Kenwood FPM910 Omaniku manuaal

FPM91

FPM90

instructions

istruzioni

instrucciones

Bedienungsanleitungen

gebruiksaanwijzing

Instrukcja obsługi

instruções

TYPE: FPM90

TYPE: FPM91

English 3 - 16

Nederlands 17 - 31

Français 32 - 46

Deutsch 47 - 61

Italiano 62 - 76

Dansk 77 - 89

Svenska 90 - 102

Norsk 103 - 116

Suomi 117 - 130

(7

)3 )8

):

*2

*1

)9

*4

*8

*9

*:

)4

)5

)6

)7

*3

*5

*6

*7

(8

(9

(:

)1

)2

























(2

(1

(6



(5



(4 (3



Type FPM91

A - standard attachments

B - optional attachments

)4

)5

(3

(4

(5

)3

)2

):

)8

)9

)7



(1

(7

(2

(6

)3 + )4 )8 *1

)5 + )6

*:

*7

*3 *6

)6

(8

(9

)1

(:

)7

a

b

*8

a

b

c

*9

a

b

*2

c

a

b

d

e

f

g

safety

ORead these instructions carefully and retain for future reference.

ORemove all packaging and any labels.

OIf the plug or cord is damaged it must, for safety reasons, be replaced by

Kenwood or an authorised Kenwood repairer in order to avoid a hazard.

OThe blades and discs are very sharp, handle with care. Always hold by

the finger grip at the top, away from the cutting edge, both

when handling and cleaning.

ODo not lift or carry the processor by the handle - or the handle may break

resulting in injury.

OAlways remove the knife blade before pouring contents from the bowl.

OKeep hands and utensils out of the processor bowl and blender goblet

whilst connected to the power supply.

OSwitch off and unplug:-

O

before fitting or removing parts;

O

when not in use;

O

before cleaning.

ONever use your fingers to push food down the feed tube. Always use the

pusher/s supplied.

ONever fit the blade unit to the power unit without the blender

goblet or compact chopper/grinder fitted.

OBefore removing the lid from the bowl or blender or compact chopper/

grinder from the power unit:-

O

switch off;

O

wait until the attachment/blades have completely stopped;

O

be careful not to unscrew the blender goblet or compact chopper/

grinder from the blade assembly.

ODO NOT process hot ingredients in the processor bowl.

ODo not use the lid to operate the processor, always use the on/off speed

control.

OThis appliance will be damaged and may cause injury if the

interlock mechanism is subjected to excessive force.

OAlways unplug your food processor when not in use.

ONever use an unauthorised attachment.

ONever leave the appliance unattended when it is operating.

ONever use a damaged appliance. Get it checked or repaired: see ‘service

& customer care’.

ONever let the power unit, cord or plug get wet.

ODon’t let excess cord hang over the edge of a table or worktop or touch

hot surfaces.

3

ODo not exceed the maximum capacities stated in the recommended speed

chart.

OThis appliance shall not be used by children. Keep the appliance and its

cord out of reach of children.

OChildren should be supervised to ensure that they do not play with the

appliance.

OAppliances can be used by persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe

way and if they understand the hazards involved.

OOnly use the appliance for its intended domestic use. Kenwood will not

accept any liability if the appliance is subject to improper use, or failure to

comply with these instructions.

OMisuse of your processor/blender can result in injury.

OThe maximum rating is based on the attachment that draws the greatest

load. Other attachments may draw less power.

Refer to the relevant section under “using the attachments” for additional

safety warnings for each individual attachment.

blender safety

O SCALD RISK: Hot ingredients must be allowed to cool to room

temperature before placing in the goblet or before blending.

OAlways take care when handling the blade assembly and avoid touching

the cutting edge of the blades when cleaning.

OBe careful if hot liquid is poured into the blender as it can be ejected out of

the appliance due to sudden steaming.

OOnly operate the blender with the lid in place.

OOnly use the goblet with the blade assembly supplied.

ONever run the blender empty.

OTo ensure the long life of your blender, do not run it for longer than 60

seconds.

OSmoothie recipes - never blend frozen ingredients that have formed a solid

mass during freezing, break it up before adding to the goblet.

OImportant - The skirt on the base of the goblet is fitted during

manufacture and no attempt should be made to remove it.

4

5

IMPORTANT: HOT

BLENDING INSTRUCTIONS

To minimise the possibility of scalding when blending hot ingredients keep

hands and other exposed skin away from the lid to prevent possible burns.

The following precautions must be observed:

OCAUTION: Blending very hot ingredients may result in hot

liquid and steam being forced suddenly past the lid or filler

cap (7.

OWe recommend that hot ingredients are allowed to cool

before blending.

ONEVER exceed 1200mls/5 cups capacity if processing hot liquids, such

as soups (refer to the markings on the goblet).

OALWAYS commence blending at a low speed and gradually increase

the speed. NEVER blend hot liquids by using the Pulse setting.

OLiquids which tend to foam such as milk, should be limited to a

maximum capacity of 1000mls/4 cups.

OTake care when handling the blender as the goblet and its contents will

be very hot.

OTake particular care when removing the lid. The lid is designed to be a

tight fit to prevent leakage. If necessary protect your hands with a cloth

or oven gloves when handling.

OEnsure the goblet is securely attached to the base and when removing

from the appliance, guide the base and ensure it is removed together

with the goblet.

OEnsure that the lid and filler cap are securely in place before every

blending operation.

OAlways ensure that the vents in the filler cap are clear before every

blending operation )2.

OWhen fitting the lid to the goblet always ensure that the lid and goblet

rim are clean and dry to ensure a good seal and prevent spillage.

slicing/grating disc safety

ONever remove the lid until the cutting disc has completely

stopped.

OHandle the cutting discs with care - they are extremely

sharp.

ODo not overfill the bowl – do not exceed the maximum

capacity level marked on the bowl.

compact chopper/grinder safety

ONever fit the blade unit to your food processor without the jar fitted.

ONever unscrew the jar while the compact chopper/grinder is fitted to your

appliance.

ODo not touch the sharp blades – Keep the blade unit away from children.

ONever remove the compact chopper/grinder until the blades have

completely stopped.

OTo ensure the long life of your compact chopper/grinder, do not run it

continuously for longer than 60 seconds. Switch off as soon as you have

got the right consistency.

OThe appliance will not work if the compact chopper/grinder is incorrectly

fitted.

ODo not process turmeric root in the compact chopper/grinder as it is too

hard and may damage the blades.

juice extractor safety

ODo not use the juice extractor if the filter is damaged.

OOnly use the pusher supplied. Never put your fingers in the feed tube.

Unplug before unblocking the feed tube.

OBefore removing the lid, switch off and wait for the filter to stop.

6

before plugging in

O Make sure your electricity supply is the same as the one

shown on the underside of your appliance.

O WARNING: THIS APPLIANCE MUST BE EARTHED.

O This appliance conforms to EC Regulation 1935/2004 on

materials and articles intended to come into contact with

food.

before using for the first time

1 Remove the plastic blade covers from the knife blade.

Take care the blades are very sharp. These covers

should be discarded as they are to protect the blade during

manufacture and transit only.

2 Wash the parts see ‘care & cleaning’

key

processor

 power unit

 detachable drive shaft

 bowl

 lid

 wide feed tube

 pushers

 safety interlocks

 cord storage (at back)

 power on light

(1 auto button

(2 speed/pulse control

weighing function (Type FPM91)

(3 kg/lb button

(4 display screen

(5 on/zero button

(6 weighing tray

thermoresist blender

(7 filler cap

(8 lid

(9 goblet

(: sealing ring

)1 blade unit

)2 filler cap vents

A - standard attachments

)3 knife blade

)4 dough tool

)5 dual whisk

)6 folding tool

)7 max capacity disc

)8 4mm slicing disc

)9 2mm slicing disc

): 4mm grating disc

*1 2mm grating disc

*2 attachment storage box

B - optional attachments

Not all the attachments listed below will be included with your

food processor model. Attachments are dependent upon the

model variant. For more information or to order additional

attachments refer to the “service and customer care” section.

*3 extra fine grater disc (if supplied)

*4 fine Julienne disc (if supplied)

*5 decorative slicing disc (if supplied)

*6 French fry disc (if supplied)

*7 mini bowl and blade (if supplied)

*8 compact chopper/grinder (if supplied)

*9 citrus juicer (if supplied)

*: metal juicer extractor (if supplied)

to use your food processor

1 Fit the detachable drive shaft onto the power unit  – push

down lightly to ensure the drive shaft is fully engaged.

2 Then fit the bowl to the power unit. Place the handle

towards the back on the right hand side and turn clockwise

 until it locks.

3 Fit an attachment over the bowl drive shaft.

O Always fit the bowl and attachment onto the processor

before adding ingredients.

4 Fit the lid  - ensuring the top of the drive shaft/tool locates

into the centre of the lid.

5 Fit the pushers to the feed tube – turn the small pusher

clockwise to lock in position .

O The processor will not operate if the bowl, lid or

wide feed tube pusher are not fitted correctly

into the interlocks. Check that the feed tube and

bowl handle are situated to the right hand side.

6 Plug in. The Power On light will come on and flash until the

bowl and lid are fitted correctly. Select one of the following

options: -

Auto Button – the light will come on when the Auto Button is

pressed and the optimum speed for the attachment will be

automatically selected.

Speed Control – manually select the required speed (refer to

the recommended speed chart).

Pulse – use the pulse (P) for short bursts. The pulse will

operate for as long as the control is held in position.

7 At the end of processing turn the speed control to the ‘O’

off position or if using the Auto press the button and the

light will go out.

O The Power On light will flash if either the lid,

bowl or wide feed tube are not fitted.

O The Power On and Auto lights will flash if the

Auto is selected but the interlocks are not

engaged.

O The Auto Button will not operate if a speed is

selected on the speed control.

O Always switch off and unplug before removing

the lid.

important

O Your processor is not suitable for crushing or grinding coffee

beans, or converting granulated sugar to caster sugar.

7

Eco function

If the food processor is left plugged in for over 30 minutes

without being used, it will go into standby mode to reduce

energy consumption.

O The Power On light will pulse slowly and the food processor

will not operate until one of the following actions are carried

out:-

O The Auto Button is pressed.

O The speed control is turned to a speed and then turned

back to the ‘O’ off position.

The light will change to being constantly lit when ready to

use.

Note: If the bowl or lid are not engaged into the interlock the

power on light will pulse more rapidly than the Eco function.

weighing function (Type FPM91)

Your food processor is fitted with a built in weighing function

to allow ingredients to be weighed straight into the bowl or

blender goblet.

O The Maximum weighing capacity is 3Kg. This is the total

weight of all the ingredients including the weight of the bowl

or goblet.

to use the weighing function

1 Always fit the detachable drive

shaft, bowl and attachment or

blender goblet onto the power unit

before adding ingredients.

2 Plug in – the display screen will

remain blank.

3 Press the ON/ZERO button once

and the display screen will light up.

4 Press the (kg/lb) button to select

either grams or ounces. The

display will default to kg/g when

first switched on.

O The unit weighs in 2g increments

and teaspoon/tablespoon measures are recommended for

weighing small quantities.

5 Check the display shows ‘0’, if not, zero by pressing the ON/

ZERO button. Then weigh the required ingredients straight

into the bowl or goblet. After the weight is displayed, press

the ON/ZERO button and the display will return to ‘0’.

Add the next ingredients and that weight will be displayed.

Repeat until all ingredients are weighed.

O If the display is not zeroed and either the ingredients or the

bowl/attachment/lid are removed the display will show

[ - - - -] to represent a minus reading.

To zero press the ON/ZERO button once.

6 Add the lid and select a speed to operate the processor.

O During operation the display screen will freeze [- - - -] until

the speed control returned to the ‘O’ off position.

O After processing the last weight will be displayed on the

screen when the speed control is returned to the ‘O’ off

position. Note: The weight of the lid will be included if the

display is not zeroed before switching on.

O The weight of any additional ingredients added down the

feed tube whilst the processor is running will not be shown

on the display screen.

(6 weighing tray

A removable weighing tray

is supplied for weighing

ingredients without the bowl or

blender.

To use, place the tray on top

of the power unit. Then follow

steps 2 to 5 under ‘to use the

weighing function’.

To remove, just lift the tray off.

auto switch off

O The display screen will turn off automatically if the same

weight reading is shown after 5 minutes.

O The display screen can be turned off manually by pressing

and holding down the ON/ZERO button for a few seconds.

important

O Do not overload by exceeding the maximum weighing

capacity of 3Kg. The display will show [0 – Ld] if the

weighing function is overloaded.

O Do not subject the power unit to excessive force as this may

damage the weighing sensor.

O Always place the processor on a dry flat surface prior to

weighing.

O Do not move the power unit during operation of the weighing

function.

to use your thermoresist blender

1 Fit the sealing ring (: into the blade unit )1 - ensuring the

seal is located correctly in the grooved area.

O Leaking will occur if the seal is damaged or

incorrectly fitted.

2 Hold the underside of the blade unit )1 and insert the blades

into the goblet - turn anti-clockwise until it clicks . Refer to

the graphics on the underside of the blade unit as follows:

- unlocked position

- locked position

The blender will not work if incorrectly

assembled.

3 Put your ingredients into the goblet.

4 Fit the lid to the goblet and push down to secure . Fit the

filler cap.

5 Place the blender onto the power unit, and turn clockwise 

to lock.

O The appliance will not operate if the blender is

incorrectly fitted to the interlock.

6 Select Auto, or a speed (refer to the recommended speed

chart) or use the pulse control.

hints

O When making mayonnaise, put all the ingredients, except

the oil, into the blender. Remove the filler cap. Then, with the

appliance running, add the oil slowly through the hole in the

lid.

O Thick mixtures, e.g. pâtés and dips, may need scraping down.

If the mixture is difficult to process, add more liquid.

O Ice crushing - operate the pulse in short bursts until crushed to

the desired consistency.

O The processing of spices is not recommended as they may

damage the plastic parts.

O The appliance will not work if the blender is incorrectly fitted.

8

O To blend dry ingredients - cut into pieces, remove the filler

cap, then with the appliance running, drop the pieces down

one by one. Keep your hand over the opening. For best

results empty regularly.

O Don’t use the blender as a storage container. Keep it empty

before and after use.

O Never blend more than 1.6 litres (56 fl oz) - less for frothy

liquids like milkshakes.

9

recommended speed chart

tool/attachment function recommended processing maximum

speed time N capacities

Knife blade All in one cake mixes 8 15-20 secs 2Kg/4lb 8oz

total weight

Pastry - rubbing fat into flour 5 – 8 10 secs 500g/1lb 2oz

flour weight

Adding water to combine pastry ingredients 10-20 secs

Chopping fish and lean meat Pulse – 8 10-30 secs 1Kg/2lb 4oz

Pâtés and terrines max lean beef

Chopping vegetables Pulse 5-10 secs 500g/1lb 2oz

Chopping nuts 8 30-60 secs 200g/8oz

Pureeing soft fruit, cooked fruit and vegetables 8 10-30 secs 1Kg/2lb 4oz

Sauces, dressing and dips 8 2 mins max 800g/1lb 8oz

Knife blade with Cold soups Start at low 30-60 secs 2 litres/4pts

max capacity disc speed and

Milkshakes/batters increase to 15-30 secs 1.5 litres/2pts 12 fl oz

maximum

Dual whisk Egg whites 8 60-90 secs 2 – 8 (70g – 280g)

Egg & sugar for fatless sponges 8 4-5 min 3 eggs (150g)

Cream 8 30 secs 250 mls – 750mls

9 fl oz – 27 fl oz

Folding tool Whipping cream and fruit purees 1 – 2 60 secs 300g/12oz cream,

300g/12oz puree

Egg whites into heavy mixtures 1 – 2 60 secs 600g/1lb 6oz total wt

Macaroons 1 – 2 60 secs 500g/1lb 2oz total wt

Dough tool Yeasted mixes 8 60 secs 1.3Kg/ 2lb 12oz total wt

White Bread Flour 8 60 secs 650g/1lb 8oz flour wt

Wholemeal Bread Flour 8 60 secs 500g/1lb 2oz flour wt

Discs - slicing/grating Firm food items such as carrots, hard cheeses 5 – 8 –

Softer items such as cucumbers, tomatoes 1 – 5 –

Extra fine grater Parmesan cheese, potatoes for German 8 –

potato dumplings

Fine Julienne disc Potato straws and rosti 8 –

Stir fries and vegetable garnishes

Decorative slicing Firm food items such as carrots and potatoes 5 – 8 –

disc Softer food items such as cucumber

French fry disc Cuts potatoes for thin French Fries and 8 –

ingredients for casseroles and dips

(eg cucumber, apple and pear.)

Thermoresist blender Cold liquids and drinks 8 15-30 secs 1.6 litres/56 fl oz

Stock based soups 8 30 secs 1.2 litres/42 fl oz

Soups using milk 8 30 secs 1 litres/2pts

We recommend that hot ingredients are allowed to cool before blending. However should you wish to process

hot ingredients please read the Hot Blending Safety instructions.

Mini bowl and knife Meat 8 20 secs + Pulse 300g/12oz Lean beef

Chopping herbs 8 30 secs 20g/1oz

Chopping nuts 8 30 secs 100g/4oz

Mayonnaise 8 30 secs 2 Eggs

300g/12oz Oil

Purees 8 30 secs 200g/8oz

Do not fill above

the maximum capacity

marked on the bowl

10

recommended speed chart

tool/attachment function recommended processing maximum

speed time N capacities

Compact chopper/ Processing a range of spices 8 30-60 secs 100g/4oz

grinder Grinding coffee beans 8 30 secs 75g/3oz

Chopping nuts Pulse 5 secs 140g/5oz

Lean braising steak (cut into 2cm cubes) Pulse 10 secs 200g/8oz

Citrus Juicer Smaller items i.e. limes and lemons 1 – 2 – 2Kg/4lb 8oz

Larger fruits i.e. oranges and grapefruits

Juice extractor Juicing firm fruit and vegetables auto – 1Kg/2lb 4oz apples

ie apples and carrots 800g/1lb 12oz carrots

Juicing soft fruits ie grapes and auto – 500g/1lb 2oz

tomatoes

NThis is for guidance only and will vary depending on the exact recipe and ingredients being processed.

using the attachments

Refer to recommended speed chart for each attachment.

)3 knife blade

The knife blade is the most versatile of all the attachments.

The length of the processing time will determine the texture

achieved. For coarser textures use the pulse control.

Use the knife blade for cake and pastry making, chopping

raw and cooked meat, vegetables, nuts, pâté, dips, pureeing

soups and to also make crumbs from biscuits and bread.

hints

O Cut food such as meat, bread, vegetables into cubes

approximately 2cm/3/4in before processing.

O Biscuits should be broken into pieces and added down the

feed tube whilst the appliance is running.

O When making pastry use fat straight from the fridge cut into

2cm/3/4in.cubes.

O Take care not to over-process.

)4 dough tool

Use for yeasted dough mixes.

O Place the dry ingredients in the bowl and add the liquid

down the feed tube whilst the appliance is running. Process

until a smooth elastic ball of dough is formed this will take

approx. 60 secs.

O Re-knead by hand only. Re-kneading in the bowl is not

recommended as it may cause the processor to become

unstable.

)5 dual whisk

Use for light mixtures only e.g. egg whites, cream,

evaporated milk and for whisking eggs and sugar for fatless

sponges. Heavier mixtures such as fat and flour will damage

it.

using the whisk

1 Fit the detachable drive shaft and bowl onto the power unit.

2 Push each beater

 securely into the drive head.

3 Fit the whisk by carefully turning until it drops over the drive

shaft.

4 Add the ingredients.

5 Fit the lid - ensuring the end of the shaft locates into the

centre of the lid.

6 Switch on.

important

O The whisk is not suitable for making all in one

cake mixes as these mixes are too heavy and will

damage it. Always use the knife blade.

hints

O Best results are obtained when the eggs are at room

temperature.

O Ensure the bowl and whisks are clean and free from grease

before whisking.

O Heavier ingredients such as flour and dried fruit should be

folded in by hand.

O Do not exceed the maximum capacity or processing time

stated in the recommended speed chart.

)6 folding tool

Use the folding tool to fold light ingredients into heavier

mixtures for example meringues, mousses and fruit fools.

1 Fit the detachable drive shaft and bowl onto the power unit.

2 Push the paddle  securely into the drive head.

3 Fit the folding tool by carefully turning until it drops over the

drive shaft.

4 Add the ingredients.

5 Fit the lid – ensuring the end of the shaft locates into the

centre of the lid .

6 Select low speed (speed 1 -2).

to remove the beater

Detach the beater from the drive head by pressing the

release button (1.

hints

O Do not use Auto or high speed as a low speed is required to

optimise the folding performance.

O For best results do not over whisk egg whites or cream –

the folding tool will not be able to fold the mixture correctly if

the whisked mix is too firm.

O Do not fold the mixture for longer than stated in the

recommended speed chart as the air will be knocked out

and the mix will be too loose.

O Any unmixed ingredients left on the paddle or sides of the

bowl should be carefully folded in using the spatula.

)7 max capacity disc

When blending liquids, use the max capacity disc with the

knife blade. It allows you to increase the liquid processing

capacity from 1.4 litre to 2 litres, prevents leaking and

improves the chopping performance of the blade.

1 Fit the detachable drive shaft and bowl onto the power unit.

2 Fit the knife blade.

3 Add ingredients to be processed.

4 Fit the capacity disc over the top of the blade ensuring it sits

on the ledge inside the bowl (2. Do not push down on

the capacity disc.

5 Fit the lid and switch on.

slicing/grating discs

slicing discs - 4mm

)8, 2mm )9

Use the slicing side for cheese, carrots, potatoes, cabbage,

cucumber, courgette, beetroot and onions.

grating discs - 4mm ):, 2mm *1

Use the grating side for cheese, carrots, potatoes and foods

of a similar texture.

extra fine grater disc *3 (if supplied)

Grates Parmesan cheese and potatoes for German potato

dumplings.

fine julienne

*4 (if supplied)

Use to cut potatoes into straws and coarse grate for rosti,

stir fries and vegetable garnishes.

decorative slicing disc

*5 (if supplied)

Use to slice potatoes, carrot, cucumbers and foods of a

similar texture into fluted shaped slices.

French fry disc *6 (if supplied)

Cuts potatoes for thin French Fries and ingredients for

casseroles and dips (eg cucumber, apple and pear.)

safety

O Never remove the lid until the cutting disc has

completely stopped.

O Handle the cutting discs with care - they are

extremely sharp.

O Do not overfill the bowl – do not exceed the

maximum capacity level marked on the bowl.

to use the cutting discs

1 Fit the detachable drive shaft and bowl onto the power unit..

2 Holding by the centre grip, place the disc onto the drive shaft

with the appropriate side uppermost (3.

3 Fit the lid.

4 Put the food in the feed tube.

Choose which size feed tube you want to use. The pusher

contains a smaller feed tube for processing individual items

or thin food items.

To use the small feed tube – first put the large pusher inside

the feed tube.

To use the wide feed tube – fit the small pusher into the

wide pusher and turn clockwise to lock in place.

Do not fill the feed tube above the maximum level as the

processor will not operate unless the wide feed tube pusher

is fitted correctly.

5 Switch on and push down evenly with the pusher - never

put your fingers in the feed tube.

hints

O Use fresh ingredients

O Don’t cut food too small. Fill the width of the feed tube fairly

full. This prevents the food from slipping sideways during

processing. Alternatively use the small feed tube.

O When using the Julienne disc, place ingredients horizontally.

O When slicing or grating: food placed upright (4 comes out

shorter than food placed horizontally (5.

O Food placed upright comes out shorter than food placed

horizontal.

O There will always be a small amount of waste on the disc or

in the bowl after processing.

11

*7 mini bowl and knife (if supplied)

Use the mini processor bowl to chop herbs and process

small quantities of ingredients e.g. meat, onion, nuts,

mayonnaise, vegetables, purées, sauces and baby food.

Do not overfill the bowl.

a mini blade

b mini bowl

to use the mini bowl and knife

1 Fit the detachable drive shaft and bowl onto the power unit.

2 Fit the mini bowl over the detachable drive shaft - ensure the

cut out sections align with the locating tabs (6 on the main

bowl.

Note: The main bowl lid cannot be fitted if the mini bowl is

not located correctly.

3 Place the knife blade over the drive shaft (7.

4 Add the ingredients to be processed.

5 Fit the lid and switch on.

safety

O Never remove the lid until the knife blade has completely

stopped.

O The knife blade is very sharp - always handle with care.

important

O Do not process spices – they may damage the plastic.

O Do not process hard food such as coffee beans, ice cubes

or chocolate – they may damage the blade.

hints

O Herbs are best chopped when clean and dry.

O Always add a little liquid when blending cooked ingredients

to make baby food.

O Cut foods such as meat, bread, vegetables into cubes

approximately 1-2 cm (1⁄2 – 3⁄4 in) before processing.

O When making mayonnaise add the oil down the feed tube.

*8 compact chopper/grinder (if supplied)

Use the compact chopper/grinder for processing dry

ingredients such as nuts, coffee beans and it is also suitable

for processing a range of spices such as: -

Black peppercorns, cardamom seeds, cumin seeds,

coriander seeds, fennel seeds, fresh ginger root, fresh

chillies and whole cloves.

a sealing ring

b blade unit

c glass jar

to use your compact chopper/grinder

1 Put your ingredients into the jar. Fill it no more than half full.

2 Fit the sealing ring to the blade unit.

3 Hold the underside of the blade unit and insert the blades

into the jar – turn anti-clockwise to lock (8.

4 Place the compact chopper/grinder onto the power unit and

turn clockwise to lock (9.

5 Use the Auto button, or select a speed (refer to the

recommended speed chart).

safety

O Never fit the blade unit to your food processor without the

jar fitted.

O Never unscrew the jar while the compact chopper/grinder is

fitted to your appliance.

O Do not touch the sharp blades – Keep the blade unit away

from children.

O Never remove the compact chopper/grinder until the blades

have completely stopped.

O To ensure the long life of your compact chopper/grinder, do

not run it continuously for longer than 60 seconds. Switch

off as soon as you have got the right consistency.

O The appliance will not work if the compact chopper/grinder

is incorrectly fitted.

O Do not process turmeric root in the compact chopper/

grinder as it is too hard and may damage the blades.

hints

O For optimum performance when processing spices we

recommend that you do not process more than 100g at a

time in the compact chopper/grinder.

O Whole spices retain their flavour for a much longer time than

ground spices so it is best to grind a small quantity fresh at

a time to retain the flavour.

O To release the maximum flavour and essential oils whole

spices are best roasted prior to milling.

O Cut ginger up into small pieces before processing.

O For best results the mini bowl attachment is recommended

when chopping herbs.

*9 citrus juicer (if supplied)

Use the citrus juicer to squeeze the juice from citrus fruits

(eg oranges, lemons, limes and grapefruits).

a cone

b sieve

to use the citrus juicer

1 Fit the bowl onto the power unit, add the detachable drive

shaft.

2 Fit the sieve into the bowl - ensuring the sieve handle is

locked into position directly over the bowl handle (:.

3 Place the cone over the drive shaft turning until it drops all

the way down )1.

4 Cut the fruit in half. Then switch on and press the fruit onto

the cone.

O The citrus juicer will not operate if the sieve is

not locked correctly.

O For best results store and juice the fruit at room temperature

and hand roll on a worktop before juicing.

O To help with juice extraction move the fruit from side to side

when juicing.

O When juicing large quantities, empty the strainer regularly to

prevent the build up of pulp and seeds.

12

*: metal juice extractor (if supplied)

Use the centrifugal juicer for making juice from firm fruit and

vegetables.

a pusher

b lid

c pulp remover

d filter drum

e bowl

f juicing spout

g juice extractor drive adaptor

to use the juice extractor

1 Fit the drive adaptor onto the power unit )2 – push down

lightly to ensure the adaptor is located correctly.

2 Then fit the bowl. Place the handle towards the back and

turn clockwise until it locks )3.

3 Place the pulp remover into the filter drum - ensuring the

tabs locate with the slots in the bottom of the drum )4.

4 Fit the filter drum )5.

5 Place the attachment lid onto the bowl, turn until it locks

and the feed tube sits over the handle )6. Your juice

extractor will not operate if the bowl or lid are

not fitted correctly into the interlock.

6 Place a suitable glass or jug under the juice outlet.

7 Cut the food to fit the feed tube.

8 Select Auto and push down evenly with the pusher - never

put your fingers in the feed tube. Process fully before

adding more.

O After adding the last piece, let the juice extractor run for

a further 30 seconds to extract all the juice from the filter

drum.

safety

O Do not use the juice extractor if the filter is

damaged.

O Only use the pusher supplied. Never put your fingers in the

feed tube. Unplug before unblocking the feed tube.

O Before removing the lid, switch off and wait for the filter to

stop.

important

O If the juice extractor starts to vibrate, switch off and empty

the pulp from the drum. (The juice extractor vibrates if the

pulp becomes unevenly distributed).

O Maximum capacity that can be processed at one time is

1Kg of fruit or vegetables (refer to speed chart).

O Some very hard foods may make your juice extractor slow

down or stop. If this happens switch off and unblock the

filter.

O Switch off and clear the pulp collector regularly during use.

hints

O Before processing remove stones and pips (eg pepper,

melon, plum) and tough skins (eg melon, pineapple). You

don’t need to peel or core apples and pears.

O Use firm, fresh fruit and vegetables.

O To maximise juice extraction place small quantities at a time

in the feed tube and push down slowly.

O Citrus fruit - peel and remove the white pith, otherwise the

juice may taste bitter. For best results use the citrus juicer.

*2 attachment storage box

Your food processor is supplied with a storage box for your

bowl attachments and discs.

1 Fit the knife blade and discs into the storage box when not

in use )7.

2 The storage box is fitted with a safety lock - close the lid to

lock. To open, push the tab in )8 and lift up the lid )9.

care & cleaning

O Always switch off and unplug before cleaning.

O Handle the blades and cutting discs with care -

they are extremely sharp.

O Some foods may discolour the plastic. This is perfectly

normal and won’t harm the plastic or affect the flavour

of your food. Rub with a cloth dipped in vegetable oil to

remove the discolouration.

power unit

O Wipe with a damp cloth, then dry. Ensure that the interlock

area is clear of food debris.

O Don’t immerse the power unit in water.

O Store excess cord in the storage area at the back of the

power unit ):.

blender and compact chopper/grinder

1 Empty the goblet/jar, unscrew the blade unit by turning to

the unlock position to release.

2 Wash the goblet/jar by hand.

3 Remove and wash the seals.

4 Don’t touch the sharp blades – brush them clean using hot

soapy water, then rinse thoroughly under the tap. Don’t

immerse the blade unit in water.

5 Leave to dry upside down.

dual whisk

O Detach the beaters from the drive head by gently pulling

them free. Wash in warm soapy water.

O Wipe the drive head with a damp cloth, then dry. Do not

immerse the drive head in water.

folding tool

O Detach the beater from the drive head by pressing the

release button (1. Wash in warm soapy water.

O Wipe the drive head with a damp cloth, then dry. Do not

immerse the drive head in water.

centrifugal juicer

O The cutting blades on the base of the filter drum are very

sharp, take care when handling and cleaning the drum.

O Some foods may discolour the plastic. This is perfectly

normal and won’t harm the plastic or affect the flavour

of your food. Rub with a cloth dipped in vegetable oil to

remove the discolouration.

juice drive adaptor

O Wipe with a damp cloth, then dry

O Do not immerse the adaptor in water.

13

all other parts

O Wash by hand, then dry.

O Alternatively they are dishwasher safe and can be washed

on the top rack of your dishwasher. Avoid placing items

on the bottom rack directly over the heating element. A

short low temperature (Maximum 50°C) programme is

recommended.

service & customer care

O If you experience any problems with the operation of

your appliance, before requesting assistance refer to the

“troubleshooting guide” section in the manual or visit

www.kenwoodworld.com.

O Please note that your product is covered by a warranty,

which complies with all legal provisions concerning any

existing warranty and consumer rights in the country where

the product was purchased.

O If your Kenwood product malfunctions or you find any

defects, please send it or bring it to an authorised

KENWOOD Service Centre. To find up to date details of

your nearest authorised KENWOOD Service centre visit

www.kenwoodworld.com or the website specific to your

Country.

O Designed and engineered by Kenwood in the UK.

O Made in China.

IMPORTANT INFORMATION FOR CORRECT

DISPOSAL OF THE PRODUCT IN ACCORDANCE

WITH THE EUROPEAN DIRECTIVE ON WASTE

ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

At the end of its working life, the product must not be disposed

of as urban waste.

It must be taken to a special local authority differentiated waste

collection centre or to a dealer providing this service.

Disposing of a household appliance separately avoids possible

negative consequences for the environment and health deriving

from inappropriate disposal and enables the constituent

materials to be recovered to obtain significant savings in

energy and resources. As a reminder of the need to dispose of

household appliances separately, the product is marked with a

crossed-out wheeled dustbin.

14

item suitable for

dishwashing

main bowl, mini bowl, lid, pusher 

knife blades, dough tool 

detachable drive shaft 

discs 

max capacity disc 

whisk beaters/folding tool paddle 

Do not immerse the drive head in

water

blender goblet, lid, filler cap 

blade unit and seal for blender 

blade unit and seal for compact 

chopper/grinder

compact chopper/grinder jar 

citrus juicer 

metal juice extractor 

juice drive adaptor 

spatula 

15

troubleshooting guide

Problem Cause Solution

The processor will not operate. No Power. Check processor is plugged in.

No power/indicator light not lit.

Bowl not fitted to power unit correctly. Check bowl is located correctly

and the handle is situated

towards the right hand side.

Bowl lid not locked on correctly. Check that the lid interlock is

located correctly into the

handle area.

The processor will not

work if the bowl and lid

are fitted incorrectly.

Eco function operating. Press either the Auto Button or

turn speed control on, then

return to ‘O’ to switch off Eco

function.

If none of the above check the

fuse/circuit breaker in your home.

Compact chopper/grinder will not operate. Compact chopper/grinder not locked on correctly. The compact chopper/grinder will

not operate if fitted incorrectly to

the interlock.

Compact chopper/grinder not assembled correctly. Check blade unit is fully tightened

onto the compact chopper/grinder

jar.

Blender will not operate. Blender not locked on correctly. The blender will not operate if

fitted incorrectly to the

interlock.

Blender not assembled correctly. Check blade unit is fully

tightened into the goblet.

Processor stops or slows Overload protection operated. Switch off, unplug and allow

during processing. Processor overloaded or overheated during the appliance to cool down for

operation. approximately 15 minutes.

Maximum capacity exceeded. Refer to the speed chart for

maximum capacities to

process.

Weighing function

Display screen freezes on [- - - -]. Quantity weighed too small. Use teaspoon and tablespoon

measures for very small

quantities.

Weight changed on display screen. Power unit moved during operation. Do not move unit during use.

Zero the display before

weighing next ingredients.

Power On light flashing rapidly. Normal operation. Check interlocks are engaged

The light will flash if the bowl, lid or blender are correctly.

not fitted to the power unit or not locked in

place correctly.

Power On light flashing slowly. Normal operation.

Food processor left plugged in for over 30 minutes Press either the Auto Button or

without being operated and gone into Eco mode. turn speed control on and then

return to ‘O’ to switch off Eco

function.

Auto and Power On light flashing. Normal operation. Check interlocks are engaged

The light will flash if the Auto selected but correctly or press the Auto

interlocks not engaged. button to switch off the Auto

function.

16

troubleshooting guide

Problem Cause Solution

Blender or compact chopper/grinder Seal missing. Check seal is fitted correctly and

leaking from blade assembly base. Seal incorrectly fitted. not damaged. To obtain a

Seal damaged. replacement seal see

“service & customer care”.

Blender seal missing from blade unit when The seal is packed pre-fitted to the blade unit. Unscrew goblet and check that

removed from packaging. seal is fitted to blade unit.

To obtain a replacement seal

see “service & customer care”.

Poor performance of tools/attachments. Refer to hints in relevant “using the attachment” section. Check attachments are

assembled correctly.

veiligheid

OLees deze instructies zorgvuldig door en bewaar ze voor toekomstig

gebruik.

OVerwijder de verpakking en alle labels.

OAls de stekker of het snoer beschadigd is, moet het om veiligheidsredenen

door Kenwood of een door Kenwood geautoriseerd reparatiebedrijf

vervangen worden, om gevaar te voorkomen.

ODe messen en de schijven zijn erg scherp; ga er dus voorzichtig mee om.

Houd ze bij het hanteren en schoonmaken altijd bovenaan bij

de vingergreep en weg van het snijvlak, vast.

OTil de keukenmachine niet bij het handvat op en draag hem evenmin op

die manier; hierdoor kan het handvat afbreken, waardoor u letsel kunt

oplopen.

OVoordat u de inhoud uit de kom giet, dient u altijd eerst het mes te

verwijderen.

OHoud uw handen en keukengereedschap uit de kom van de

keukenmachine en de beker van de blender, wanneer deze op het lichtnet

is aangesloten.

OSchakel het apparaat uit en haal de stekker uit het stopcontact:-

O

voordat u onderdelen aanbrengt of verwijdert;

O

als u het apparaat niet gebruikt;

O

voor het reinigen.

OGebruik nooit uw vingers om voedsel in de invoerkoker te duwen. Gebruik

altijd de bijgeleverde stamper.

OZet het mes nooit op het motorblok zonder dat de beker van

de blender of het compacte hak/molenhulpstuk is bevestigd.

OVoordat u het deksel van de kom haalt of de blender of het compacte

hak/molenhulpstuk van het motorblok verwijdert:-

O

zet het apparaat uit;

O

wacht totdat de hulpstukken / messen helemaal tot stilstand zijn

gekomen;

O

zorg dat u de blenderbeker of het compacte hak/molenhulpstuk niet

losschroeft van de messeneenheid.

O Verwerk hete ingrediënten NIET in de kom van de keukenmachine.

OGebruik nooit het deksel om de keukenmachine te bedienen, maar altijd de

aan/uit-knop.

OAls teveel kracht wordt uitgeoefend op het

vergrendelingsmechanisme, wordt dit apparaat beschadigd

en kan het letsel veroorzaken.

OHaal de stekker altijd uit de keukenmachine wanneer u hem

niet gebruikt.

17

Nederlands

Vouw voor het lezen a.u.b. de voorpagina met illustraties uit

OGebruik nooit een niet bij het apparaat behorend hulpstuk.

OLaat het apparaat nooit onbeheerd terwijl het aan staat.

OGebruik nooit een beschadigd apparaat. Laat het nakijken of repareren:

zie Onderhoud en klantenservice.

OLaat het motorhuis, het netsnoer of de stekker nooit nat worden.

OLaat het snoer nooit over de rand van een tafel of werkblad hangen of in

aanraking komen met hete oppervlakken.

OU mag de maximum capaciteit die in de snelheidstabel wordt aangegeven,

niet overschrijden.

ODit apparaat mag niet door kinderen worden gebruikt. Houd het apparaat

en het snoer buiten het bereik van kinderen.

OOp kinderen moet toezicht gehouden worden om er zeker van te zijn dat

ze niet met het apparaat spelen.

ODit apparaat kan worden gebruikt door personen met verminderde

lichamelijke, sensorische of geestelijke capaciteiten of gebrek aan ervaring

en kennis mits ze onder toezicht staan of instructie hebben gekregen over

het veilige gebruik van het apparaat, en de betrokken risico’s begrijpen.

OGebruik het apparaat alleen voor het huishoudelijke gebruik waarvoor

het is bedoeld. Kenwood kan niet aansprakelijk worden gesteld in als het

apparaat is misbruikt of als deze instructies niet zijn opgevolgd.

OMisbruik van uw keukenmachine/blender kan tot letsel leiden.

OHet maximum vermogen is afhankelijk van het hulpstuk dat de grootste

hoeveelheid energie verbruikt. Andere hulpstukken verbruiken misschien

minder energie.

Raadpleeg de betreffende paragraaf onder De hulpstukken gebruiken voor

aanvullende veiligheidswaarschuwingen voor ieder hulpstuk afzonderlijk.

veiligheid m.b.t. de blender

OKANS OP BRANDWONDEN: Laat hete ingrediënten altijd tot

kamertemperatuur afkoelen voordat u ze in de beker plaatst of verwerkt.

OWees voorzichtig wanneer u de messen hanteert en raak het snijvlak van

de messen bij het reinigen niet aan.

OWees voorzichtig wanneer u hete vloeistof in de blender giet, omdat deze

vloeistof plotseling in de vorm van stoom weer uit het apparaat gestoten

kan worden.

OLaat de blender uitsluitend voorzien van deksel lopen.

OGebruik de kan uitsluitend met de bijgeleverde messen.

ODe blender nooit leeg gebruiken.

OOm een lange levensduur van uw blender te garanderen, mag u hem nooit

langer dan 60 seconden gebruiken.

18

Leht laadib ...