Microlife BP W1 Basic Kasutusjuhend

Bränd: Microlife

Mudel: BP W1 Basic

Kategooria: Vererõhu ühikud

Tüüp: Kasutusjuhend

Microlife BP W1 Basic

IB BP W1 Basic N-V10 1023

Revision Date: 2023-02-13

Microlife AG

Espenstrasse 139

9443 Widnau / Switzerland

www.microlife.com

Microlife UAB

P. Lukšio g. 32,

08222 Vilnius / Lithuania

106

122

Microlife BP W1 Basic

17 16 13 12

BP W1 BasicGuarantee Card

Name of Purchaser / Inköparens namn / Ostajan nimi / Forhandlers

navn / Kjøpers navn / Pircēja vārds / Pirkėjo pavardė / Ostja nimi /

Ф.И.О. покупателя

Serial Number / Sarjanumero / Serienummer / Serienummer /

Sērijas numurs / Serijos numeris / Seerianumber / Серийный

номер

Date of Purchase / Inköpsdatum / Ostopäivämäärä / Købsdato /

Kjøpsdato / Iegādes datums / Pardavimo data / Ostukuupäev /

Дата покупки

Specialist Dealer / Återförsäljare / Alan kauppias / Special-

forhandler / Spesialist forhandler / Speciālists - pārstāvis /

Pardavusi įstaiga / Ametlik müügiesindaja / Специализированный

дилер

1Microlife BP W1 Basic EN

Display

Microlife BP W1 Basic EN

1ON/OFF button

2Display

3Battery compartment

4Cuff

5M-button (memory)

6Time button

7Systolic value

8Diastolic value

9Pulse rate

AT Date/Time

AK Traffic light indicator

AL Stored value

AM Irregular heartbeat (IHB) symbol

AN Pulse indicator

AO Battery display

AP Arm movement indicator

AQ Cuff check indicator

AR LED positioning indicator

Read the important information in these

instructions for use before using this

device. Follow the instructions for use for

your safety and keep it for future refer-

ence.

Type BF applied part

Manufacturer

Batteries and electronic devices must be

disposed of in accordance with the locally

applicable regulations, not with domestic

waste.

Authorized representative

in the European Community

Intended use:

This oscillometric blood pressure monitor is intended for measuring

non-invasive blood pressure in people aged 12 years or older.

It is simple to use, accurate and comes highly recommended for

blood pressure monitoring in your home.

Dear Customer,

Your new Microlife blood pressure monitor is a reliable medical

device for taking measurements on the wrist. This device was devel-

oped in collaboration with physicians and clinical tests prove its

measurement accuracy to be very high.*

If you have any questions, problems or want to order spare parts

please contact your local Microlife-Customer Service. Your dealer or

pharmacy will be able to give you the address of the Microlife dealer

in your country. Alternatively, visit the internet at www.microlife.com

where you will find a wealth of invaluable information on our products.

Stay healthy – Microlife AG!

* This device is tested according to the ESH protocol.

Reference number

Serial number

(YYYY-MM-DD-SSSSS; year-month-day-

serial number)

Caution

Humidity limitation

Temperature limitation

Medical device

Protected against vertically falling water

drops when enclosure tilted up to 15°.

Keep away from children of age 0 - 3

CE Marking of Conformity

IP22

3Microlife BP W1 Basic EN

Table of contents

1. Important facts about blood pressure

Blood pressure is the pressure of the blood flowing in the arteries

generated by the pumping of the heart. Two values, the systolic

(upper) value and the diastolic (lower) value, are always

measured.

The device indicates the pulse rate (the number of times the heart

beats in a minute).

Permanently high blood pressure values can damage your

health and must be treated by your doctor!

Always discuss your values with your doctor and tell them if you

have noticed anything unusual or feel unsure. Never rely on

single blood pressure readings.

1. Important facts about blood pressure

How do I evaluate my blood pressure

2. Using the device for the first time

Inserting the batteries

Setting the date and time

3. Taking a blood pressure measurement

Checklist for taking a reliable measurement

4. Appearance of the irregular heartbeat (IHB) symbol

5. Traffic light indicator in the display

6. Data memory

Viewing the stored values

Memory full

Clearing all values

How not to store a reading

7. Battery indicator and battery change

Low battery

Flat battery - replacement

Which batteries and which procedure?

Using rechargeable batteries

8. Error messages

9. Safety, care, accuracy test and disposal

Device care

Cleaning the cuff

Accuracy test

Disposal

10. Guarantee

11. Technical specifications

There are several causes of excessively high blood pressure

values. Your doctor will explain them in more detail and offer

treatment where appropriate.

Under no circumstances should you alter the dosages of

drugs or initiate a treatment without consulting your doctor.

Depending on physical exertion and condition, blood pressure is

subject to wide fluctuations as the day progresses. You should

therefore take your measurements in the same quiet condi-

tions and when you feel relaxed! Take at least two readings

every time (in the morning: before taking medications and eating /

in the evening: before going to bed, bathing or taking medication)

and average the measurements.

It is quite normal for two measurements taken in quick succession

to produce significantly different results.

Deviations between measurements taken by your doctor or in the

pharmacy and those taken at home are quite normal, as these

situations are completely different.

Several measurements provide much more reliable information

about your blood pressure than just one single measurement.

Leave a small break of > 5 minutes between two measurements.

If you suffer from an irregular heartbeat (arrhythmia, see Section

«Appearance of the irregular heartbeat (IHB) symbol»), measure-

ments taken with this device should be evaluated with your doctor.

The pulse display is not suitable for checking the frequency

of heart pacemakers!

If you are pregnant, you should monitor your blood pressure

regularly as it can change drastically during this time.

A number of factors can affect the accuracy of measure-

ments taken on the wrist. In some cases, the result may

differ from the measurement taken on the upper arm. We

therefore advise you to compare these values with those

produced by the upper arm measurement and discuss them

with your doctor.

How do I evaluate my blood pressure

Table for classifying home blood pressure values in adults in accor-

dance with the international Guidelines (ESH, ESC, JSH). Data in

mmHg.

Range Systolic Diastolic Recommendation

1. blood pressure

normal < 120 < 74 Self-check

2. blood pressure

normal 120 - 129 74 - 79 Self-check

3. blood pressure

slightly high 130 - 134 80 - 84 Consult your doctor

5Microlife BP W1 Basic EN

The higher value is the one that determines the evaluation. Example:

a blood pressure value of 140/80 mmHg or a value of 130/90 mmHg

indicates «blood pressure too high».

2. Using the device for the first time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The

battery compartment 3 is at the top of the device. Insert the

batteries (2 x 1.5 V, size AAA), thereby observing the indicated

polarity.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 5. To

confirm and then set the month, press the time button 6.

2. Press the M-button to set the month. Press the time button to

confirm and then set the day.

3. Follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the time

button for approx. 3 seconds until the year number starts to flash.

Now you can enter the new values as described above.

3. Taking a blood pressure measurement

Checklist for taking a reliable measurement

1. Avoid activity, eating or smoking immediately before the measure-

ment.

2. Sit down on a back-supported chair and relax for 5 minutes. Keep

your feet flat on the floor and do not cross your legs.

3. Always measure in a sitting position and on the same wrist. Use

the wrist which usually shows higher blood pressure values.

4. Remove any items of clothing and your watch, for example, so

that your wrist is free.

5. Always ensure that the cuff is positioned correctly, as shown in the

pictures illustrated on the short instruction card.

6. Fit the cuff comfortably but not too tight. The cuff will cover a wrist

circumference according to the information in the «Technical

specifications».

7. Press the ON/OFF button 1 to start the measurement.

4. blood pressure

too high 135 - 159 85 - 99 Seek medical

advice

5. blood pressure

far too high ≥ 160 ≥ 100 Seek medical

advice

Range Systolic Diastolic Recommendation

8. The LED Positioning Indicator AR is activated. Support your arm

in a relaxed position with the device at the same height as your

heart, move your arm until the LED light is at its brightest and

appears to be in the center of the indicator.

9. After 5-8 seconds, the cuff will pump up automatically. Relax, do

not move and do not tense your arm muscles until the measure-

ment result is displayed. Breathe normally and do not talk.

10.The measurement is performed during the inflation. The inflation

speed may vary, this is a normal occurence.

11.During the measurement, the pulse indicator AN flashes in the

display.

12.The result, comprising the systolic 7 and the diastolic 8 blood

pressure and the pulse rate 9 are displayed. Note also the expla-

nations on further display symbols in this booklet.

13.Remove and switch off the monitor and enter the result in the

enclosed blood pressure pass. (The monitor does switch off auto-

matically after approx. 1 min.).

You can stop the measurement at any time by pressing the

ON/OFF button or open the cuff (e.g. if you feel uneasy or an

unpleasant pressure sensation).

4. Appearance of the irregular heartbeat (IHB) symbol

This symbol AM indicates that an irregular heartbeat was detected. In

this case, the measured blood pressure may deviate from your actual

blood pressure values. It is recommended to repeat the measure-

ment.

5. Traffic light indicator in the display

The bars on the left-hand edge of the display AK show you the range

within which the indicated blood pressure value lies. Depending on

the height of the bar, the readout value is either within the optimum

(green), elevated (yellow), too high (orange) or dangerously high

(red) range. The classification corresponds to the 4 ranges in the

table as defined by the international guidelines (ESH, ESC, JSH), as

described in «Section 1.».

Information for the doctor in case of repeated appearance of

the IHB symbol:

This device is an oscillometric blood pressure monitor that also

measures the pulse during blood pressure measurement and indi-

cates when the heart rate is irregular.

7Microlife BP W1 Basic EN

6. Data memory

At the end of each measurement, this device automatically stores the

result, including date and time.

Viewing the stored values

Press the M-button 5 briefly, when the device is switched off. The

display first shows «M» AL and then a value, e.g. «M 17». This

means that there are 17 values in the memory. The device then

switches to the last stored result.

Pressing the M-button again displays the previous value. Pressing

the M-button repeatedly enables you to move from one stored value

to another.

Memory full

Pay attention that the maximum memory capacity of 30

memories per user is not exceeded. When the 30 memory is

full, the oldest value is automatically overwritten with the

31th value. Values should be evaluated by a doctor befor the

memory capacity is reached – otherwise data will be lost.

Clearing all values

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the device must have been switched

off beforehand) until «CL» appears and then release the button. To

permanently clear the memory, press the M-button while «CL» is

flashing. Individual values cannot be cleared.

How not to store a reading

As soon as the reading is displayed press and hold the ON/OFF

button 1 until «M» AL is flashing. Confirm to delete the reading by

pressing the M-button 5.

7. Battery indicator and battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol AO

will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably, you

should obtain replacement batteries.

Flat battery - replacement

When the batteries are flat, the battery symbol AO will flash as soon

as the device is switched on (flat battery displayed). You cannot take

any further measurements and must replace the batteries.

1. Open the battery compartment 3 by pulling off the cap.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

3. To set date and time, follow the procedure described in Section

«2. Using the device for the first time».

The memory retains all values although date and time must be

reset – the year number therefore flashes automatically after

the batteries are replaced.

Which batteries and which procedure?

Use 2 new, long-life 1.5 V, size AAA alkaline batteries.

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not intend

to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

8. Error messages

Error Description Potential cause and remedy

«ERR 1» Signal too

weak The pulse signals on the cuff are too

weak. Re-position the cuff and repeat the

measurement.*

«ERR 2»

Error signal During the measurement, error signals

were detected by the cuff, caused for

instance by movement or muscle tension.

Repeat the measurement, keeping your

arm still.

«ERR 3»

No pressure

in the cuff An adequate pressure cannot be gener-

ated in the cuff. A leak may have occurred.

Check that the cuff is correctly connected

and is not too loose. Replace the batteries

if necessary. Repeat the measurement.

«ERR 5» Abnormal

result The measuring signals are inaccurate and

no result can therefore be displayed.

Read through the checklist for taking a

reliable measurement and then repeat the

measurement.*

9Microlife BP W1 Basic EN

9. Safety, care, accuracy test and disposal

mSafety and protection

Follow instructions for use. This document provides important

product operation and safety information regarding this device.

Please read this document thoroughly before using the device and

keep for future reference.

This device may only be used for the purposes described in these

instructions. The manufacturer cannot be held liable for damage

caused by incorrect application.

This device comprises sensitive components and must be treated

with caution. Observe the storage and operating conditions

described in the «Technical specifications» section.

The cuffs are sensitive and must be handled with care.

Only pump up the cuff once fitted.

Do not use this device if you think it is damaged or notice anything

unusual.

Never open this device.

Read the additional safety information provided within the indi-

vidual sections of this instruction manual.

The measurement results given by this device is not a diagnosis.

It is not replacing the need for the consultation of a physician,

especially if not matching the patient’s symptoms. Do not rely on

the measurement result only, always consider other potentially

occurring symptoms and the patient’s feedback. Calling a doctor

or an ambulance is advised if needed.

Ensure that children do not use this device unsupervised;

some parts are small enough to be swallowed. Be aware of

the risk of strangulation in case this device is supplied with

cables or tubes.

mContra-indications

Do not use this device if the patient’s condition meets the following

contra-indications, to avoid inaccurate measurements or injuries.

The device is not intended for measuring blood pressure in pedi-

atric patients of age younger than 12 years old (children, infant, or

neonates).

«HI» Pulse or cuff

pressure too

high

The pressure in the cuff is too high (over

299 mmHg) OR the pulse is too high (over

200 beats per minute). Relax for 5 minutes

and repeat the measurement.*

«LO» Pulse too

low The pulse is too low (less than 40 beats

per minute). Repeat the measurement.*

Error Description Potential cause and remedy

Presence of significant cardiac arrhythmia during measurement

may interfere with blood pressure measurement and affect the

reliability of blood pressure readings. Consult with your doctor

about whether the device is suitable for use in this case.

The device measures blood pressure using a pressured cuff. If the

measuring limb suffers from injuries (for example open wounds) or

under conditions or treatments (for example intravenous drip)

making it unsuitable for surface contact or pressurization, do not

use the device, to avoid worsening of the injuries or conditions.

Patient motions during measurement may interfere with the

measurement process and influence results.

Avoid taking measurements of patients with conditions, diseases,

and susceptible to environment conditions that lead to incontrol-

lable motions (e.g. trembling or shivering) and inability to commu-

nicate clearly (for example children and unconscious patients).

The device uses oscillometric method to determine blood pres-

sure. The arm being measure should have normal perfusion. The

device is not intended to be used on a limb with restricted or

impaired blood circulation. If you suffer with perfusion or blood

disorders, consult your doctor before using the device.

Avoid taking measurement on the arm on the side of a mastec-

tomy or lymph node clearance.

Do not use this device in a moving vehicle (for example in a car or

on an aircraft).

mWARNING

Indicates a potentially hazardous situation, which if not avoided,

could result in death or serious injury.

This device may only be used for the intended uses described in

this Instructions for Use. The manufacturer cannot be held liable

for damage caused by incorrect application.

Do not change the patient medication and treatment based the

result of one or multiple measurements. Treatment and medica-

tion changes should be prescribed only by a medical professional.

Inspect the device, cuff, and other parts for damage. DO NOT

USE the device, cuff or parts if they appear damaged or operating

abnormally.

Blood flow of the arm is temporarily interrupted during measure-

ment. Extended interruption of blood flow reduces peripheral

circulation and may cause tissue injury. Beware of signs (for

example tissue discoloration) of impeded peripheral circulation if

taking measurements continuously or for an extended period of

time.

Prolonged exposure to cuff pressure will reduce peripheral perfu-

sion and may lead to injury. Avoid situations of extended cuff pres-

surization beyond normal measurements. In the case of abnor-

mally long pressurization, abort the measurement or loose the cuff

to depressurize the cuff.

11Microlife BP W1 Basic EN

Do not use this device in oxygen rich environment or near flam-

mable gas.

The device is not water resistant or water proof. Do not spill or

immerse the device in water or other liquids.

Do not dissemble or attempt to service the device, accessory and

parts, during use or in storage. Access to the device internal hard-

ware and software is prohibited. Unauthorized access and

servicing of the device, during use or in storage, may compromise

the safety and performance of the device.

Keep the device away from children and people incapable of oper-

ating the device. Beware of the risks of accidental ingestion of

small parts and of strangulation with the cables and tubes of this

device and accessories.

mCAUTION

Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury to the user or patient, or cause

damage to the device or other property.

The device is intended only for measuring blood pressure at wrist.

Do not measure other sites because the reading does not reflect

your blood pressure accurately.

After a measurement is completed, loosen the cuff and rest for >

5 minutes to restore limb perfusion, before taking another

measurement.

Do not use this device with other medical electrical (ME) equip-

ment simultaneously. This may cause device malfunction or

measurement inaccuracies.

Do not use this device in proximity of high frequency (HF) surgical

equipment, magnetic resonance imaging (MRI) equipment, and

computerized tomography (CT) scanners. This may cause device

malfunction and measurement inaccuracies.

Use and store the device, cuff and parts in temperature and

humidity conditions specified in the «Technical specifications».

Usage and storage of the device, cuff and parts in conditions

outside ranges given in the «Technical specifications» may results

in device malfunction and the safety of usage.

Protect the device and accessories from the following to avoid

damaging the device:

- water, other liquids, and moisture

- extreme temperatures

- impacts and vibrations

- direct sunlight

- contamination and dust

Stop using this device and cuff and consult with your doctor if you

experience skin irritation or discomfort.

Electromagnetic Compatibility Information

This device is compliant with EN60601-1-2: 2015 Electromagnetic

Disturbances standard.

This device is not certified to be used in vicinity of High Frequency

(HF) medical equipment.

Do not use this device close to strong electromagnetic fields and

portable radio frequency communication devices (for example micro-

wave oven and mobile devices). Keep a minimum distance of 0.3 m

from such devices when using this device.

Device care

Clean the device only with a soft, dry cloth.

Cleaning the cuff

Carefully remove any marks on the cuff with a damp cloth and mild

detergent.

Accuracy test

We recommend this device is tested for accuracy every 2 years or

after mechanical impact (e.g. being dropped). Please contact your

local Microlife-Service to arrange the test (see foreword).

Disposal

Batteries and electronic devices must be disposed of in accor-

dance with the locally applicable regulations, not with

domestic waste.

10.Guarantee

This device is covered by a 5 year guarantee from the date of

purchase. During this guarantee period, at our discretion, Microlife

will repair or replace the defective product free of charge.

Opening or altering the device invalidates the guarantee.

The following items are excluded from the guarantee:

Transport costs and risks of transport.

Damage caused by incorrect application or non-compliance with

the instructions for use.

Damage caused by leaking batteries.

Damage caused by accident or misuse.

Packaging/storage material and instructions for use.

Regular checks and maintenance (calibration).

Accessories and wearing parts: Batteries.

The cuff is covered by a functional guarantee (bladder tightness) for

2 years.

Should guarantee service be required, please contact the dealer

from where the product was purchased, or your local Microlife

service. You may contact your local Microlife service through our

website:

www.microlife.com/support

13Microlife BP W1 Basic EN

Compensation is limited to the value of the product. The guarantee

will be granted if the complete product is returned with the original

invoice. Repair or replacement within guarantee does not prolong or

renew the guarantee period. The legal claims and rights of

consumers are not limited by this guarantee.

11.Technical specifications

This device complies with the requirements of the Medical Device

Directive 93/42/EEC.

Technical alterations reserved.

Operating condi-

tions: 10 - 40 °C / 50 - 104 °F

15-90 % relative maximum humidity

Storage conditions: -20 - +55 °C / -4 - +131 °F

15-90 % relative maximum humidity

Weight: 127 g (including batteries)

Dimensions: 131 x 90 x 60.5 mm

Cuff size: 13.5 - 21.5 cm (5.25 - 8.5 inches)

Measuring proce-

dure: oscillometric, corresponding to Korotkoff

method: Phase I systolic, Phase V

diastolic

Measurement range: 20 - 280 mmHg – blood pressure

40 - 200 beats per minute – pulse

Cuff pressure display

range: 0 - 299 mmHg

Resolution: 1 mmHg

Static accuracy: within ± 3 mmHg

Pulse accuracy: ± 5 % of the readout value

Voltage source: 2 x 1.5 V alkaline batteries; size AAA

Battery lifetime: approx. 320 measurements

(using new batteries)

IP Class: IP 20

Reference to

standards: EN 1060-1 /-3 /-4; IEC 60601-1;

IEC 60601-1-2 (EMC); IEC 60601-1-11

Expected service life: Device: 5 years or 10000 measurements,

whichever comes first

Accessories: 2 years or 5000 measure-

ments, whichever comes first

Display

Microlife BP W1 Basic SV

1PÅ/AV-knapp

2Bildskärm (display)

3Batterifack

4Manschett

5M-knapp (minne)

6Tidsknapp

7Systoliskt värde

8Diastoliskt värde

9Pulsslag

AT Datum/Tid

AK Trafikljusindikator

AL Sparat värde

AM Oregelbundna hjärtslag (IHB) symbol

AN Puls indikator

AO Batteridisplay

AP Indikering av armrörelse under mätning

AQ Kontroll indikator för manschett

AR LED läges indikator

Läs den viktiga informationen som finns i

denna bruksanvisning innan du använder

denna enhet. Följ bruksanvisningen för din

säkerhet och spara den för framtida

referens.

Tillämplighetsklass BF

Tillverkare

Batterier och elektroniska instrument skall

avfallshanteras enligt gällande miljölag-

stiftning. Släng inte i hushållssoporna.

Auktoriserade representanter i Europiska

länder

15Microlife BP W1 Basic SV

Avsedd användning:

Denna oscillometriska blodtrycksmätaren är avsedd för icke-invasiv

mätning av blodtrycket hos patienter, 12 år och äldre.

Instrumentet är enkelt att använda, noggrannt och rekommenderas

för blodtrycksmätning hemma.

Bäste kund

Din nya Microlife blodtrycksmätare är ett säkert medicinskt instru-

ment för mätningar på handleden. Instrumentet är utvecklat i samar-

bete med läkare och kliniska tester bevisar att dess mätnoggrannhet

är mycket hög.*

Om du har frågor, problem eller vill beställa reservdelar ber vi dig

kontakta Microlifes lokala kundservice. Din återförsäljare eller ditt

apotek kan ge dig kontaktuppgifter till en Microlife-representant i ditt

land. Alternativt kan du besöka adressen www.microlife.com där du

finner värdefull information om våra produkter.

Med önskan om ett hälsosamt liv – Microlife AG!

* Denna utrustning är testad enligt ESH protokoll.

Referens nummer

Serienummer (ÅÅÅÅ-MM-DD-SSSSS;

år-månad-dag-serienummer)

Försiktighet

Fuktgräns

Temperaturgräns

Medicinsk utrustning

Skyddad mot vertikalt fallande vatten-

droppar när höljet lutar upp till 15°

Förvaras oåtkomligt från barn i åldern 0 - 3

år

Märkning för överensstämmelse (konfor-

mitet)

IP22

Innehållsförteckning

1. Viktiga fakta om blodtryck

Blodtryck är trycket med vilket blodet passerar genom artärerna

när hjärtat pumpar. Två värden, det systoliska (övre) värdet och

det diastoliska (lägre) värdet mäts alltid.

Instrumentet visar även pulsslag (antalet hjärtslag per minut).

Ständigt höga blodtrycksvärden kan skada din hälsa och

måste behandlas av läkare.

1. Viktiga fakta om blodtryck

Hur bedömer jag mitt blodtryck?

2. Användning av instrumentet första gången

Lägga i batterier

Inställning av tid och datum

3. Gör en blodtrycksmätning

Checklista för säker mätning

4. Utseende på oregelbundna hjärtslag (IHB) symbol

5. Trafikljusindikering i displayen

6. Dataminne

Hämta sparade värden

Minnet fullt

Radering av alla värden

Att inte lagra ett mätvärde

7. Indikation på att batteriet håller på att ta slut och

batteribyte

Då batteriet nästan är slut

Tomma batterier – utbyte

Vilka batterier och hur skall de bytas ut?

Användning av laddningsbara batterier

8. Felmeddelanden

9. Säkerhet, underhåll, noggrannhetstest och avfall-

shantering

Instrumentunderhåll

Rengöring av manschett

Nogrannhetstest

Avfallshantering

10. Garanti

11. Tekniska data

17Microlife BP W1 Basic SV

Diskutera alltid dina värden med din läkare och tala om för honom/

henne om du upptäcker något onormalt eller känner dig osäker.

Lita aldrig på enstaka blodtrycksmätningar.

Det finns flera orsaker till för höga blodtrycksvärden. Din läkare

kommer att förklara dem mer ingående och erbjuda behandling

där så är lämpligt.

Under inga omständigheter skall Du ändra doseringen av

Dina mediciner eller påbörja behandling utan att konsultera

Din läkare.

Beroende på fysisk ansträngning och kondition är blodtrycket

föremål för stora fluktuationer under dagens lopp. Du bör därför

alltid genomföra dina mätningar under samma lugna förhål-

landen och när du känner dig avslappnad! Ta minst två

avläsningar varje gång (på morgonen: innan du tar mediciner och

äter / på kvällen: innan du går till sängs, badar eller tar mediciner)

och räkna ut genomsnittet.

Det är normalt att två mätningar som görs direkt efter varandra

kan ge olika resultat.

Det är normalt att det förekommer skillnader mellan mätningar

som utförts av din läkare eller på apoteket och dem du tar hemma,

eftersom mätningssituationen är annorlunda.

Flera mätningar ger säkrare information om Ditt blodtryck än

enstaka mätningar.

Vänta en stund > 5 minuter mellan två mätningar.

Om du lider av oregelbunden hjärtrytm (arytmier, se avsnitt

«Utseende på oregelbundna hjärtslag (IHB) symbol»), mätningar

gjorda med detta instrument skall utvärderas av Din läkare.

Pulsindikeringen är inte lämplig för att kontrollera frekvensen

hos en pacemaker.

Om Du är gravid skall Du mäta Ditt blodtryck regelbundet Då det

kan variera mycket under denna tid.

Ett antal faktorer kan påverka mätnoggrannheten vid

mätningar på handleden. I vissa fall, kan resultatet variera

från mätningar på överarmen. Vi rekommenderar därför att du

jämför de olika värdena från mätningar på handled och

överarm och diskuterar dem med din läkare.

Hur bedömer jag mitt blodtryck?

Tabellen nedan visar en klassificering av blodtrycksvärden enligt

internationella rekommendationer (ESH, ESC, JSH). Data i mmHg.

Intervall Systoliskt Diastoliskt Rekommendation

1. Normalt

blodtryck < 120 < 74 Självkontroll

2. Normalt

blodtryck 120 - 129 74 - 79 Självkontroll

Det högre värdet bestämmer bedömningen. T.ex.: ett blodtryck på

140/80 mmHg eller ett värde på 130/90 mmHg anger «för högt blod-

tryck».

2. Användning av instrumentet första gången

Lägga i batterier

Packa upp instrumentet och lägg i batterierna. Batterifacket 3 finns

på toppen av instrumentet. Lägg i batterierna (2 x 1.5 V, storlek AAA),

se till att polerna placeras korrekt.

Inställning av tid och datum

1. Årssiffran blinkar i displayen när nya batterier är inlagda. Du kan

ställa in år genom att trycka på M-knappen 5. Tryck på

tidsknappen 6 för att bekräfta och sedan ställa in månad.

2. Du kan ställa in rätt månad genom att trycka på M-knappen. Tryck

in tidsknappen för att bekräfta och sedan ställa in rätt datum.

3. Följ ovanstående instruktioner för att ställa in dag, timme och

minuter.

4. När du har ställt in minuterna, tryck in tidsknappen och håll den

intryckt, datum och tid sparas och tiden visas.

5. Om du vill ändra på datum och tid, tryck in tidsknappen och håll

den intryckt i ca. 3 sekunder till årssiffran börjar blinka. Du kan nu

ange nya värden enligt instruktionerna ovan.

3. Gör en blodtrycksmätning

Checklista för säker mätning

1. Undvik fysisk aktivitet, måltid eller rökning direkt före mätning.

2. Sitt ner på en stol med ryggstöd och slappna av i 5 minuter. Håll

fötterna platt på golvet och korsa ej benen.

3. Mät alltid på samma handled och sitt ner under mätningen.

Använd den handled som visar högst blodtrycksvärden flest

gånger.

4. Ta av klädesplagg på handleden och din armbandsklocka så att

handleden är helt fri.

5. Kontrollera alltid att manschetten sitter rätt, så som visas på

bilderna på instruktionskortet.

6. Sätt manschetten bekvämt men inte för hårt. Manschetten

kommer att täcka den handledsomkrets som anges i de

«Tekniska data».

3. Något för högt

blodtryck 130 - 134 80 - 84 Konsultera din

läkare

4. För högt

blodtryck 135 - 159 85 - 99 Sök medicinsk

rådgivning

5. Alldeles för

högt blodtryck ≥ 160 ≥ 100 Sök medicinsk

rådgivning

Intervall Systoliskt Diastoliskt Rekommendation

Leht laadib ...

Microlife BP W1 Basic Kasutusjuhend

Bränd: Microlife

Mudel: BP W1 Basic

Kategooria: Vererõhu ühikud

Tüüp: Kasutusjuhend

Laadige alla PDF

aruanne

teistes keeltes

svenska: Microlife BP W1 Basic Användarmanual
dansk: Microlife BP W1 Basic Brugermanual