Removing the Microphone Handle
GLXD2
on
GLXD2
on
GLXD2
on
GLXD2
on
1. Unscrew and remove the battery cover.
2. Unscrew the grille and carefully remove it so that it does not scrape
against the microphone assembly underneath.
3. Remove the lock ring using the same procedure as removing the grille.
4. Slide the cover off the microphone.
Installing the Custom Handle
GLXD2
on
GLXD2
on
GLXD2
on
GLXD2
on
1. Slide the new cover onto the top end of the microphone.
2. Carefully slide the lock ring over the microphone assembly and tighten
clockwise.
3. Gently guide the grille over the microphone assembly and tighten clock-
wise.
4. Install the new battery cover on the microphone and rotate clockwise to
tighten.
Warning: Please immediately cease using this custom microphone handle
if it becomes cracked, chipped, or otherwise physically damaged.
1/1©2017 Shure Incorporated
GLXD Custom Handle Installation
GLX-D Custom Handle Installation
-
1
