dispenser
3
Control panel
4
Door handle
5
Drain pump
6
Rating plate
7
Feet for the appliance level
8
Water drain hose
9
Mains cable
10
Water inlet valve
11
Transit bolts
12
Feet for the appliance level
Accessories
1 2
34
1
Inlet hose
To connect the appliance to the cold water tap.
2
Large plastic caps
To close the holes on the rear side of the cabinet af-
ter the removal of the transit bolts.
3
Plastic hose guide
To connect the drain hose on the edge of a sink.
4
Small plastic caps
To attach the protection cover to the bottom of the
appliance.
4
Control panel
1
2345
1
Programme knob
2
Start button
3
Easy iron button
4
Extra rinse button
5
Prewash button
Programme knob
1
Turn this knob to set a programme.
Start button
2
Press this button to start a programme.
Easy Iron button
3
Press this button to prevent the creases in the fabrics.
When you press this button, the appliance decrease the
intensity of the washing phase and spin speed.
Automatically, the spin speed is set to 500 rpm.
Set this function to iron the laundry easily and quickly.
Extra rinse button
4
Press this button to add rinsing phases to a programme.
Use this function for persons allergic to detergents and in
areas where the water is soft.
Prewash button
5
Press this button to add a prewash phase at 40° C before
the washing programme.
We recommend that you use this function when you have
laundry with a high level of soil.
The set of this function increases the programme
duration.
5
Programmes
Programme
Temperature
Type of load and soil
Weight of load
Programme
phases
Possible
functions
Cottons
90° C
White cotton with heavy soil. This pro-
grammes add also the phase of hygiene
to the laundry.
max. 3.5 kg
Wash
Rinses
Spin phase at the maxi-
mum speed
+
Cottons Economy
60° C
White and fast coloured cotton with nor-
mal soil.
max. 3.5 kg
Wash
Rinses
Spin phase at the maxi-
mum speed
+
Cottons Economy
40° C
White and coloured cotton with normal
or light soil.
max. 3.5 kg
Wash
Rinses
Spin phase at the maxi-
mum speed
Cottons
30° C
White and coloured cotton with light
soil.
max. 3.5 kg
Wash
Rinses
Spin phase at the maxi-
mum speed
Synthetics
60° C
Synthetic or mixed fabric items with nor-
mal level of soil
max. 1.7 kg
Wash
Rinses
Spin phase at 800 rpm
Sport
40° C
Special programme for sport and casual
items with normal or light level of soil.
Set this programme and the easy iron
function not to iron the laundry.
max. 1.7 kg
Wash
Rinses
Spin phase at 800 rpm
Synthetic mixed
30° C
Cotton, synthetic or mixed fabric items
with light level of soil or worn once.
max. 1.7 kg
Wash
Rinses
Spin phase at 800 rpm
Delicates
Shirts
40° C
Delicate fabrics as acrylics, viscose, pol-
yester items with normal soil.
max. 1.7 kg
Wash
Rinses
Spin phase at 500 rpm
Wool
40° – Cold
Machine washable wool. Hand washable
wool and delicate fabrics with «hand
washing» care symbol.
max. 0.8 kg
Wash
Rinses
Spin phase at 800 rpm
Handwash
30° C
Hand washable delicate fabrics with
«hand washing» care symbol.
max. 0.8 kg
Wash
Rinses
Spin phase at 800 rpm
6
Programme
Temperature
Type of load and soil
Weight of load
Programme
phases
Possible
functions
Quick wash
35° C
Quick wash of cotton, synthetic, delicate
or mixed fabric items with light level of
soil or worn once.
max. 1.7 kg
Wash
Rinses
Spin phase at the maxi-
mum speed
Cold wash
White and coloured cotton with light
soil.
max. 3.5 kg
Wash
Rinses
Spin phase at the maxi-
mum speed
Rinse
All fabrics.
max. 3.5 kg
Rinse with additive
Spin phase at the maxi-
mum speed
Spin
Spin phase for hand washed laundry. Drainage of the water
Spin phase at the maxi-
mum speed
To cancel the programme that it operates or to deactivate the appliance.
Consumption values
Programme Energy consumption
(KWh)
1)
Water consumption
(litre)
1)
Programme duration
(minutes)
1)
White Cottons 90 °C 1.5 43.5 102.5
Cottons 30 °C 0.26 28 87
Synthetics 60 °C 0.7 44 97
Synthetics 40 °C 0.38 38.5 88
Delicates 40 °C 0.4 41.5 47
Wool 40 °C 0.25 44.5 39
Handwash 30 °C 0.17 51 46
1) The consumption information shown in this chart is indicative. It can vary depending on the quantity and the type of laundry, on the
temperature of the water supply and on the ambient temperature.
Standard programmes for the Energy Label consumption
values
The cotton 60 °C economy and cotton 40 °C economy are
the standard cotton programmes for normally soiled cot-
ton laundry. They are suitable to clean normally soiled
cotton laundry and they are the most efficient programmes
in terms of combined energy and water consumption for
washing that type of cotton laundry.
They agree with EN60456.
The actual water temperature may differ from the de-
clared cycle temperature.
7
Hints and tips
The laundry load
Divide the laundry in: white, coloured, synthetics, deli-
cates and wool.
Obey the washing instructions that are on the laundry
care labels.
Do not wash together white and coloured items.
Some coloured items can discolour with the first wash.
We recommend that you wash them separately for the
first times.
Button up pillowcases, close zippers, hooks and pop-
pers. Tie up belts.
Empty the pockets and unfold the items.
Turn inside out multilayered fabrics, wool and items
with painted illustrations.
Remove hard stains.
Wash with a special detergent heavy soil stains.
Be careful with the curtains. Remove the hooks or put
the curtains in a washing bag or pillowcase.
Do not wash in the appliance :
Laundry without hems or with cuts
Underwired bras.
Use a washing bag to wash small items.
A very small load can cause balance problems with the
spin phase. If this occurs, adjust manually the items in
the tub and start the spin phase again.
Stubborn stains
For some stains, water and detergent is not sufficient.
We recommend that you remove these stains before you
put the items in the appliance.
Special stain removers are available. Use the special stain
remover that is applicable to the type of stain and fabric.
Detergents and additives
Only use detergents and additives specially made for
washing machines.
Do not mix different types of detergents.
To help the environment, do not use more than the cor-
rect quantity of detergent.
Obey the instructions that you find on the on packaging
of these products.
Use the correct products for the type and colour of the
fabric, the programme temperature and the level of soil.
If you use liquid detergents, do not set the prewash
phase.
If your appliance has not the detergent dispenser with
the flap device, add the liquid detergents with a dosing
ball.
Water hardness
If the water hardness in your area is high or moderate, we
recommend that you use a water softener for washing ma-
chines. In areas where the water hardness is soft it is not
necessary to use a water softener.
To know the water hardness in your area, contact your lo-
cal water authority.
Obey the instructions that you find on the packaging of the
products.
Equivalent scales measure the water hardness:
German degrees (°dH).
French degrees (°TH).
mmol/l (millimol for each litre - international unit for
the hardness of water).
Clarke degrees.
Water hardness table
Level Type
Water hardness
°dH °T.H. mmol/l Clarke
1 soft 0-7 0-15 0-1.5 0-9
2 medium 8-14 16-25 1.6-2.5 10-16
3 hard 15-21 26-37 2.6-3.7 17-25
4 very hard > 21 > 37 >3.7 >25
8
Before first use
1. To activate the drain system, put 2 litre of water in
the main wash compartment of the detergent dis-
penser.
2. Put a small quantity of detergent in the main wash
compartment of the detergent dispenser. Set and
start a programme for cotton at the highest tempera-
ture without laundry. This removes all possible dirt
from the drum and the tub.
Daily use
1. Open the water tap.
2. Connect the mains plug to the mains socket.
3. Put the laundry in the appliance.
4. Use the correct quantity of detergent and additives.
5. Set and start the correct programme for the type of
laundry and soil.
Loading the laundry
1. Open the appliance door.
2. Put the laundry in the drum, one item at a time.
Shake the items before you put them in the appli-
ance. Make sure not to put too much laundry in
the drum.
3. Close the door.
Caution! Make sure
that no laundry stays
between the seal and the
door. There is a risk of wa-
ter leakage or damage to
the laundry.
Filling the detergent and additives
Caution! Use only specified detergents for washing
machine.
2
1
1
The detergent compartment for the prewash
phase or for the soak programme.
Add the detergent for prewash and soak be-
fore the start of the programme.
2
The detergent compartment for the washing
phase.
If you use a liquid detergent, put it immedi-
ately before you start the programme.
Liquid additives compartment (fabric condi-
tioner, starch).
Put the product in the compartment before
you start the programme.
Always obey the instructions that you find on the
packaging of the detergent products.
9
Using the liquid detergent
A
Pull out the detergent
dispenser until it stops.
Pull out the detergent
divider from its posi-
tion (A).
Put it into the special
guides in the middle of
the compartment for the
washing phase.
Measure out the detergent and the fabric conditioner.
Carefully close the detergent dispenser.
When you use the detergent divider:
Do not use gelatinous or thick liquid detergents.
Do not put more liquid detergent than the edge of the
detergent divider.
Do not set the prewash phase.
Do not set the delay start function, if it is available.
Setting and starting a programme
1. Turn the programme knob and set the washing pro-
gramme.
2. The Start button indicator is off.
3. Set the available functions.
When you press the relevant button, the indicator of
the set function comes on.
4. Press the Start button to start the programme until
the button indicator is on.
Cancel a programme
1.
Turn the programme knob to
to cancel the pro-
gramme and to deactivate the appliance.
2. Turn the programme knob again to activate the ap-
pliance. Now, you can set a new washing pro-
gramme.
The appliance does not drain the water.
Open the door
While a programme operates, the appliance door is
locked.
To open the appliance door:
1.
Turn the programme knob to
to deactivate the
appliance.
2. Wait for some minutes before to open the appliance
door.
3. Close the appliance door.
4. Set the programme again.
If the temperature and level of the water in the drum
are too high, you cannot open the door.
To open the appliance door:
Do the steps 1 and 2 again.
Wait for some minutes.
Make sure that no water is in the drum.
At the end of the programme
The appliance stops automatically.
The start button indicator flashes or the End indicator
is on.
Turn the programme knob to
to deactivate the ap-
pliance.
Remove the laundry from the appliance. Make sure that
the drum is empty.
Keep the door ajar, to prevent mildew and odours.
Close the water tap.
The washing programme is completed, but there is water
in the drum:
The Rinse Hold option or a programme that stops with
water in the drum is set.
The door stays locked and the start button indicator
flashes.
You must drain the water before to open the door.
To drain the water:
1. If the spin speed option is available, you can de-
crease the spin speed.
2. Press the start button. The appliance drain the water
and spin.
3. When the programme is completed:
The start button indicator flashes or the End indi-
cator is on.
You can open the door.
10
4.
Turn the programme knob to
to deactivate the
appliance.
Care and cleaning
Warning!
Disconnect the appliance from the mains supply before
you clean it.
External cleaning
Clean the appliance only with soap and warm water. Fully
dry all the surfaces.
Caution! Do not use alcohol, solvents or chemical
products.
Descaling
The water we use contains limescale. If it becomes neces-
sary, use a water softener to remove limescales.
Use a special product made for washing machines. Obey
the instructions that you find on the packaging of the
manufacturer.
Do this separately from the laundry wash.
Maintenance wash
With the low temperature programmes it is possible that
some detergent stays in the drum. Make regularly a main-
tenance wash. To do this:
Empty the laundry from the drum.
Set the hottest cotton wash programme
Use a correct quantity of powder detergent with biolog-
ical properties.
After each wash, keep the door open for a while to prevent
mould and to let unpleasant smells go out.
Drum
Regularly examine the drum to prevent limescale and rust
particles.
Only use special products to remove rust particles from
the drum.
To do this:
Clean the drum with special product for stainless steel.
Start a short programme for cotton at the maximum
temperature with a small quantity of detergent.
Door seal
Regularly examine the seal
and remove all objects
from the inner part.
Detergent dispenser
To clean the dispenser:
Press the lever and pull
the dispenser out.
Remove the top part of
the liquid additive com-
partment.
Clean all the parts with
water.
Clean the dispenser re-
cess with a brush.
Put back the dispenser in the recess.
11
Drain pump
Regularly examine the drain pump and make sure
that it is clean.
Clean the pump if:
The appliance does not drain the water.
The drum cannot turn.
The appliance makes an unusual noise because of the
blockage of the drain pump.
Warning!
1.
Disconnect the mains plug from the mains socket.
2. Do not remove the filter while the appliance oper-
ates. Do not clean the drain pump if the water in the
appliance is hot. The water must be cold before you
clean the drain pump.
To clean the drain pump:
1. Open the pump door.
2. Put a container be-
low the recess of the
drain pump to collect
the water that flows
out.
3. Unscrew the filter to
let the water flow out.
4. When the container is full of water, screw the filter
again and empty the container. Do steps 3 and 4
again and again until no more water flows out
from the drain pump.
1
2
5. Unscrew the filter
and remove it.
6. Remove fluff and ob-
jects from the pump.
7. Make sure that the
impeller of the pump
can turn. If this does
not occur, contact
the service centre.
1
2
8. Clean the filter under
the water tap and put
it back in the pump.
Caution! Make sure
that you tighten cor-
rectly the filter to prevent
leakages.
9. Close the drain pump door.
Clean the inlet valve filter
It could be necessary to clean the filter when:
The appliance does not fill with water.
The appliance fills with the water for a long time.
Warning! Disconnect the mains plug from the mains
socket.
To clean the filter:
Close the water tap.
Remove the inlet hose behind the appliance.
12
Clean the filter in the valve with a stiff brush or a
towel.
Install again the inlet hose. Make sure that the cou-
plings are tight to prevent leakages.
Open the water tap.
Emergency drain
Because of a malfunction, the appliance cannot drain the
water.
If this occurs, do steps (1) through (5) of 'To clean the
drain pump'.
If necessary, clean the pump.
When you drain the water with the emergency drain proce-
dure, you must activate again the drain system:
1. Put 2 litres of water in the main wash compartment
of the detergent dispenser.
2. Start the programme to drain the water.
Frost precautions
If the appliance is installed in an area where the tempera-
ture can be less than 0 °C, remove the remaining water
from the inlet hose and the drain pump.
1. Disconnect the mains plug from the mains socket.
2. Close the water tap.
3. Remove the water inlet hose
4. Put the two ends of the inlet hose in a container and
let the water flow out of the hose.
5. Empty the drain pump. Refer to the emergency drain
procedure
6. When the drain pump is empty, install the inlet hose
again.
Warning! Make sure that the temperature is more
than 0 °C before you use the appliance again.
The manufacturer is not responsible for damages caused
by low temperatures.
Troubleshooting
The start of the appliance does not occur or it stops dur-
ing operation.
First try to find a solution to the problem (refer to the ta-
ble). If not, contact the service centre.
Warning! Deactivate the appliance before you do the
checks.
Problem Possible cause Possible solution
The appliance does not
start.
The mains plug is not connected in
the mains socket.
Put in the mains plug.
The fuse in the box fuse is damage. Replace the fuse.
The appliance door is open. Close the door firmly.
You do not press the start button Press the start button.
The programme knob is not in the
correct position.
Turn the programme knob in the correct posi-
tion.
The delay start is set.
It is available only for models with
the Delay start.
To start immediately the programme, cancel the
delay start.
The appliance does not fill
with water.
The water tap is closed. Open the water tap.
13
Problem Possible cause Possible solution
The water inlet hose is damaged. Make sure that the water inlet hose has no dam-
ages.
The filter in the water inlet hose is
blocked .
Clean the filter. Refer to 'Care and cleaning'.
The water tap is blocked or there is
limescale on it.
Clean the water tap.
The connection of the water inlet
hose is not correct.
Make sure that the connection is correct.
The water pressure is too low. Contact your local water authority.
The appliance does not
drain the water.
The water drain hose is damaged. Make sure that the water drain hose has no
damages.
The filter of the drain pump is
blocked.
Clean the filter of the drain pump. Refer to 'Care
and cleaning'.
The connection of the water drain
hose is not correct.
Make sure that the connection is correct.
A washing programme without the
drain phase is set.
Set the drain programme.
The function Rinse Hold is on. Set the drain programme.
The spin phase does not
operate.
The spin phase is off. Set the spin programme.
The filter of the drain pump is
blocked.
Clean the filter of the drain pump. Refer to 'Care
and cleaning'.
Balance problems with the laundry
load.
Adjust manually the items in the tub and start
the spin phase again.
There is water on the floor. Leakages from the couplings of the
water hoses.
Make sure that the couplings are tight.
Leakages from the drain pump. Make sure that the drain pump filter is tight.
The water drain hose is damaged. Make sure that the water inlet hose has no dam-
ages.
You cannot open the appli-
ance door.
The washing programme is in oper-
ation.
Let the washing programme end.
There is water in the drum. Set the drain or the spin programme.
The appliance makes an
unusual noise.
Incorrect level of the appliance. Adjust the level of the appliance. Refer to 'Instal-
lation'.
You did not remove the packaging
and/or the transit bolts.
Remove the packaging and/or the transit bolts.
Refer to 'Installation'.
The load is very small. Add more laundry in the drum.
14
Problem Possible cause Possible solution
The appliance fills with wa-
ter and drain immediately.
The end of the drain hose is too low. Make sure that the drain hose is in the correct
position. Refer to 'Installation'.
The washing results are not
satisfactory.
The detergent you used was not suf-
ficient or correct.
Increase the detergent quantity or use a different
one.
You did not remove the stubborn
stains before you wash the laundry.
Use special products to remove the stubborn
stains.
Incorrect temperature was set. Make sure that you set the correct temperature.
Too much laundry load. Decrease the laundry load.
After the check, activate the appliance. The programme continues from the point of interruption.
If the problem occurs again, contact the service centre.
Service
Refer to the information supplied with this appliance for
guarantee condition and point of contact. The information
to give to the service is on the rating plate.
We recommend that you write the
information here:
Model ..................
Product number 914.............
Serial number
(S.N.)
..................
Installation
Unpacking
A
1. Use the gloves. With a cutter remove the external
film.
Do not to discard the plastic cover (A).
15
2. Remove the polystyrene packaging materials.
3. Remove the internal film.
4. Open the door and remove all the items from the
drum.
5. Put the front piece on the floor behind the appli-
ance. Carefully put down the appliance with the
rear side on it. Make sure not to damage the ho-
ses.
16
1
2
6. Remove the polystyrene protection from the bot-
tom.
A
7. Install the plastic cover (A), removed from the top
of the packaging, to the bottom of the appliance.
Remove the adhesive strip and close the bottom of
the appliance. Attach permanently the plastic cov-
er to the bottom of the appliance with the small
plastic caps that you can find in the user manual
bag.
8. Pull up the appliance in vertical position.
2
1
9. Remove the four bolts with a key. Pull out the
plastic spacers. Remove the power supply cable
and the drain hose from the hose holders.
10. Put the plastic caps in the holes. You can find
these caps in the user manual bag.
Warning! Remove all the packaging and the transit
bolts before you install the appliance.
We recommend that you keep the packaging and the
transit bolts for when you move the appliance.
17
Positioning and levelling
Install the appliance on a flat hard floor.
Make sure that carpets do not stop the air circulation
below the appliance.
Make sure that the appliance does not touch the wall
or other units
x4
x4
Loosen or tighten the feet to adjust the level. A cor-
rect adjustment of the appliance level prevents the
vibration, noise and the movement of the appliance
when in operation.
The appliance must be level and stable.
Caution! Do not put cardboard, wood or equivalent
materials below the appliance feet to adjust the
level.
The inlet hose
Connect the hose to the appliance. Loose the ring
nut to set it in the correct position.
Connect the water inlet
hose to the cold water
tap with 3/4 thread.
Caution! Make sure that there are no leaks from the
couplings.
Do not use an extension hose if the inlet hose is too
short. Contact the service centre for the replacement
of the inlet hose.
Water drainage
There are different procedures to connect the drain hose:
With the plastic hose guide
18
On the edge of a sink.
Make sure that the plastic guide cannot move when
the appliance drains. Attach the guide to the water
tap or the wall.
To a stand pipe with vent-hole.
Refer to the illustration. Directly into a drain pipe at a
height of not less than 60 cm and not more than 90
cm. The end of the drain hose must always be venti-
lated , i.e. the inner diameter of the drainpipe must
be larger than the external diameter of the drain
hose.
Without the plastic hose guide
To a sink spigot.
Refer to the illustration. Put the drain hose in the
spigot and tighten it with a clip. Make sure that the
drain hose makes a loop to prevent that remaining
particles go in the appliance from the sink.
Directly to a built-in drain pipe in the room wall and
tighten it with a clip.
19
Sisukord
Ohutusinfo _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 20
Jäätmekäitlus _ _ _ _ _ _ _ _ _ _ _ _ _ _ 21
Tehnilised andmed _ _ _ _ _ _ _ _ _ _ _ _ 22
Seadme kirjeldus _ _ _ _ _ _ _ _ _ _ _ _ _ 22
Juhtpaneel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 23
Programmid _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 24
Vihjeid ja näpunäiteid _ _ _ _ _ _ _ _ _ _ 26
Enne esimest kasutamist _ _ _ _ _ _ _ _ 27
Igapäevane kasutamine _ _ _ _ _ _ _ _ _ 27
Puhastus ja hooldus _ _ _ _ _ _ _ _ _ _ _ 29
Veaotsing _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 32
Paigaldamine _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 34
Jäetakse õigus teha muutusi
Ohutusinfo
Enne paigaldamist ja kasutamist lugege ka-
sutusjuhend hoolega läbi.
Et teaksite, kuidas tagada enda ja oma va-
ra ohutus.
Et aidata keskkonda.
Et teaksite, kuidas seda seadet õigesti ka-
sutada.
Hoidke kasutusjuhend alati seadme lähedu-
ses, et see oleks käepärast ka teise kohta ko-
limisel või siis, kui te seadme kellelegi teisele
annate.
Tootja ei vastuta vale paigaldamise või ebaõi-
ge kasutuse tõttu tekkinud kahjude eest.
Laste ja ohustatud isikute turvalisus
Ärge lubage seadet kasutada lastel ega
füüsilise või sensoorse puudega inimestel;
samuti isikutel, kel puuduvad selleks vajali-
kud kogemused või oskused. Kui nad siiski
seadmega töötavad, peab neid juhendama
või jälgima isik, kes vastutab nende turvali-
suse eest. Ärge lubage lastel seadmega
mängida.
Hoidke pakkematerjalid lastele kättesaa-
matus kohas. Lämbumis- või vigastusoht!
Hoidke pesuained lastele kättesaamatus
kohas.
Hoidke lapsed ja väikesed koduloomad
seadmest eemal, kui selle uks on lahti.
Enne seadme ukse sulgemist veenduge, et
trumlis ei oleks lapsi või koduloomi.
Kui seadmel on lapselukk, soovitame selle
aktiveerida.
Üldine ohutus
Ärge kasutage seadet professionaalses ra-
kenduses. See seade on ette nähtud ainult
koduseks kasutamiseks.
Ärge muutke seadme tehnilisi omadusi.
Sellega kaasneb vigastuste ja seadme
kahjustamise oht.
Ärge pange süttivaid või süttiva ainega
määrdunud esemeid seadmesse, selle lä-
hedusse või peale. Plahvatuse või tulekah-
ju oht!
Järgige pesuaine pakendil antud ohutusju-
hiseid, et ära hoida silmade, suu ja neelu
põletust.
Jälgige, et pesu hulgas ei oleks metallist
esemeid. Kõva ja terav materjal võib sea-
det kahjustada.
Ärge puudutage programmi töötamisel uk-
seklaasi. Klaas võib olla kuum (kehtib vaid
eestlaetavatele seadmetele).
Puhastus ja hooldus
Lülitage seade välja ja ühendage toitepistik
pistikupesast lahti.
Ärge kasutage seadet ilma filtriteta. Veen-
duge, et filtrid on õigesti paigaldatud. Vale
paigaldus põhjustab veelekkeid.
Paigaldamine
Seade on raske, olge seda liigutades ette-
vaatlik.
Ärge transportige seadet ilma transporti-
mispoltideta; võite kahjustada sisekompo-
nente ning põhjustada lekkeid või rikkeid.
20
1 / 1

Zanussi ZWO1101 Kasutusjuhend

Kategooria
Pesumasinad
Tüüp
Kasutusjuhend

teistes keeltes