Samsung PS42B450B1W Kasutusjuhend

Kategooria
Plasmatelerid
Tüüp
Kasutusjuhend
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
BN68-02354E-01
Plasma TV
user manual
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
AUSTRIA 0810 - SAMSUNG(7267864, € 0.07/min) www.samsung.com/at
BELGIUM 02 201 2418
www.samsung.com/be (Dutch)
www.samsung.com/be_fr (French)
CZECH REPUBLIC
800 - SAMSUNG (800-726786) www.samsung.com/cz
Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
DENMARK 8 - SAMSUNG(7267864) www.samsung.com/dk
EIRE 0818 717 100 www.samsung.com/ie
ESTONIA 800-7267 www.samsung.com/ee
FINLAND
30 - 6227 515
www.samsung.com/fi
FRANCE 01 4863 0000 www.samsung.com/fr
GERMANY 01805 - SAMSUNG(726-7864 € 0,14/Min) www.samsung.de
HUNGARY 06-80-SAMSUNG(726-7864) www.samsung.com/hu
ITALIA 800-SAMSUNG(726-7864) www.samsung.com/it
KAZAKHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru
KYRGYZSTAN 00-800-500-55-500
LATVIA 8000-7267 www.samsung.com/lv
LITHUANIA 8-800-77777 www.samsung.com/lt
LUXEMBURG 02 261 03 710 www.samsung.com/lu
NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl
NORWAY 3 - SAMSUNG(7267864) www.samsung.com/no
POLAND
0 801 1SAMSUNG(172678)
022-607-93-33
www.samsung.com/pl
PORTUGAL 80820-SAMSUNG(726-7864) www.samsung.com/pt
RUSSIA 8-800-555-55-55 www.samsung.ru
SLOVAKIA 0800-SAMSUNG(726-7864) www.samsung.com/sk
SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es
SWEDEN 075 - SAMSUNG(726 78 64) www.samsung.com/se
Switzerland 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch
TADJIKISTAN 8-10-800-500-55-500
Turkey 444 77 11 www.samsung.com/tr
U.K 0845 SAMSUNG (7267864) www.samsung.com/uk
UKRAINE 8-800-502-0000 www.samsung.ua
UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru
BN68-02354EGH-Eng.indb 1 2009-06-30 �� 10:08:02
English - 2
User Instructions
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more
than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image
retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not
install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper
part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be
prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as
temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to
produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of
the product.
Avoid operating the TV at temperatures below 5°C(41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,
right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a
game console may cause similar effect to the screen. Damages caused by the above effect are not covered by
the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Warranty
Warranty does not cover any damage caused by image retention. -
Burn-in is not covered by the warranty. -
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures,
high humidity, chemical substance and where it operates continually such as the airport, the train station etc. Failure to do so may
cause a serious damage to your set.
Digital TV Notice
1. Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC)
digital terrestrial signals are broadcasted or where you have access to a compatible DVB-C(MPEG2 and MPEG4 AAC)
cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.
2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C
is that for the broadcast transmission of digital TV over cable.
However, some differentiated features like EPG (Electric Program Guide), VOD (Video on Demand) and so on, are not
included in this specication. So, they cannot be supported at this moment.
3. Although this TV set meets the latest DVB-T and DVB-C standards[August,2008], the compatibility with future DVB-T digital
terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.
4. Some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and
conditions of their business.
5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with all
providers.
6. For more information, please contact your local Samsung customer care centre.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre. (See back cover for more informations.)
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
BN68-02354EGH-Eng.indb 2 2009-06-30 �� 10:08:02
English
N O T
Symbol Press Note One-Touch Button TOOLS
English - 3
Contents
Connecting and Preparing Your TV
Checking Parts ..........................................................................4
Using the Stand-Base ...............................................................4
How to assemble the Stand-Base (depending on the model) ...4
Viewing the Control Panel .........................................................5
Viewing the Connection Panel ...................................................6
Remote Control .........................................................................8
Installing Batteries in the Remote Control .................................9
Switching On and Off .................................................................9
Placing Your Television in Standby Mode ..................................9
Viewing the Menus ..................................................................10
Using the TOOLS Button .........................................................10
Viewing the Display .................................................................10
Plug & Play Feature ................................................................ 11
Channel Control
Storing Channels ................................................................... 12
Managing Channels ................................................................15
Picture Control
Changing the Picture Settings .................................................17
Using the 3D Function ............................................................. 20
Setting up the TV with your PC ............................................... 21
PC Display ...............................................................................22
Sound Control
Changing the Sound Setting ...................................................23
Selecting the Sound Mode ......................................................24
Function Description
Conguring the Setup Menu ....................................................25
Setting the Time ......................................................................27
Source List / Edit Name ...........................................................28
Supported Program .................................................................28
About Anynet+
Connecting Anynet + Devices ..................................................29
Setting Up Anynet+ ................................................................. 30
Scanning and Switching between Anynet
+
Devices................30
Recording ................................................................................31
Listening through a Receiver (Home theater) .........................32
Troubleshooting for Anynet
+
..................................................32
Recommendations for Use
Teletext Feature .......................................................................33
Wall Mount Kit Specications (VESA) ..................................... 34
Preparing before installing Wall- Mount on the wall ................35
Securing the TV to the Wall .....................................................35
Troubleshooting .......................................................................36
Securing the Installation Space ...............................................36
Specications ..........................................................................37
BN68-02354EGH-Eng.indb 3 2009-06-30 �� 10:08:02
English - 4
Using the Stand-Base
Two or more people should carry the PDP. Never lay the PDP on the oor N
because of possible damage to the screen. Always keep the PDP upright.
The PDP can rotate 20 degrees in right and left directions.
N
How to assemble the Stand-Base (depending on the model)
Using the 4 screws for securing the stand base and the monitor, firmly attach the
monitor to the stand base.
(The exterior of the set may be different than the picture.)
In case of installing your TV on the wall, close the
cover (1) on the stand-base connection part using
two screws for hiding.
Warning
Firmly secure the stand to the TV before moving
it, as the stand may fall and could cause serious
injury.
Two or more people should carry the TV.
N
Never lay the TV on the oor because of
possible damage to the screen.
Always store the TV upright.
-20° ~ 20°
Checking Parts
Owners Instructions Remote Control/
AAA Batteries (2ea)
Power Cord Cloth-Clean Warranty Card/
Safety Guide Manual
(Not available in all locations)
Screw (4ea) Cover-Bottom Holder-Ring (4ea)
(Refer to page 35)
Ferrite Core for Power
Cord (1ea)
The ferrite core is used to shield the cable from interference. When connecting a cable, open the ferrite N
core and clip it around the cable near the plug.
Connecting and Preparing Your TV
BN68-02354EGH-Eng.indb 4 2009-06-30 �� 10:08:05
English - 5
Viewing the Control Panel
The product colour and shape may vary depending on the model. N
Front Panel buttons
Touch each button to
operate.
1
SOURCE
Toggles between all the available input sources
(TV, Ext. AV, PC, Component, HDMI1, HDMI2/DVI, HDMI3).
In the on-screen menu, use this button as you would use
N
the ENTERE button on the remote control.
2
MENU
Press to see an on-screen menu of your TV’s features.
3
+
Press to increase or decrease the volume. In the on-screen
menu, use the + – buttons as you would use the
◄ and ► buttons on the remote control.
4
CH
Press to change channels. In the on-screen menu, use the
CH buttons as you would use the ▲ and ▼ buttons
on the remote control.
5
POWER INDICATOR
Lights up when the power is on.
6
(
POWER)
Press to turn the TV on and off.
7
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
8
SPEAKERS
BN68-02354EGH-Eng.indb 5 2009-06-30 �� 10:08:06
English - 6
Viewing the Connection Panel
Whenever you connect an audio or video system to your set, ensure that all elements are switched off. N
When connecting an external device, match the colour of the connection terminal to the cable. N
The product colour and shape may vary depending on the model. N
1
SERVICE1, 2
Connector for service.
2
POWER IN
Connect the supplied power cord.
3
COMPONENT IN
Audio (AUDIO L/R) and video (Y / P
B
/ P
R
) inputs for
Component.
4
PC IN(PC) / (AUDIO)
Connect to the video and audio output jack on your PC.
5
EXT (RGB)
Inputs or outputs for external devices, such as VCR, DVD,
video game device or video disc players.
Input/Output Specification
Connector
Input Output
Video Audio(L/R) RGB Video + Audio(L/R)
EXT
Only TV or DTV output
is available.
6
DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
7
3D SYNC OUT
Connect to 3D IR Emitter.
8
AUDIO OUT(AUDIO R/L)
Connect RCA audio signals from the TV to an external source,
such as Audio equipment.
9
HDMI IN 1, 2(DVI)
No additional Audio connection is needed for an HDMI to
HDMI connection.
When using an HDMI/DVI cable connection, you must use -
the HDMI IN 2 (DVI) jack.
What is HDMI?
N
High Definition Multimedia interface - allows the
transmission of high denition digital video data and
multiple channels of digital audio.
The HDMI/DVI terminal supports DVI connection to -
an extended device with the appropriate cable (not
supplied). The difference between HDMI and DVI is
that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature
installed, and supports multi - channel digital audio.
DVI AUDIO IN
DVI audio outputs for external devices.
0
ANT IN
75Ω Coaxial connector for Aerial/Cable Network.
Supported modes for HDMI/DVI and Component
480i 480p 576i 576p 720p 1080i 1080p
HDMI/DVI 50Hz X X X O O O O
HDMI/DVI 60Hz X O X X O O O
Component O O O O O O O
TV Rear Panel
Cable Television
Network
or
or
2
543 8 96
0
1
1 7
BN68-02354EGH-Eng.indb 6 2009-06-30 �� 10:08:08
English - 7
1
COMMON INTERFACE Slot
Insert CI (Common Interface) card into the slot.
(refer to page 26)
When not in - serting CI CARD in some channels,
Scramble Signal is displayed on the screen.
The - pairing information containing a telephone number,
CI CARD ID, Host ID, and other information will be
displayed in about 2~3 minutes. If an error message is
displayed, please contact your service provider.
When the channel - information conguration has nished,
the message Updating Completed is displayed,
indicating that the channel list is now updated.
Insert the CI-Card in the direction marked on it.
N
CAM is not supported in some countries and N
regions,check with your authorized dealer.
2
HDMI IN 3
Connect to the HDMI jack of a device with HDMI output.
3
AV IN (VIDEO, AUDIO L/R)
Video and audio inputs for external devices, such as a
camcorder or VCR.
The product colour and shape may vary depending on the model. N
TV Side Panel
2
3
1
BN68-02354EGH-Eng.indb 7 2009-06-30 �� 10:08:08
English - 8
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
N
1
POWER button
(turns the TV on and off)
2
Selects the TV mode directly.
3
Number buttons for direct channel
access
4
Displays the favourites channel list.
5
Temporary sound switch-off
6
Volume increase
Volume decrease
7
Available source selection
8
Use to see information on the current
broadcast
9
Use to quickly select frequently used
functions.
0
Control the cursor in the menu
!
Used to display Channel Lists on the
screen
@
Use these buttons in the Channel list,
etc.
$
Sound mode selection
%
Use these buttons in the Channel list,
and Anynet+.
^
Previous channel
&
Next channel
Previous channel
*
Displays the main on-screen menu
(
Electronic Program Guide (EPG)
display
)
Returns to the previous menu
a
Exit the on-screen menu
b
Selects SRS TruSurround HD mode.
c
Picture size selection
d
Digital subtitle display
e
Turn the audio description function on
or off.
Teletext Functions
2
Exit from the teletext display
(depending on the model)
7
Teletext mode selection (LIST/FLOF)
8
Teletext reveal
9
Teletext size
!
Fastext topic selection
@
Teletext store
#
Teletext display/mix both
teletext information and the normal
broadcast
^
Teletext sub page
&
P :Teletext next page
P
:Teletext previous page
*
Teletext index
)
Teletext hold
a
Teletext cancel
BN68-02354EGH-Eng.indb 8 2009-06-30 �� 10:08:09
English - 9
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside
N
the compartment.
3. Close the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the
N
remote control for a long time.
If the remote control doesn’t work, check the following N
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on your set.
N
2. Press the POWER
P
button on your set.
Yo
N
u also can press the POWER
P
button or the TV button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up / down (< / >) button on the remote control or < CH > button on your set.
When
N
you switch the set on for the very rst time, you will be asked to choose language in which the menus are to be displayed.
4. To switch your set off, press the POWER
P
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1. Press the POWER
P
button on the remote control.
T
N
he screen is turned off and a red standby indicator appears on your set.
2. To switch your set back on, simply press the POWER
P
, numeric buttons (0~9), TV button or channel up / down (< / >) button
again.
Do
N
not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug
the set from the mains and aerial.
BN68-02354EGH-Eng.indb 9 2009-06-30 �� 10:08:09
English - 10
Viewing the Menus
1. With the power on, press the MENU button. The main menu appears on the
screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input,
Application, Support.
2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER
E
button
to access the icon’s sub-menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
N
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The Tools menu changes depending on
which external input mode you are viewing.
1. Press the TOOLS button. The Tools menu will appear.
2. Press the ▲ or ▼ button to select a menu, then press the ENTER
E
button.
3. Press the ▲ / ▼ / ◄ / ► / ENTER
E
buttons to display, change, or use the selected
items. For a more detailed description of each function, refer to the corresponding
page.
Anynet
+
(HDMI-CEC), see page 30
Picture Mode, see page 17
Sound Mode, see page 23
Sleep Timer, see page 27
Energy Saving, see page 26
Add to Favourite (or Delete from Favourite), see page 15
Auto Adjus tment, see page 21
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
Press the
O INFO button to viewing the information.
Press the INFO button on the remote control. The TV will display the channel, the type of
sound, and the status of certain picture and sound settings.
▲, ▼: You can view other channel’s information. If you want to move to the currently
selected channel, press ENTER
E
button.
◄, ►: You can view the desired program’s information at the current channel.
Press the
N INFO button once more or wait approximately 10 seconds and the display
disappears automatically.
DTV Air
15
abc1
18:11 Thu 6 Jan
Life On Venus Avenue
Unclassified
No Detaild Information
E Watch
' Information
Mode : Standard
Cell Light : 4
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Picture
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Energy Saving : Off
Add to Favourite
U
Move
E
Enter
e
Exit
BN68-02354EGH-Eng.indb 10 2009-06-30 �� 10:08:10
English - 11
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.
N
The Screen Saver is activated if there is no operating signal for longer than 15 minutes. N
1. Press the POWER button on the remote control. You can set the menu language. menu is automatically displayed. Select the
appropriate language by pressing the ▲ or ▼ button.
Press the ENTER
E
button to conrm your choice.
2. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER
E
button.
We recommend setting the TV to
N Home Use mode for the best picture in your home
environment.
Store Demo
N mode is only intended for use in retail environments.
If the unit is accidentally set to
N Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on
the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
3. Press the ENTER
E
button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER
E
button to conrm
your choice.
4. Press the ▲ or ▼ button to memorize the channels of the selected connection, then press the ENTER
E
button.
Air: Air antenna signal.
Cable: Cable antenna signal.
5. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER
E
button to select Start.
Digital & Analogue : Digital and Analogue channels.
Digital : Digital channels.
Analogue : Analogue channels.
For more de
N tailed description of selecting Cable mode,, refer to page 12.
The
N
channel search will start and end automatically.
Pr
N
ess the ENTER
E
button at any time to interrupt the memorization process.
A
N
fter all the available channels are stored, the message Set the Clock Mode. is displayed.
6. Press the ENTER
E
button. Press the ▲ or ▼ button to select Auto, then Press the ENTER
E
button.
If
N
you select Manual, Set current date and time is displayed. (refer to page 27)
If
N
you have received a digital signal, the time will be set automatically. If not, see page 27 to set the clock.
7. The brief instruction on How to get the best performance from your new HDTV. is displayed. Press the ENTER
E
button.
Th
N
is menu is available HD Connection Guide in the Support menu.
8. The message Enjoy your TV is displayed. When you have nished, press the ENTER
E
button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTER
E
button.
2. Press the ENTER
E
button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.
If you want to change PIN number, refer to 25 page.
N
The N Plug & Play feature is only available in the TV mode.
Setup
Plug & Play
Menu Language : English
Time
Broadcast
Security
General
Plug & Play
You can set the menu language.
U
Move
E
Enter
Nederlands
English
Eesti
Menu Language :
BN68-02354EGH-Eng.indb 11 2009-06-30 �� 10:08:10
English - 12
Storing Channels
Country
Digital Channel : You can change the country for digital channels.
Analogue Channel
: You can change the country for analogue channels.
The PIN number input screen appears. Enter your 4 digit PIN number. N
Auto Store
Scans for all channels with active broadcast stations (and availability depends on your
country) and stores them in the TV's memory.
You can memorize the channels of the selected connection.
Air : Air antenna signal.
Cable : Cable antenna signal.
When selecting Cable,
N
Search Mode : Displays the search mode. (Quick)
Network ID - : Displays the network identication code.
Frequency - : Displays the frequency for the channel.
Modulation - : Displays available modulation values.
Symbol Rate - : Displays available symbol rates.
Search Mode : Displays the search mode. (Full, Network)
Frequency (Start~Stop) - : Displays the frequency for the channel.
Modulation - : Displays available modulation values.
Symbol Rate - : Displays available symbol rates.
You can memorize the Channel source
Digital & Analogue : Digital and Analogue channels.
Digital : Digital channels.
Analogue : Analogue channels.
If you want to stop
N Auto Store, press the ENTER
E
button.
The
N Stop Auto Store? message will be displayed.
Select
N Yes by pressing the ◄ or ► button, then press the ENTER
E
button.
If a channel is locked using the
N Child Lock function, the PIN input window appears.
Channel Control
Continued...
Channel
Country
Auto Store
Manual Store
Cable Search Option
Now & Next Guide
Full Guide
Default Guide : Now/Next
BN68-02354EGH-Eng.indb 12 2009-06-30 �� 10:08:10
English - 13
Manual Store
Scans for a channel manually and stores it in the TV’s memory.
Digital Channel (Digital)
Manual store for digital channels.
Digital Channel is only available in DTV mode.
N
Channel : Set the Channel number using the ▲, ▼ or number (0~9) buttons.
Frequency : Set the frequency using the number buttons.
Bandwidth : Set the bandwidth using the ▲, ▼ or number (0~9) buttons.
When it has nished, channels are updated in the channel list.
N
Analogue Channel
Manual store for analogue channel.
Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
buttons.
Colour System → Auto / PAL / SECAM / NTSC4.43 : Sets the colour system value using the ▲ or ▼ button.
Sound System BG / L / I / DK: Sets the sound system value using the ▲ or ▼ button.
Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
You can also select the channel number directly by pressing the number (
N
0~9) buttons.
If there is abnormal sound or no sound, reselect the sound standard required.
N
Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the rst channel or the channel that you selected is received on the screen.
Store (When you store the channel and associated programme number): Set to OK by pressing the ENTER
E
button.
Channel mode
N
C - (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this
mode.
S - (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Cable Search Options (Cable)
You can add directly the channel search range in the network search mode. (Dependingon the each country)
Frequency (Start~Stop) : Displays the frequency for the channel.
Modulation : Displays available modulation values.
Symbol Rate : Displays available symbol rates.
Set the
N Frequency (Start~Stop) and Symbol Rate using the number (0~9) buttons.
Now & Next Guide / Full Guide
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out
of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information
becomes available.
Now & Next Guide
: For the six channels indicated in the left-hand column, displays the Current programme and the Next
programme information.
Full Guide :
Displays the programme information as time ordered One hour segments. One hours of programme information is
displayed which may be scrolled forwards or backwards in time.
Continued...
BN68-02354EGH-Eng.indb 13 2009-06-30 �� 10:08:11
English - 14
Default Guide
Now/Next / Full Guide :
You can decide whether to display either the Now/Next or
the Full Guide when the GUIDE button on the remote control is pressed.
You can also display the guide menu simply by pressing the
O
GUIDE button.
Using the Now & Next Guide / Full Guide
▲ / ▼ / ◄ / ►
(ENTER)
Select a programme by pressing the ▲/▼/◄/► button.
If the next progrmme is selected, it is scheduled with the clock icon displayed. If the ENTER
E
button is
pressed again, press the ▲/▼/◄/► button to select Cancel Schedules, the scheduling is canceled with the
clock icon gone.
For details about scheduling programmes, refer to the section.
RED Toggle between the Now/Next or Full Guide.
GREEN Full Guide: Scroll backwards quickly (-24 hours).
YELLOW Full Guide: Scroll forwards quickly (+24 hours).
BLUE Exit the guide.
INFO
INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video
Quality Information (HD/SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief
summary of the highlighted programme are included on the detailed information. “…” will be appeared if the
summary is long.
Channel List
For the detailed procedures on using the Channel List, refer to the descriptions on pages 15~16.
Channel Mode
When the press the P </> button, Channels will be switched within the selected channel list.
Added Ch.
: Channels will be switched within the memorized channel list.
Favourite Ch.
: Channels will be switched within the favourite channel list.
Fine Tune
(only analogue channels)
If the reception is clear, you do not have to ne tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to ne tune the channel manually.
Fine tuned channels that have been saved are marked with an asterisk
N * on the right-hand side of the channel number in the
channel banner.
If you do not store the ne-tuned channel in memory, adjustments are not saved.
N
To reset the ne-tuning, select N Reset by pressing the ▼ button and then press the ENTER
E
button.
Channel
Now & Next Guide
Full Guide
Default Guide : Now/Next
Channel List
Channel Mode : Added Ch.
Fine Tune
Full Guide
DTV Cable 900 f tn 2:10 Tue 1 Jun
Freshmen On Campus
2:00 - 2:30
No Detailed Information
Today 2:00 - 3:00 3:00 - 4:00
Mint Extra
Loaded
Fresh 40 with Dynamite MC
The Distillery
Smash Hits! Sunday
900 f tn
901 ITV Play
902 Kerrang!
903 Kiss
903 oneword
903 Smash Hits!
Street Hypn..
Kisstory
No Information
No Information
No Information
Freshmen O..
Watch
Information
Page
Now/Next
Exit
Now & Next Guide
DTV Cable 900 f tn 2:10 Tue 1 Jun
Freshmen On Campus
2:00 - 2:30
No Detailed Information
Mint Extra
Loaded
Fresh 40 with Dynamite MC
The Distillery
Smash Hits! Sunday
900 f tn
901 ITV Play
902 Kerrang!
903 Kiss
903 oneword
903 Smash Hits!
Street Hypn..
Kisstory
No Information
No Information
No Information
Freshmen O..
Watch
Information
Page
Full Guide
Exit
Now Next
BN68-02354EGH-Eng.indb 14 2009-06-30 �� 10:08:12
English - 15
Managing Channels
Using this menu, you can Add / Delete or set Favourite channels and use the programme
guide for digital broadcasts.
Select a channel in the
N All Channels, Added Channels, Favourites, or Programmed
screen by pressing the ▲ / ▼ buttons, and pressing the ENTER
E
button.
Then you can watch the selected channel.
All Channels :
Shows all currently available channels.
Added Channels :
Shows all added channels.
Favourites :
Shows all favourite channels.
Programmed :
Shows all current reserved programmes.
Using the Colour buttons with the Channel List
N
Red ( - Channel Type): Toggle between your TV, Radio, Data/Other and All.
Green ( - Zoom): Enlarges or shrinks a channel number.
Yellow ( - Select): Selects multiple channel lists.
T - TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from
Favourite), Timer Viewing, Edit Channel Name, Edit Channel Number, Sort, Lock
(or Unlock), Select All (or Deselect All), or Auto Store menu.
(The Options menus may differ depending on the situation.)
Channel Status Display Icons
N
A
An Analogue channel.
c
A channel selected by pressing the yellow button.
A channel set as a Favourite.
(
A programme currently being broadcast.
\
A locked channel.
)
A reserved programme
Press the
O CH LIST button on the remote control to bring up the channel lists.
Channel List Tools Menu (in All Channels / Added Channels /
Favourites)
Press the N TOOLS button to use the Tools menu.
Option menu items may differ depending on the channel status.
N
Add / Delete
You can delete or add a channel to display the channels you want.
All deleted channels will be shown on
N All Channels menu.
A gray-coloured channel indicates the channel has been deleted.
N
The N Add menu only appears for deleted channels.
You can also delete a channel to the
N Added Channels or Favourite menu in the
same manner.
Add to Favourite / Delete from Favourite
You can set channels you watch frequently as favourites.
Press the T TOOLS button to display Tools menu.
You can also add the favourite channel by selecting ToolsAdd to Favourite (or Delete from Favourite).
The “♥” symbol will be displayed and the channel will be set as a favourite.
N
All favourite channels will be shown on N Favourite menu.
To select the Favourite channels you have set up, press the
O FAV.CH button on the
remote control.
Timer Viewing
If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List;
even when you are watching another channel. To reserve a programme set the current time rst. (See page 27)
Only memorized channels can be reserved.
N
You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control. N
Reserving a programme will be shown on N Programmed menu.
Digital Programme Guide and Viewing Reservation
N
When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears.
You can reserve a programme according to the procedures described above.
Channel
Full Guide
Default Guide : Now/Next
Channel List
Channel Mode : Added Ch.
Fine Tune
824 UKTV Gold
825 UKTV style
A
1 C --
A
2 C
--
A
3
C
--
A
4 C
--
A
5 C
--
A
6 C
--
A
7 C
--
A
8 C
--
Added Channels
All
Channel Type
Zoom
Select
Tools
824 UKTV Gold
825 UKTV style
A
1 C --
A
2 C
--
A
3
C
--
A
4 C
--
A
5 C
--
A
6 C
--
A
7 C
--
A
8 C
--
All Channels
All
Channel Type
Zoom
Select
Tools
Delete
Add to Favourite
Timer Viewing
Edit Channel Name
Sort
Lock
Continued...
BN68-02354EGH-Eng.indb 15 2009-06-30 �� 10:08:12
English - 16
Edit Channel Name (only analogue channel)
Channels can labeled so that their call letters appear whenever the channel is selected.
The names of digital broadcasting channels are automatically assigned and cannot be labeled. N
Edit Channel Number (only digital channel)
You can also edit the channel number by pressing the number buttons on the remote control.
Sort (only analogue channel)
This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using
the auto store.
Lock / Unlock
You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child Lock is
set to on. (see page 25)
The PIN nu
N
mber input screen appears. Enter your 4 digit PIN number.
The default PIN number of a new TV set is ‘0-0-0-0’
N
. You can change the PIN, by selecting Change PIN from the menu.
The
N
\” symbol will be displayed and the channel will be locked.
Select All / Deselect All
Select All : You can select all the channels in the channel list.
Deselect Al l: You can deselect all the selected channels in the channel list.
You can perform the add / delete, add to Favourites / delete from Favourites, or lock / unlock function for multiple channels at
N
the same time. Select the required channels and press the yellow button to set all the selected channels at the same time.
The
N c mark appears to the left of the selected channels.
You can only select
N Deselect All when there is a selected channel.
Auto Store
For further details on setting up options, refer to page 12. N
If a channel is locked using the N Child Lock function, the PIN input window appears.
Channel List Option Menu (in Programmed)
You can view, modify or delete a reservation.
Press the
N TOOLS button to use the option menu.
Change Info : Select to change a viewing reservation.
Cancel Schedules : Select to cancel a viewing reservation.
Information : Select to view a viewing reservation.
(You can also change the reservation information.)
Select All: Select all reserved programmes.
Programmed
1 / 1 / 2009
13:59 5 TV1 Quincy, M.E
18:59 2 TV3 The Equalizer
20:59 2 TV3 McMillan & Wife
21:59 2 TV3 M.Spillane’s mike Hammer
Change Info
Cancel Schedules
Information
Select All
All
Zoom
Select
Tools
Information
BN68-02354EGH-Eng.indb 16 2009-06-30 �� 10:08:12
English - 17
Changing the Picture Settings
Mode
You can select the type of picture which best corresponds to your viewing requirements.
Dynamic : Selects a high-denition picture for bright environments.
Standard : Selects the optimal picture display for normal environments.
Movie : Selects a comfortable picture display for dark environments.
Press the
T
TOOLS button to display Tools menu.
You can also set the picture mode by selecting Tools → Picture Mode.
Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options that allow you to control the picture quality.
Cell Light : Adjusts the pixel brightness.
Contrast : Adjusts the contrast level.
Brightness : Adjusts the brightness level.
Sharpness : Adjusts the sharpness.
Colour : Adjusts the colour saturation of the picture using the bar on the screen.
Tint (G/R) : The closer to Red 100, the more saturated the red colour becomes.
Select a picture mode to be adjusted rst. The adjusted values are saved for each picture mode.
N
When you make changes to N Cell Light, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted
accordingly.
In Analogue TV, Ext., AV modes of the PAL system, you cannot use the Tint Function.
N
In N PC mode, you can only make changes to Cell Light, Contrast and Brightness.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
The energy consumed during use can be signicantly reduced if the level of brightness of the picture is reduced, and then this N
will reduce the overall running cost.
Advanced Settings
Samsung’s new TVs allow you to make even more precise picture settings than
previous models. See below to adjust detailed picture settings.
Advanced Settings
N is available in Standard or Movie mode.
In PC mode, you can only make changes to
N Gamma and White Balance from
among the Advanced Settings items.
Black Tone → Off / Dark / Darker / Darkest
You can select the black level on the screen to adjust the screen depth.
Dynamic Contrast → Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the primary colour (Red, Green, Blue) Intensity.
Colour Space
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience the
most natural colour.
Auto : Automatically sets the colour range depending on the input video source.
Native : Sets a colour range wider than that of the input video source.
White Balance
You can adjust the colour temperature for more natural picture colours.
R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain : Changing the adjustment value will refresh the adjusted screen.
Reset : Resets the default white balance.
Flesh Tone
You can emphasize the pink esh tone in the picture.
Changing the adjustment value will refresh the adjusted screen.
N
Edge Enhancement → Off / On
You can emphasize object boundaries in the picture.
Picture Control
Continued...
Mode : Standard
Cell Light : 4
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Picture
Colour : 50
Tint (G/R) : G50/R50
Advanced Settings
Picture Options
Picture Reset
Picture
BN68-02354EGH-Eng.indb 17 2009-06-30 �� 10:08:13
English - 18
Picture Options
In N PC mode, you can only make changes to the Colour Tone, Size and Screen
Burn Protection from among the items in Picture Options.
Colour Tone Cool / Normal / Warm1 / Warm2
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected
N Picture mode.
Warm1
N or Warm2 is only activated when the picture mode is Movie.
Size
You can select the picture size which best corresponds to your viewing requirements.
Auto Wide : Sets the picture in Auto Wide format.
16:9 : Sets the picture to the 16:9 aspect ratio.
Wide Zoom : Select this menu to view 4:3 aspect ratio pictures over a 16:9 aspect ratio TV by stretching the 4:3 picture
vertically.
Zoom : Stretches the 16:9 aspect ratio picture vertically.
4:3 : Sets the picture to the 4:3 aspect ratio.
Screen Fit : Displays the full native HD signal that cannot be viewed using a normal TV.
The picture size options may vary depending on the input source.
The items available may differ depending on the selected mode.
N
In N PC Mode, only 16:9 and 4:3 mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
Temporary image retention may occur when viewing a static image on the set for more than two hours. N
Wide Zoom N : Press the ► button to select Position, then press the ENTER
E
button.
Press the ▲ or ▼ button to move the screen up / down. Then press the ENTER
E
button.
Zoom
N : Press the ► button to select Position, then press the ENTER
E
button. Press the ▲ or ▼ button to move the picture
up and down. Then press the ENTER
E
button. Press the ► button to select Size, then press the ENTER
E
button. Press the
▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTER
E
button.
After selecting
N Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing
the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset
N : Press the ◄ or ► button to select Reset, then press the ENTER
E
button. You can initialize the setting.
If you use the
N Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan
function.
You can select these options simply by pressing the
O
P.SIZE button on the remote
control.
Screen Mode
When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS
(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is
intended for users to select it.
16:9 : Sets the picture to the 16:9 aspect ratio.
Wide Zoom : Select this menu to view 4:3 aspect ratio pictures over a 16:9 aspect ratio TV by stretching the 4:3 picture
vertically.
Zoom : Stretches the 16:9 aspect ratio picture vertically.
4:3 : Selects the screen mode as 4:3.
This function is available in
N
Auto Wide mode.
This function is not available in
N
PC, Component or HDMI mode.
Digital NR Off / Low / Medium / High / Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
N
HDMI Black Level Normal / Low
You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).
N
Continued...
Tint (G/R) : G50/R50
Advanced Settings
Picture Options
Picture Reset
Picture
BN68-02354EGH-Eng.indb 18 2009-06-30 �� 10:08:13
English - 19
Film Mode
You can optimize the picture mode for watching movies.
Off : Basic video image processing applied and No auto-detection for lm-based programs.
Auto : Automatically adjusts for the best image quality between lm and video programs.
Screen Burn Protection
Congures the Screen Burn Protection Options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the screen.
Pixel Shift : To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This
technology enables you to set picture movement up/down (Vertical) and side to side (Horizontal). The Time setting allows you to
program the time between movement of the picture in minutes.
Set
N
Pixel Shift to On by pressing the ▲ or ▼ button, then press the ENTEREbutton.
Select the required option by pressing the ▲ or ▼ button, then press the
N
ENTERE button.
Available options:
N
Horizontal, Vertical, Time.
Optimum condition for pixel shift
N
Item TV/Ext/AV/Component/HDMI/PC
Horizontal 0~4 2
Vertical 0~4 2
Time (minute) 1~4 min 3 min
The Pixel Shift value may differ depending on the monitor size (inches) and mode.
N
This function is not available in the
N
Screen Fit mode.
Scrolling : This function helps remove after images on the screen by moving all the pixels on the PDP according to a pattern
Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image
on the screen for a long time.
Side Grey : When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white
balance on both extreme left and right sides.
Dark - : When you set the screen ratio to 4:3, it darkens the left and right sides.
Light - : When you set the screen ratio to 4:3, it brightens the left and right sides.
BN68-02354EGH-Eng.indb 19 2009-06-30 �� 10:08:13
English - 20
Using the 3D Function
You can enjoy 3D movies and games on your TV. The 3D effects function enables you to view 3D images using special 3D glasses.
Connections
1. Connect a HDMI/DVI cable between the HDMI IN 2(DVI) jack on the TV and the PC output jack on your computer.
2. Connect a 3.5mm Stereo Audio Cable between the DVI AUDIO IN jack on the TV and the Audio Out jack of the sound card on your
computer.
3. Connect the Emitter to the 3D SYNC OUT port on the rear panel of the TV.
4. Turn the TV on and set the source of the TV to HDMI2/DVI.
For more information on the 3D glasses (including the Emitter), refer to the user manual of your 3D glasses.
N
Adjust the PC resolution N : - PS42B450/PS42B451 : 1024 x 768@60Hz
- PS50B450/PS50B451 : 1024 x 768@60Hz, 1360 x 768@60Hz
Optimum PC resolution for PS50B450/PS50B451 is 1360x768. When 1024x768 signal is connected in 3D mode, the picture will be
N
shown in 4:3 format with left and right side grey bars appeared.
The 3D IR Emitter communicates with the 3D glasses.
N
Therefore, the 3D IR Emitter should be located near the 3D glasses.
It is activated when the HDMI or DVI input signal is RGB, and DVI Sound is supported.
N
When the power is turned on or off, the mode changes to the default ( N Off) and the Format is saved.
To use the 3D Effect function, a graphics card supporting 3D or 3D software is required.
N
The 3D glasses and the Emitter must be manufacturer by the same company. N
If you play a game or watch TV while wearing the 3D glasses for long periods of time, you may experience eyestrain or a headache. N
3D glasses (including the Emitter) not manufactured by Samsung may not be supported. N
If you  nd the screen  ickering while the 3D function is used, change the environmental lighting darker or turn off the  uorescent N
lamp to watch the screen for its best condition.
The appearance of the 3D glasses (including Emitter) may differ depending on the model of your glasses.
N
3D Glasses
(Not supplied)
3D IR Emitter
(Not supplied)
PC
TV Rear Panel
3.5mm Stereo Audio Cable
2
HDMI/DVI Cable (Not supplied)
1
Continued...
BN68-02354EGH-Eng.indb 20 2009-06-30 �� 10:08:14
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182

Samsung PS42B450B1W Kasutusjuhend

Kategooria
Plasmatelerid
Tüüp
Kasutusjuhend

teistes keeltes